High-Power LED PAR30 Frosted Floodlights PAR30A-10W-XxW-001W Consumes Only 9 Watts – Directly Replaces Incandescents up to 75 Watts – Up to 85% Energy Savings Operates on 90-290VAC — 3000K or 5000K CCT — 100° Wide Beam — E26/E27 Screw Base ■FEATURES Lamp Warranty: 3 Years ■■ Semi-Frosted Diffusing Lens ■■ Easy Installation into Existing PAR30 Fixtures with 26mm Edison Base ■■ White Color Choice: Sunlight-Visible 3000K Warm / 5000K Pure White ■■ Very Low Power Consumption: Only 9 Watts ■■ ■■ Long Lifespan: White LED Lumen Maintenance Greater than 70% at 35,000 Hours of Operation (Rated average life based on engineering testing and probability analysis) ■■ ■■ Track, Lighting, Accent Lighting ■■ Floodlight/Security Light/ Emergency Light High CRI Enhances All Colors ■■ ■■ Solid-State: High-Shock & High-Vibration-Resistant General/Architectural and Landscape ■■ ■■ Wide Ambient Oper. Temp. Range: ~-4°F to ~+113°F [~-20°C to ~+45°C] Display Case Fixtures and Cabinet Lighting ■■ Aerospace Lighting Systems ■■ Industrial OEM Equipment Lighting ■■ Bio-Medical and Medical Applications ■■ Wide Input Voltage Range: 90-290 VAC For Use in Dry Areas Only – Not for Use Where Exposed to Weather. Not for Use in Totally Enclosed Recessed Fixtures 3.72” 94.5mm Warm White Not for Use with Dimmers 1.72” 43.7mm White LED technology is patent protected in the United States. LEDtronics white LED products are covered under these patents. Ø3.72” Ø94.5mm Wide Angle 0.195” [4.95mm] SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ■SPECIFICATIONS PAR30A-10W-XxW-001W Input Voltage 90-290 VAC [Tested @120VAC] Ambient Operating Temp. ~-4°F to ~+113°F [~-20°C to ~+45°C] Lens Base Body E26 Silver Semi-Frosted Edison Screw-in Diffusing / E27 Body Color Silver Lens Frosted Dimensions L3.72” x D03.72 [94.5mm x 094.5mm] Weight 0.475 lb / 7.6 oz / 215.5g PART NUMBER INPUT CURRENT ENERGY USED EFFICACY ■CAUTION NOTES ■■ Risk of electrical shock. Not for use where directly exposed to water. Intended for indoor use or in a weather-protected fixture only. ■■ For use with standard ON/ POWER FACTOR TOTAL LUMENS MAXIMUM CANDELA 8.9 Watts 77 lm/W 0.99 685 lm EMITTED COLOR VIEWING ANGLE* © 2012 LEDtronics, Inc. 0.113A 8.0 Watts 79 lm/W 0.59 631 lm ■■ Long Life/Low Maintenance: Lowers Costs By Reducing Relamp Frequency ■■ Even Lighting: High Intensity / No Halation ■■ Eco-Friendly: No Mercury Content, No Lead ■■ No Extraneous Emissions: No UV or IR Radiation – Does Not Attract Insects ■■ Reduces Light Pollution: No Wasted Light, “Dark Skies Initiative”-Friendly ■■ Cool Operation: Doesn’t Get Hot to the Touch – Reduces A/C Load, Fire Hazard (*Full Beam Width @ 50% Intensity) 262 cd 86 2800K~3200K Warm White 100° 241 cd 76 5000K~6000K 102° PURE WHITE PAR30A-10W-XPW-001W Major Energy Savings Compared to Incandescents/Halogens ISO Pure White 9001:2008 CERTIFIED by DNV 23105 Kashiwa Court, Torrance, CA 90505 Phone: (800) 579.4875 / (310) 534.1505 Fax: (310) 534.1424 E-mail: [email protected] Website: http://www.ledtronics.com Check LEDTRONICS.COM for latest data. Printed material may be outdated. 0.075A ■■ emergency exit fixtures or emergency lights. COLOR TEMP. CRI ■BENEFITS ■■ Not intended for use with OFF switches only, not WARM WHITE PAR30A-10W-XIW-001W with a dimmer. Use with any type of dimmer, relay or other current/voltage control circuit device will void warranty. Ideal for Use with Alternate or Renewable Energy Resources – Solar & Wind Power LOG 410 / Rev 07 -2012 PART NUMBER w w w. LE D t r o n i c s .co m ■■ ■APPLICATIONS Pure White w w w. LE D t r o n i c s .co m PAR30A-10W-XIW-001W PAR30A-10W-XPW-001W © 2012 LEDtronics, Inc. Page 2 High-Power LED PAR30 Soft Floodlights