High Lumen LED Canopy Light SLL017-4X60W-XPW-001 Replaces 400 Watt Metal Halide — Uses Only 174 Watts — Operates on 100-to-277VAC — 110˚ Beam Spread ■FEATURES ■APPLICATIONS Warranty: 5 Year LEDtronics Limited Warranty ■■ Super Intensity: 5,685 Max. Candelas ■■ Low Energy Consumption: Only 174 Watts @ 120VAC ■■ Suitable for Damp Locations ■■ Solid-State: High-Shock- & HighVibration-Resistant ■■ Quick Mounting: Simple, 2-Fastener ■■ Meets IP65 Requirements: Totally Protected against Dust; Protected against Low-Pressure Jets of Water from All Directions. Limited Ingress Permitted. ■■ Life Expectancy: 11.4 Years (Based on 12 Hrs/Day) Long Lifespan: White LED Lumen Maintenance Greater than 70% at 50,000 Hours of Operation (Rated average life based on engineering testing and probability analysis) ■■ Wide-Range Input Voltage: 100-277 VAC ■■ Electronic Instant-Start: “Instant On” with No Delay in Re-strike ■■ Optimized Circuitry: Power Factor Corrected for Maximum Efficiency ■■ Input Power Surge Protection: Onboard 40kA Varistor ■■ Wide Ambient Operating Temperature Range: ~-22°F to ~+122°F ■■ Safety Assurance: ETL Listed ■SPECIFICATIONS ■■ 5000K~5700K Viewing Angle H 106˚/ V 94˚ [Full Beam Width @ 50% Intensity] Beam Pattern Type V (Circular) Color Rendering Index 74 Input Voltage 100 - 277 VAC [Tested @ 120VAC] Energy Used 174 Watts Input Current 1.350 ~ 1.700 A Efficacy 91 lm/Watt Power Factor 0.99 Total Lumens 15883 lm Max. Candela 5685 cd Safety Rating IP65 Ambient Operating Temp. ~-22°F to ~+122°F (~-30°C to ~+50°C) Pipe Mounting Diameter Surface mount / Side KOs for ½” Conduit Dimensions W18.74” x H13.58”(W476mm x H345mm) Weight 39 lbs / 17.7 kg © 2014 LEDtronics, Inc. ■■ Low Maintenance: Lowers Costs by Reducing Relamping and Rebalasting Frequency Parking Areas ■■ Entrances, Walkways, Underpasses ■■ Rail Depots ■■ Suitable for Damp Locations ARRA Compliant ■■ Eco-Friendly: No Mercury Content, No Lead ■■ No Hazardous Emissions: No UV or IR Radiation – Does Not Attract Insects; No RF Interference 9001:2008 CERTIFIED by DNV Even Lighting: High Intensity / No Halation ■■ Instant Light: No Flicker or Delayed Startup Time ■■ Cool Operation: Doesn’t Get Hot to the Touch ■■ Housing: Heavy-Duty Die-Cast Aluminum ■■ Lens: High-Impact/Heat-Resistant Borosilicate Prismatic Glass for Wide, Uniform Light Distribution ■■ Sealant: Silicone Rubber Gasket between Fixture Pan and Exterior Housing ■■ Finish: Baked, White-Powder-Coated (Paint after Fabrication) ■■ ½” Tapped Holes Available for Installing Photocell (optional) 5.63” 142.9mm 17.82” [452.5mm] ISO ■■ ■CONSTRUCTION 15.13” [384.2mm] 13.78” [349.9mm] Color Temperature Major Energy Savings: Over 60% Compared to HID Lamps 18.79” [477.1mm] Pure White Made in the USA from Imported Parts – Meets Buy American Requirements within the ARRA Program Loading Docks ■■ White LED technology is patent protected in the United States. LEDtronics white LED products are covered under these patents. 23105 Kashiwa Court, Torrance, CA 90505 Phone: (800) 579.4875 / (310) 534.1505 Fax: (310) 534.1424 E-mail: [email protected] Website: ledtronics.com Check LEDTRONICS.COM for latest data. Printed material may be outdated. Emitted Color ■■ ■■ LOG # 312 / Rev 010-2014 SLL017-4X60W-XPW-001 DesignLights™ Consortium Approved; Appears on DLC Qualified Products List — May Benefit from Various Government Incentives Manufacturing/ Factory Floors/ Warehouses ■BENEFITS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE PART NO. ■■ 14.97” [380.1mm] ■■ ■■ w w w. L E D t r o n ic s. co m ■■ High Lumen LED Canopy Light w w w. L E D t r o n ic s. co m 18 FEET PACKAGE INCLUDES: Tamper-proof Screws and Tool, 2” Snap-in Bushing 24 FEET © 2014 LEDtronics, Inc. Page 2 SLL017-4X60W-XPW-001