Rack and Panel

ca_H1-H116:Layout 1
2/10/11
8:22 AM
Page 1
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 77
MIL-C-83733
DPK
HIGH-PERFORMANCE MIL-C-83733 QUALIFIED
Temperature Ranges of - 65 C to +200 C
Environment - Resistant
H
How to Order
MIL-C-83733 (USAF) Nomenclature
*RoHS Finish
Electroless Nickel
PEC FS 4971 Code R
RoHS version
R - RoHS compatible
SHELL SIZE
A - Small shell
B - Large shell
CONTACT MODIFICATION
G-MIL-C-38999 contacts. Size 22D for
DPKA-131 and DPKB-185 contact arrangements
only.
W-MIL-C-38999 type contacts. Size 22D wrap
posts for DPKA-131 and DPKB-185 layouts. .025
(0.63) square posts for .340(8.64); extension
from grommet face.
CONTACT ARRANGEMENT
Shell Size A-18. 32, 51 and 131 (MIL-STD-1531).
Shell Size B-48, 64, 78, 101 59W7, 71, 71C15,
161 and 185 (MIL-STD-1532).
CONTACT TYPE
P-Pin (Receptacle Connectors)
S-Socket (Plug Connectors)
POLARIZATION
Six-position shell polarization accomplished with
Polarizing pins mounted on each end of shell
flange. Available on mounting style A only.
MOUNTING STYLES
A - Two mounting holes .197(5.00) diameter
(for either nuts or jackscrews ordered seprately) and two polarizing posts. (Replaces
Mounting Style B.)
C - Four MS24700-2 bushings, included for the
receptacle (M83733/5).
83733/4
*
*
G K -
R
B 101
BASIC SPECIFICATION
SPECIFICATION SHEET NUMBER
CLASS: R - ENV IRONMENT RESISTANT
SHELL SIZE
CONTACT ARRANGEMENT
ITT Nomenclature
DPK
DPK
R*
R*
A
B
- G
- G
131
185
P
S
7
7
F0
F0
SERIES PREFIX
ITT DESIGNATION
RoHS
SHELL SIZE
CONTACT MODIFICATION
CONTACT ARRANGEMENT
CONTACT TYPE
POLARIZATION (applicable to mounting style A)
CONNECTOR MOUNTING STYLE CONNECTOR
CONNECTOR MODIFICATION CODE
FURNISHED LESS CONTACTS
(will not be stamped on connector).
G - Four .281(7.14) diameter holes (for
MS24700-2 bushings or 231-0019-000
spring mounts) (M83733/1).
H- Two mounting hole flange. Two (231-0019000) spring mounts on the plug and two
MS24700-2 bushing mounts on the receptacle (M83733/10/12).
K - Four captivated, non-rotating spring mounts
an the plug (M83733/4).
M- Two mounting hole flange. Two mounting
holes .281(7.14) diameter (for MS24700-2
bushings or 231-0019-000 spring mounts)
(M83733/9).
F - Four (4) clinch nuts jNo. 6-32 thread)
M83733/6.
X - Two guide pins with two (231-0019-000)
spring mounts on the plug and two guide
sockets with two .197(5.00) diameter holes
on the receptacle (M83733/2; /3)
Y - Two guide sockets with two (231-0019000) spring mounts on the plug and two
guide pins with .197(5.00) diameter holes
on the receptacle (M83733/7; /8).
Z - Two staggered clinch nuts an the receptacle
(No. 6-32 thread) (MB3733/11).
CONNECTOR MODIFICATION CODE
- 7 standard product line, environment resistant
per MIL-C-83733(USAF). QPL M83733
Ref JDrive Product Information
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
M
MILITARY PART NUMBER INDICATOR
H-77
Rack and Panel
The Cannon DPK series are high performance environment- resistant, rectangular connectors qualified
to MIL-C-83733 (USAF). They feature crimp snapin contacts in the dependable LITTLE CAESAR® rear
release contact retention assembly. This field-proven assembly permits contacts to be inserted and
extracted at the rear of the connector. Contacts are
qualified to military specifcations and are crimped
with MIL-C-22520 crimp tools, using standard locators.
The versatile DPK Connector is suitable for many
applications, particularly where environment or
thermal protection is mandatory and high reliability
is a design requirement.
These high performance connectors are available in
two shell sizes with a variety of mounting configurations. There are 13 contact arrangements available
accommodating from 18 to
185 standard contacts. The
standard contacts are available in sizes 12, 16, 20 and
22D. Shells are a die-cast
aluminum alloy with eiectroless nickel finish. Insulators are a high grade,
glass reinforced, resin conforming to MIL-M-14
which meets or exceeds the requirements of
MIL-C-83733. Silicone rubber is used for wire
sealing grommets, interfacial and peripheral
seals.
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 78
MIL-C-83733
DPK
Performance and Material Specifications
MATERIALS
FINISHES
MECHANICAL FEATURES
Diecast aluminum alloy A-380 per QQ-A-591 Shell
Shell
Insulator
Thermosetting Plastic/Thermoplastic
Contacts
Copper allowy per QQ-C-533
Grommets and Seals Silicone base elastomer
Mounting hardware
Electroless nickel plate per
MIL-C-26074, Class 3
Gold over suitable underplate per
MIL-C-39029
Passivate/Cadmium plate
Contacts
Hardware
Shell Sizes
A (DPKA); B (DPKB)
Coupling
Friction, spring mount or jackscrew-coupling nut
Contact Arrangements A-18,32,51,G131
B-48,64,78,101,59W7,71,71C15,161
G185
Contact Termination
Stainless stell/Alloy steel
Crimp
ELECTRICAL
H
Sealing Range
Wire Diameter
Number of contacts: 18 thru 185
Wire Accommodation
(AWG)
Rack and Panel
Contact
Sizes
Min.
Max.
22D
22,24,26
.030(0.76)
.060(1.52)
20
20,22,24
.040(1.02)
.083(2.11)
16
16,18
.063(1.60
.103(2.62)
12
12,14
.081(2.06)
.158(4.01)
12
RG-179/U
.081(2.06)
.158(4.01)
Shielded
Max. current carrying capacity of contacts
Contact Size:
#12
#16
#20
#22
Amperage:
23
13
7.5
5.0
Test Voltages (AC-RMS)
Service Ratings (M&l)
Altitude
(feet)
Equivalent
Pressure
(Torr)
M
l
M
l
Unmated
161
Arrangement
Sea level
-
1300
1800
1300
1800
1000
50,000
87.5
800
1000
550
600
350
70,000
35.5
800
1000
350
400
250
110,000
5.74
800
1000
200
200
150
Mated
Unmated
Cross Reference From Military to Cannon Part Numbers
MIL-SPEC P/N
M83733/1RA018
M83733/1RA032
M83733/1RA051
M83733/1RA131
M83733/1RB048
M83733/1RB064
M83733/1RB071
M83733/1RB71C
M83733/1RB078
M83733/1RB101
M83733/1RB185
M83733/2RA018
M83733/2RA032
M83733/2RA051
M83733/2RA131
M83733/2RB048
M83733/2RB064
M83733/2RB071
M83733/2RB71C
M83733/2RB078
M83733/2RB101
M83733/3RA018
M83733/3RA032
M83733/3RA051
M83733/3RA131
M83733/3RB048
M83733/3RB064
M83733/3RB071
M83733/3RB71C
M83733/3RB078
M83733/3RB101
M83733/3RB185
ITTC P/N
DPKA-18PG-7
DPKA-32PG-7
DPKA-51PG-7
DPKA-G131PG-7
DPKB-48PG-7
DPKB-64PG-7
DPKB-71PG-7
DPKB-71C15PG-7
DPKB-78PG-7
DPKB-101PG-7
DPKB-G185PG-7
DPKA-18SX-7
DPKA-32SX-7
DPKA-51SX-7
DPKA-G131SX-7
DPKB-48SX-7
DPKB-64SX-7
DPKB-71SX-7
DPKB-71C15SX-7
DPKB-78SX-7
DPKB-101SX-7
DPKA-18PX-7
DPKA-32PX-7
DPKA-51PX-7
DPKA-G131PX-7
DPKB-48PX-7
DPKB-64PX-7
DPKB-71PX-7
DPKB-71C15PX-7
DPKB-78PX-7
DPK- 101PX-7
DPKB-G185PX-7
MIL-SPEC P/N
M83733/4RA018
M83733/4RA032
M83733/4RA051
M83733/4RA131
M83733/4RB048
M83733/4RB064
M83733/4RB071
M83733/4RB71C
M83733/4RB078
M83733/4RB101
M83733/4RB185
M83733/5RA018
M83733/5RA032
M83733/5RA051
M83733/5RA131
M83733/5RB048
M83733/5RB064
M83733/5RB71C
M83733/5RB078
M83733/5RB101
M83733/5RB185
M83733/5RB071
M83733/6RA018
M83733/6RA032
M83733/6RA051
M83733/6RA131
M83733/6RB048
M83733/6RB064
M83733/6RB071
M83733/6RB71C
M83733/6RB078
M83733/6RB101
M83733/6RB185
ITTC P/N
DPKA-18SK-7
DPKA-32SK-7
DPKA-51SK-7
DPKA-G131 SK-7
DPKB-48SK-7
DPKB-64SK-7
DPKB-71SK-7
DPKB-71C15SK-7
DPKB-78SK-7
DPKB-101 SK-7
DPKB-G185SK-7
DPKA-18PC-7
DPKA-32PC-7
DPKA-51PC-7
DPKA-G131 PC-7
DPKB-48PC-7
DPKB-64PC-7
DPKB-71C15PC-7
DPKB-78PC-7
DPKB-101PC-7
DPKB-G185PC-7
DPKB-71PC-7
DPKA-18PF-7
DPKA-32PF-7
DPKA-51PF-7
DPKA-G131 PF-7
DPKB-48PF-7
DPKB-64PF-7
DPKB-71PF-7
DPKB-71C15PF-7
DPKB-78PF-7
DPKB-101 PF-7
DPKB-G185PF-7
MIL-SPEC P/N
M83733/7RA018
M83733/7RA032
M83733/7RA051
M83733/7RA131
M83733/7RB048
M83733/7RB064
M83733/7RB071
M83733/7RB71C
M83733/7RB078
M83733/7RB101
M83733/8RA018
M83733/8RA032
M83733/8RA051
M83733/8RA131
M83733/8RB048
M83733/8RB064
M83733/8RB071
M83733/8RB71C
M83733/8RB078
M83733/8RB101
M83733/9RA018
M83733/9RA032
M83733/9RA051
M83733/9RB048
M83733/9RB064
M83733/9RB071
M83733/9RB71C
M83733/9RB078
M83733/9RB101
ITTC P/N
MIL-SPEC P/N
DPKA-18SY-7
DPKA-32SY-7
DPKA-51SY-7
DPKA-G131SY-7
DPKB-48SY-7
DPKB-64SY-7
DPKB-72SY-7
DPKB-71C15SY-7
DPKB-78SY-7
DPKB-101 SY-7
DPKA-18PY-7
DPKA-32PY-7
DPKA-C131PY-7
DKA-G131P-7
DPKB-48PY-7
DPKB-64PY-7
DPKB-71PY-7
DPKB-71C15PY-7
DPKB-78PY-7
DPKB-101PY-7
DPKA-1BPM-7
DPKA-32PM-7
DPKA-51PM-7
DPKB-48PM-7
DPKB-64PM-7
DPKB-71PM-7
DPKB-71C15PM-7
DPKB-78PM-7
DPKB-101PM-7
M83733/10RA018
M83733/10RA032
M83733110RA051
M83733/10RB048
M83733/10RB064
M83733/10RB071
M83733/10RB71C
M83733/10RB078
M83733/10RB101
M83733/11RA018
M83733/11RA032
M83733/11RA051
M83733/11RB048
M83733/11RB064
M83733/11RB071
M83733/11RB71C
M83733/11RB078
M83733/11RB101
M83733/12RA018
M83733/12RA032
M83733/12RA051
M83733/12RB048
M83733/12RB064
M83733/12RB071
M83733/12RB71C
M83733/12RB078
M83733/12RB101
ITTC P/N
DPKA- 18PH-7
DPKA-32PH-7
DPKA-51PH-7
DPKB-48PH-7
DPKB-64PH-7
DPKB-71PH-7
DPKB-71C15PH-7
DPKB-78PH-7
DPKB-101PH-7
DPKA-18PZ-7
DPKA-32PZ-7
DPKA-51PZ-7
DPKB-48PZ-7
DPKB-64PZ-7
DPKB-71PZ-7
DPKB-71C15PZ-7
DPKB-78PZ-7
DPKB-101 PZ-7
DPKA-18SH-7
DPKA-32SH-7
DPKA-51SH-7
DPKB-48SH-7
DPKB-64SH-7
DPKB-71SH-7
DPKB-71C15SH-7
DPKB-78SH-7
DPKB-101SH-7
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
H-78
www.ittcannon.com
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 79
MIL-C-83733
DPK
Test Data
The following is a presentation of the certified
capabilities of Cannon's DPK, high performance,
rectangular, rack and panel series connectors with
respect to critical qualification performance and
design requirements of MIL-C-83733. The data
presented herein is a condensation of authentic
qualification test data extracted from the original
qualification reports on file at the ITT Cannon Test
Laboratory.
The successful completion of the conducted qualification program clearly demonstrates the compliance of ITT Cannon, DPK series connectors and
contacts to meet or exceed the performance requirements of MIL-C-83733.
subjected to the qualification test sequence of
MIL-C-83733.
Identification of Qualification Specimens
The DPK connectors listed below represent the
description and identification of the test specimens
Table I below, lists the conducted tests executed in
accordance with the applicable test paragraphs of
MIL-C-83733, with the Test Level, Parrameter
Limits and Measured Values listed in Table 11.
TABLE 1
DPKA-G-131PC-7 (Receptacle) DPKB-G185PC-7 (Receptacle)
DPKA-G131SK-7 (Plug)
DPKA-G185SK-7 (Plug)
DPKA-G-131PC-7 (Receptacle) DPKB-G185PC-7 (Receptacle)
TEST PERFORMED
Test Description
Test Description
Test Description
Examination Of Product
visual Examination
Sample Preparation
Insulation Resistance - 25˚C
Withstanding Voltage - Sea Level
Withstanding Voltage - Altitude
Contact Resistance
Contact Separating Forces
Connector Mating and Unmating Forces
Contact Retention
Endurance
Gold Plating Porosity
Temperature Life
Insulation Resistance - 200˚C
Low Leve Contact Resistance
Thermal Shock
Crimp Potential Drop
Vibration (Random)
Physical Shock
Ozone Exposure
Fluid Immersion
Moisture Resistance
Altitude Immersion
Insert Retention
Corrosion
Analyses
Service and Storage Life
Gases and Toxic or Corrosive Fumes
TABLE ll
Test or
Environment
Test Level or
Special Requirments
Measured Values
or Comments
Parameters Limits
Examination Of Product
visual Examination
Sample Preparation
Insulation Resistance - 25 C
Withstanding Voltage - Sea Level
Withstanding Voltage - Altitude
Contact Resistance
Assure compliance with:
a) Applicable detail specifications and control drawings
b) Materials
c) Design and construction
d) Dimensional
e) Finish
f ) Product identification
g) Workmanship
Compliance to applicable detail specification and
control drawings.
Product submitted accompanied by Q.A.certifiates of compliance.
complied with the applicable acceptance requirements for qualification
testing.
VISUAL
EXAMINATION
Visual examination of qualification test specimens for completness,
workmanship, identification and /or other detrimental conditions.
Visual examination acceptance.
No visible detection of any condition detrimental to normal function.
SAMPLE
PREPARATION
MIL-W-16878/4A, 28 AWG (min. dia.) and 22 AWG (max. dia.) wire.
Daniels WA22A crimping tool. M22520/2-06 and M22520/2-09 contact
positioner for resp.22D size socket and pin. MS7495A22M insertion and
MS27495R22M removal tool.
Assemblies to conform with specified wiring and
termination requirements.
Qualification test specimens prepared and terminated in accordance
with specified wiring requirements. No difficulties encountered during
wiring operation.
INSULATION RESISTANCE
[25 C (77 F)]
Unmated condition. 50% of contact complement measured. Between adjacent 5.1 Gigohms minimum at 500 Vdc.
contact paris and each contact and connector shell.
Electrification Time 120 secs. maximum.
Insul. res. range (ohms) (25 C) DPKA
Cont./Shell
Adj. Cont.
1.1T-1.8T
300G-1.0T
DPKB
1.1T-20T
400G-1.6T
(Ganged parallel test circuits)
DIELECTRIC
WITHSTANDING
VOLTAGE (SEA LEVEL)
Unmated condition. 50% of contact complement measured. Test voltage 1350 No electrical breakdown, flashover or excessive
Vac/rms-60hz, applied between adjacent contact pairs and each contact and current leakage.Electrification 2 secs.
connector shell.
minimum.
No evidence of breakdown or flashover Leakage <
_.5mA. (Ganged
Parallel test circuits)
SALT SPRAY (CORROSION)
Method 101, test condition B. (48 hours) unmated. Salt soultion 5% by
weight. S.G. 1.026 to 1.040 at 22.8 C-23.9 C (73 F-75 F). Solution pH6.5
to 7.2 and chamber temp 33.9 C to 36.1 C (93 F to 97 F).
Visual examination. No degradation of normal
connector functions.
No detrimental corrosive attack on connector's surface finish or
contacts.
CONTACT RESISTANCE
[AT 25 C AND 200 C
(77 F AND 392 F)]
Mated condition 20% of contact complement tested. Test circuit per Fig. 2
measured across points YY performed at 25 C and 200 C (77 F and 392 F).
Max. Voltage Drop (MV)
Wire
25 C
Size
(77˚F)
28
8
22
14
MV-Drop Range. (25˚C)
Wire
Size
Adc
28
1.5
22
5.0
Contact/
Wire size
22D/28
22D/22
Test Current
Adc
1.5
5.0
200 C
(392˚F)
19
25
Range
(mV)
2.3-5.2
6.3-10
(200 C)
28
22
1.5
5.0
9-17
16-21
100% of socket contact complement measured. Separating force measured
on steel test pin .0294 +
_.0001 (0.747 +
_0.002) dia. insertion depth .205
(5.21) min. from insert face.
Separating Force (ounce-force)
Min.
Max.
0.6
4.9
Separating force range (ounce-force)
DPKA Sep. Force
1.3-4.1
DPKB
1.0-2.9
CONNECTOR MATING AND
UNMATING FORCES
Mating dept, .390 (9.91) panel spacing. Total of 10 cycles mating and
unmatings. Forces measured on 10th cycle.
Axial mating and unmating forces 175
pounds-force maximum.
Mating/Unmating Force (pound-force)
Mate
145
DPKA
150
DPKB
Forces obtained on 10th cycle.
CONTACT RETENTION
Unmated. 50% of contacts measured. 10.0 1bf applied to contact engaging
end. Zero reference at 2.0 1bf preload. Displacement measured under spec.
load.
Max. contact displacement under 10.0 1bf load
.011 (0.28) maximum.
Contact Displacement Range (inch)
DPKA
Pins
0.002-0.003
Sockets
0.002-0.004
DPKB
Pins
0.002-0.004
Sockets
0.002-0.003
CONTACT SEPARATING FORCES
ENDURANCE (DURABILITY)
Mating dept, .450 (11.43) panel spacing. Total of 500 cycles mating and
unmating at a rate of 300 cycles/hour maximum.
Withstand 500 cycles of durability conditioning
without detrimental effects to function.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
Avg.
(mV)
3.8
8.2
H-79
11.8
17.8
Avg. Force
2.4
2.0
No detrimental damage. Connectors fully functional.
Unmated
34
72
Avg.
0.0027
0.0031
0.0027
0.0026
Rack and Panel
Test Description
H
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 80
MIL-C-83733
DPK
Test Data
(TABLE ll Continued)
Test or
Environment
THERMAL SHOCK
Mated condition. Five continuous cycles of temperature change. 30 mins.
exposure at each temp. extreme constitutes one cycle. Transfer time
between chambers 2 mins. max. temp. extremes: - 54 ± 3˚C and 200
± 3˚C (-??˚ +_ 5.4˚F and 392 ± 5.4˚F).
CRIMP POTENTIAL DROP
20% of the contacts in each connector measured. Test circuit per Fig. 2
measured across points X-X and X'-X'.
Contact/Wire-size
22D/28
22D/22
H
Rack and Panel
Test Level or
Special Requirments
Measured Values
or Comments
Parameters Limits
Withstand temperatre cycling. No damage.
No apparent damage.
Max. crimp potential drop:
Wire
Size
28
22
Test Current (Adc)
1.5
5.0
Crimp mV drop range.
DPKA (sockets)
M.V.
2.8
7.0
Adc
1.5
1.5
DPKB (sockets)
Adc
5.0
(Pins)
5.0
DIELECTRIC WITHSTANDING
VOLTAGE (ALTITUDE)
Mated condition. 50% of contact complement measured. Performed
at simulated altitude of 70,000 ft. (33.7 mm Hg pressure) Test voltage 825
Vac/rms-60 Hz, applied between adjacent contact pairs and each contact
and connector shell.
INSULATION RESISTANCE ELEVATED Umnated condition. 50% of contact complement measured. Test points
identical to those measured at 25˚C (77˚F). Oven ambient controlled at
TEMP.[200˚C (392˚F)]
200˚C (392˚F). Stabilization period 30 minutes minimum.
Range
1.7-2.1
Avg.
1.8
1.1-1.6
1.3
Range
1.8-2.4
Avg.
2.1
1.4-1.8
1.5
(Pins)
Same as at sea level conditions.
No evidence of breakdown or flashover. Leakage <
_.5mA. (Ganged
Parallel test circuits)
204 Megohms minimum at 500 Vdc.
Electrification time 120 secs. maximum,
Insul. Res. range (ohms) [200˚C (392˚F)]
DPKA
Adj. Cont.
1.4G-10G
Cont./Shell
2.4G-4.0G
DPKB
0.75G-10G
2.26G-5.0G
(Ganged parallel test circuits)
VIBRATION (RANDOM)
Method 214, Test condition II, Letter 'G'. Test level envelope per figure and
table 214-2. Contact circuit senes wired far current discontinuity monitoring.
Eight hours duration in each of three mutually peipendicuiar axes. Connector
mating depth .450 (11.43) panel spacing.
No current discontinuity >_ 1.0 microsec. No
cracking, breaking or loosening of connector
parts.
Connectors met random vibration requirements. No electrical
discontinuity detected.
PHYSICAL SHOCK
Mated condition, .450 111.43) panel spacing. Shock pulse duration I I ± 1
mS, waveshape terminal peak smooth, peak amplitude 20g. Contact circuit
series wired for current discontinuity monitoring. One shock pulse in each of
three mutually perp. axes.
No current discontinuity >_ 1.0 microsec. No
cracking, breaking or loosening of connector
parts.
Connectors met physical shock requirenments. No electrical
discontinuity or damage detected.
MOISTURE RESISTANCE
Method 106, (Step 7b) ommed) Mated condition. 10 days humidity and
temperature cycling. At end Step 6 final cycle at 25˚C (77˚F) and 90-98%
RH insulation resistance in asured 100% between each and ail other
contacts and the shell in parallel circuit.
Insulation resistance at final humidity cycle 102
Megohms minimum at 50 Vdc.
Insul. Res. range (ohms ) final humidity cycle.
DPKA
DPKB
Mated condition. Immersed in 5% sail solution by weight. Unsealed wire
ends exposed to chamber atmosphere. Simulated test altitude 75,000 ft,
(1.0 inch Hg). 30 mins. at altitude followed by 15 mins. at room ambient,
Repeat for total of 3 cycles. Insul. res. and OWV measured 100% of contact
complement at room ambient and submerged.
Insulation resistance 1.2 Gigohm minimum at 5
Vdc. DWV 1350 Vac/rms - 60 Hz,
electrification time 60 secs. minimum. No
breakdow, flashover or leadage <
_ 2 mA,
Final insul. Res ranges (ohms).
DPKA
1.5T-4.5T
Avg. 1.9T
ALTITUDE IMMERSION
1.66-500G
Avg: 224G
2
1.6-500G
Avg: 190G
DPKB
0.7-3.5T
Avg: 1.3T
DWV - No evidence of insert movement and /or dislocation from
normal position
INSERT RETENTION
Unmated. 46 1bf/in. pressure lead applied to each inert face at 5
2
1bl/in./sec.. maintained for 5 secs. min. at specified load.
No insert disiocation from normal position in the
connector shell.
No evidence of insert movement and/or dislocation from normal
position.
OZONE EXPOSURE
Unimated. Ozone concentration 0.010 to 0.015 percent by volume. Exposure
period 2 hours minimum at room temperature.
No derterioration.
No evidence of ozone effects.
FLUID IMMERSION
Fluid immersion rest fluids and procedures per Table 4:
Sample
Test Fluid
No.
MIL-L-7808
4-1P/R
MIL-L-23699
4-2P/R
M2-V CHEVRON
4-3P/R
MIL-H-5606
4-4P/R
MIL-A-8243
4-5P/R
MIL-C-25769
4-6P/R
MIL-T-5624 (JP-5)
4-7P/R
Coolanol-25
4-8P/R
Regular (Leaded commercial auto-gasoline
4-9P/R
Solvent (a) MIL-STD-202)
4-10P/R
Solvent (b) MIL-STD-202)
4-11P/R
Solvent (c) MIL-STD-202)
4-12P/R
No detrimental damage of effects to connector
performance.
Axial
Mate and unimate forces after fluid immersion
175 1bf max.
Other than evidence of normal light swelling of the connector resilent
seals, the samples did not exhibit any dertirmental affects. Mateability
was not imparied.
GOLD PLATING POROSITY
Unwired. wouisembled contact bodies. One part (by volume) concentrated
Nitric Acid (S.G.-l.42) to we part distilled water. 30 secs. minimum
immersion period.
No visible reaction (bubbles forming) to reagent.
No evidence of reaction to reagent.
TEMPERATURE LIFE W/CONTACT
LOADING
Wired mated condition, with contacts under specific load: #220 (5 lbs.);
#16 12.5 lbs. A current of 100 MA was applied during life of test. Test
duration, 1000 hours at temperature of + 200˚C (392˚F).
Withstand temp life. No damage. No
discontinuity higher than 1.0 microsecond. No
contact dislodging order load.
No evidence of contact dislodging and/or electrical disconinuity of 1.0
miscrosecond or greater during the speified temperature life exposure
under contact loading conditions. All post test requirements were met.
DPKA
4-1P/R
4-2P/R
4-3P/R
4-4P/R
4-5P/R
4-6P/R
Mate
125
125
127
132
132
123
After Fluid Immersion
Mating/Unmating forces
(Pound-Force)
Unmated DPKB
4-7P/R
27
4-8P/R
31
4-9P/R
35
4-10P/R
35
4-11P/R
63
4-12P/R
55
Mate
138
141
137
145
150
148
Unmated
71
57
63.5
76
81
86
Conclusion
All subject test specimens, connector components,
The successful completion of the qualification pro-
qualification requirements in accordance with
materials, accessories and contacts covered by this
gram as reported herein, demonstrates the capa-
MIL-C-83733. On the basis of testing, the DPK
report satisfied and/or exceeded the specified
bilities of the subject ITT Cannon DPK series
connector series was granted full OPl status to
requirement.
connectors to comply with stringent verification
MIL-C-83733.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
H-80
www.ittcannon.com
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 81
MIL-C-83733
DPK
Weights
The following are weights for DPK connector assemblies, mounting hardware, contacts, and sealing plugs.
All connector weights are listed less contacts (FO) and mounting hardware. The total connector weight is
obtained by adding mounting hardware, contacts, and sealing plugs weight to the connector assembly
weight.
Example:
DPKB-101SK-7 (with 90 contacts and 11 sealing plugs)
DPKB-101SG-7-FO
90 Number 20 Socket Contacts
11 Number 20 Sealing Plugs
Weight
Grams
.2332
.0825
.0639
.0020
105.78
37.42
28.98
.88
.3816
173.06
H
Maximum Connector Weight
Maximum Weight
Part Numbet
Lbs.
Grams
(Description)
DPKA-18PG-7-F0
DPKA- 18SG-7-F0
DPKA-32PG-7-F0
DPKA-18SG-7-F0
DPKA-51PG-7-F0
DPKA-51SG-7-F0
DPKA-G131PG-7-F0
DPKA-G131SG-7-F0
DPKB-48PG-7-F0
DPKB-48SG-7-F0
DPKB-59W7PG-7-F0
DPKB-59W7SG-7-F0
DPKB-64PG-7-F0
DPKB-64SG-7-F0
DPKB- 71PG-7-F0
DPKB-71SG-7-F0
DPKB-71C15PG-7-F0
DPKB-71C15SG-7-F0
DPKB-78PG-7-F0
DPKB-78SG-7-F0
DPKB-101PG-7-F0
DPKB-101SG-7-F0
DPKB-G185PG-7-F0
DPKB-G185SG-7-F0
.1474
.1496
.1496
.1518
.1529
.1551
.1045
.1077
.2398
.2486
.2354
.2442
.2354
.2442
.2288
.2332
.2288
.2332
.2266
.2288
.2288
.2332
.1628
.1650
#12 Pin, 030-9185-003
#12 Skt, 030-9186-003
#16 Pin, 030-9205-007
#16 Skt, 030-9206-006
#20 Pin. 030-9173-006
#20 Skt, 031-9174-004
#22D Pin, 030-2042-000
#22D Skt, 031-1147-000
#12 Shielded Pin, 249-1825-001
#12 Shielded Skt, 249-1826-000
#8 Coaxial Pin, 59W7 Layout
#8 Coaxial Skt, 59W7 Layout
Type C Bushing, 012-0515-000 (4 reqd)
Type K Spring Mtg Captive (non-rotate)
Type F Nut (4 reqd)
Type G Spring Mtg 231-0019-000 (4 reqd)
.00298
.00291
.00135
.00146
.00062
.00071
.00021
.00025
.00206
.00258
.00420
.00650
.00606
.08250
.00072
.01180
1.353
1.318
.611
.664
.280
.322
.093
.111
.943
1.168
1.910
2.948
2.750
37.42
.325
5.350
Size 22; 225-1013-000
Size 20; 225-0070-000
Size 16; 225-0071-000
Size 12; 225-0072-000
SEALING PLUGS
.00006
.00018
.00036
.00064
.027
.080
.163
.291
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
H-81
66.86
67.86
67.86
68.86
69.35
70.35
47.40
48.85
108.77
112.76
106.78
110.78
106.78
110.78
103.78
105.78
103.78
105.78
102.78
103.78
103.78
105.78
73.85
74.85
Rack and Panel
Type K Spring Mount
Weight
Pounds
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 82
MIL-C-83733
DPK
Receptacle (Pin Contacts)
BASIC RECEPTACLE SHELL DIMENSIONS
1
1.385 MAX.
(35.16)
L
C
H
Rack and Panel
.562 ± .004
(14.27 ± 0.10)
1.002 ± .008 - .017
(25.42 ± 0.20 - .43)
1.135 MAX.
(28.83)
.890 ± .005
(22.61 ± 0.13)
B
1.158 ± .012
(29.41 ± 0.30
1.000 ± .010
(25.40 ± 0.25)
A
.312 ± .010R 4 PLCS.
(7.92 ± 0.25)
.188 ± .010 R. TYP.
(4.78 ± 0.25)
1
.111 ± .008 - .007
(2.82 ± 0.20 - 0.18
.526 + .008 - .007
(13.36 + 0.20 - 0.18)
JUNCTION SHELL
AND SCREW
1
Junction shell and screws are not supplied on - G131 and -G185 layouts.
SHELL SIZE
DPKA*P**
DPKB*P**
A
B
2.085 (52.96)
2.072 (52.63)
3.385 (85.98)
3.372 (85.65)
1.976 (50.19)
1.961 (49.81)
3.281 (83.34)
3.261 (82.83)
C
2.580 (65.58
2.570 (65.38)
3.880 (98.53)
3.870 (98.32)
L
3.030 (76.96)
3.000 (76.20)
4.330 (109.98)
4.300 (109.22)
N
Staggered †
2.150 (54.61)
2.130 (54.10)
3.450 (87.63)
3.430 (87.12)
†See Page 85 Style M and Z
DPK TYPES
Mounting Style A
Mounting Dimensions for Coupling Nut Assemblies
.197 ± .005 DIA.
(5.00 ± 0.13)
2 HOLES
COUPLING NUT
RECEPTACLE
REF.
.500 MAX.
(12.70)
JAM NUT
PANEL NUT
PLUG
CONNECTOR
REF.
POLARIZING POST
2 REQD.
.532 ± .008
(13.51 ± 0.20)
RECEPTACLE
CONNECTOR
REF.
PANEL
DPK/Mil-C-83733 TYPES
Mounting Style G
Standard Hole Mounting MIL-C-83733/1(USAF)
Mounting Style F Clinch Nut Mounting
MIL-C-83733/6(USAF)
.281 ± .005 DIA.
(7.14 ± 0.13)
4 HOLES
.141 MAX.
(3.58)
.138 (3.50) - 32 CLINCH NUT
(4 PLACES) THREAD
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
H-82
www.ittcannon.com
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 83
MIL-C-83733
DPK
Receptacle/Configurations (Pin Contacts)
DPK/MIL-C-83733 TYPES
Mounting Stye X
With Guide Sockets MIL-C-83733/3(USAF)
Mounting Stye C
Bushing Mounting MIL-C-83733/5(USAF)
.405 ± .010
(10.29 ± 0.25)
ACROSS HEX FLATS
.197 + .003 - .002 DIA.
(5.00 + 0.08 - 0.05)
2 HOLES
.207 ± .002 DIA.
(5.26 ± 0.05)
.477 + .008/ - .007
(12.12 + 0.02/ - 0.18)
1.060 ± .010
(26.92 ± 0.25)
MS24700-2
BUSHING
.281 ± .005 DIA.
(7.14 ± 0.13)
FLANGE
HOLE
.312 (7.92) - 24 UNF-2A
DPK/MIL-C-83733 TYPES
Mounting Stye M
Staggered Standard Hole Mounting MIL-C-83733/9(USAF)
Mounting Stye Y
With Guide Pins MIL-C-83733/8(USAF)
31˚
29˚
.281 ± .005 DIA.
(7.14 ± 0.13)
2 HOLES
N
.200 ± .002
(5.08 ± 0.05)
1.370
(34.80)
MAX.
.190 (4.82 - 32 UNF-2
Mounting Stye H
Staggered Bushing Mounting MIL-C-83733/10(USAF)
Mounting Stye Z
Staggered Clinch Nut Mounting MIL-C-83733/11(USAF)
RECOMMENDED SCREW
.138 (3.50) - 32 UNC-2A FLH
(3/8 LONG) THREAD
.141 (3.58) MAX.
.138 (3.50) - 32 UNC-28 CLINCH NUT
2 PLACES
THREAD
FLANGE
HOLE
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
H-83
Rack and Panel
RECOMMENDED SCREW
.138 (3.50) - 32 UNC-2A (3/8 LONG)
THREAD
.281 ± .005 DIA.
(7.14 ± 0.13)
H
16˚
14˚
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 84
MIL-C-83733
DPK
Plug/Configurations (Socket Contacts)
L
Basic Plug
Shell Dimensions
1.265 MAX.
(32.13)
.030 + .010 - .000R
(0.76 + 0.25 - 0)
4 PLACES
D
A
TYP.
1.010 MAX. (25.65)
.622 + .006 - .007
(15.80 + 0.20 - 0.18)
.780 ± .005
(19.81 ± 0.13)
1.158 ± .012
(29.41 ± 0.30)
.562 ± .004
(14.28 ± 0.10)
Rack and Panel
H
.878 ± .005
(22.56 ± 0.13)
1.002 +.008 - .017
(25.45 +_ 0.20 - 0.43)
C
B
SHELL SIZE
1 Junction shell and hardware are not supplied on -G131 and
-G185 layouts.
† See page 85 Style M and H
DPKA*S**
DPKB*S**
.700 ± .010
(17.78 ± 0.25)
.111 + .008 - .007
(2.82 + 0.20 - 0.18)
.125 ± .010R.
(3.18 ± 0.25)
2 PLACES
.312 ± .010
(7.92 ± 0.25)
4 PLACES
A
B
1.959 (49.76)
1.864 (47.35)
1.853 (47.07)
C
1.780 (45.21)
1.763 (44.78)
3.164 (80.37)
3.153 (80.09)
3.080 (78.23)
3.063 (77.80)
1.946 (49.43)
3.259 (82.78)
3.246 (82.45)
DPK Styles
JUNCTION SHELL
1
D
2.580 (65.53)
2.570 (65.28)
3.880 (96.52)
3.870 (98.30)
L
3.030 (76.96)
N
Staggered †
2.150 (54.61)
3.000 (76.20)
2.130 (54.10)
4.330 (109.98)
4.300 (109.22)
3.450 (87.63)
3.430 (87.12)
Mounting Spacing Dimensions
For Jackscrew Assemblies
Mounting Style A
JACKSCREW
THRUST WASHER
.040 (1.02) DIA.
WIRE HOLE SAFETY
CONNECTOR
RETAINING RING
.196 + .004 - .003 DIA.
(5.03 + 0.10 - 0.06)
2 HOLES
.500 MAX.
(12.70)
305-0007-000
JACKSCREW ASSY
PLUG
CONNECTOR
POLARIZING POST
2 REQD.
.532 ± .008
(13.51 ± 0.20)
RECEPTACLE
CONNECTOR
PANEL (REF.)
DPK/MIL-C-83733 TYPES
Mounting Style K - MIL-C-83733/4(USAF)
With Captive Springs
Mounting Style X - MIL-C-83733/2(USAF)
With Guide Pins and Spring Mounting
.138 (3.50) -32 UNC-2B
THREAD
.138 (3.50) - 32 UNC-2A
THREAD
31˚
29˚
.116 ± .080
(2.94 ± 2.03)
.200 ± .002 DIA.
(5.08 ± 0.05)
1.250 (31.75)MAX.
SPRING IN FREE
POSTION
1.370
(34.80)
MAX.
.190 (4.82) -24 UNC-2A
THREAD
.390 MAX.
(9.91)
.116 ± .080 DIA.
(2.94 ± 2.03)
.190 (4.82) -32 UNF-2
NOTES: 1. Springs are pre-loaded to 25 pounds each in free position.
2. Spring forces will be 118 pounds minimum at .500 (12.70) panel spacing and 176
pounds maximum at .390 (9.91) panel spacing
NOTES: 1. Springs are pre-loaded to 25 pounds each in free position.
2. Spring forces will be 59 pounds minimum at .500 (12.70) panel spacing and 88
pounds maximum at .390 (9.91) panel spacing
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
H-84
www.ittcannon.com
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 85
MIL-C-83733
DPK
Plug/Configurations (Socket Contacts)
DPK/MIL-C-83733 TYPES
Mounting Style Y - MIL-C-83733/7(USAF)
With Guide Sockets and Spring Mounting
Mounting Style H - MIL-C-83733/12(USAF)
Staggered Spring Mounting
N
.405 ± .010
(10.28 ± 0.25)
ACROSS HEX FLATS
H
.138 (3.50)-32 UNC-2B THREAD
.138 (3.50)-32 UNC-2B THREAD
*See page 82
.116 ± .080
(2.94 ± 2.03)
.207 ± .002 DIA.
(5.26 ± .005)
.485 MAX
(12.32)
.116 ± .080
(2.94 ± 2.03)
1.250 (31.75) MAX.
SPRING IN FREE
POSITION
1.250 (31.75) MAX.
SPRING IN FREE
POSITION
.312 (7.92) - 24 UNF-2A
THREAD
NOTES: 1. Springs are pre-loaded to 25 pounds each in free position.
2. Spring forces will be 59 pounds minimum at .500 (12.70) panel spacing and 88
pounds maximum at .390 (9.91) panel spacing
NOTES: 1. Springs are pre-loaded to 25 pounds each in free position.
2. Spring forces will be 59 pounds minimum at .500 (12.70) panel spacing and 88
pounds maximum at .390 (9.91) panel spacing
3. This configuration must not be used on teh 131 or 185 contact layouts.
DPK Commercial Types
Mounting Style G
Standard Hole Mounting
Mounting Style F
Clinch Nut Mounting
.281 ± .005 DIA.
(7.14 ± 0.12)
4 HOLES
Mounting Syle M
Mounting
N*
See page 82
.141 (3.58)
MAX.
.138 (3.50)-32 UNC-2B THREAD
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
H-85
.281 ± .005 DIA.
(7.14 ± 0.12)
4 HOLES
Rack and Panel
16
14
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 86
MIL-C-83733
DPK
Mounting Styles/Applications
DPK connectors for rectangular or staggered
mounting are available in both two- and four-spring
mount assemblies, or the same shelf style may be o
rdered to accommodate bushing assemblies. In the
spring mount version the spring-loaded mechanism
will compensate for a panel space variation of up to
.070(1.78) while insuring electrical and environmental integrity.
DPK connectors are also available with polarizing
posts, accommodations for jackscrews, and coupling nuts for cord-to-card and cord-to-panel applications. Another shelf style has two or four mounting holes fitted with captive clinch nuts.
For mounting dimensions of the various mounting
styles shown here please refer to page 91.
H
Rack and Panel
Ordered Separately
Style A
Mounting style A is designed for cord-to-panel and c
ord-to-cord applications. Connectors are supplied
with two polarizing posts installed and provisions
for installation of two jackscrew assemblies or two
coupling nut assemblies. (Replaces Mounting Style
B.)
Receptacle
Pin Contacts
Plug
Socket Contacts
M83733/5
Jackscrew Assembly
305-0007-000
Coupling Nut Assembly
335-0002-000
Supplied with Connector
Stylle C
Mounting style C is designed for cord-to-panel or
rack-to-panel applications. Connectors are supplied
with (4) MS24700-2 bushings on the receptacle
and 4 spring mount assemblies on the plug.
Bushing MS247000-2
(Self-Locking)
012-0515-000
Receptacle
Pin Contacts
Spring Mount Assembly
MIL-C-83733/17
231-00019-000
M83733/6
Style F
Mounting Style F is designed for rack-to-panel
pplications. Connectors are supplied with four
captive clinch nuts installed.
Receptacle
Pin Contacts
M83733/1
Style G
Mounting style G is designed for rack-to-panel
applications. Connectors are supplied with four
.281(7.14) diameter holes which will accommodate
either four MS24700-2 bushings or four 231-0019000 spring mounts,
Style H
Mounting style H is designed for rack-to-panel
applications. Connectors are supplied with two
.281(7.14) diameter holes which are staggered.
Two spring mounts are on the plug end two
MS24700-2 bushings are on the receptacle.
Style K
Mounting style K is designed for rack-to-panel a
pplications. Connectors are supplied with four c
aptivated, non-rotating spring mounts on the plug.
Receptacle
Pin Contacts
Plug
Socket Contacts
M83733-12
M83733-10
Receptacle
Pin Contacts
Plug
Socket Contacts
Ordered Separately
Bushing MS24700-2
(Self-Locking)
012-0515-000
Spring Mount Assembly
MIL-C-83733/17
231-0019-000
Supplied with Connector
Bushing MS247000-2
(Self-Locking)
012-0515-000
Spring Mount Assembly
MIL-C-83733/17
231-0019-000
M83733/4
Plug
Socket Contacts
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
H-86
www.ittcannon.com
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 87
MIL-C-83733
DPK
Style M
Mounting style M is designed for rack-to-panel
applications. Connectors are supplied with two .281
(7,14) diameter holes which are staggered and will
accommodate eight two MS24700-2 bushings or
two 231-0019-000 spring mounts.
Receptacle
Pin Contacts
Plug
Socket Contacts
M83733/2
Ordered Separately
Bushing MS24700-2
(Self-Locking)
012-0515-000
Spring Mount Assembly
MIL-C-83733/17
231-00019-000
M83733/3
H
Receptacle
Pin Contacts
Plug
Socket Contacts
Guide Pin Kit
320-1070-000
Guide Socket Kit
320-1069-000
Supplied with Connector
Style Y
Mounting style Y is identical to mounting style X,
except the guide sockets are on the plug and the
guide pin and springs are on the receptacle.
M83733/7
M83733/8
Receptacle
Pin Contacts
Plug
Socket Contacts
Guide Socket Kit
320-1069-000
Guide Pin Kit
320-1070-000
M83733/11
Style Z
Mounting style Z is designed for use in rack-topanel applications. Connectors are supplied with
two captive clinch nuts which are staggered.
Receptacle
Pin Contacts
MIL-C-83733
Connector Type
Mating MIL-C-83733
Connector
DPK Mtg.
Style
M83733/1 RECEPTACLE
G
M83733/4
K
M83733/2 PLUG
X
M83733/3
X
M83733/3 RECEPTACLE
X
M83733/2
X
M83733/1
G
M83733/5
C
M83733/6
F
M83733/4 PLUG
K
M83733/5 RECEPTACLE
C
M83733/4
K
M83733/6 RECEPTACLE
F
M83733/4
K
M83733-07 PLUG
Y
M83733/8
Y
M83733-08 RECEPTACLE
Y
M83733/7
Y
M83733-09 RECEPTACLE*
M
M83733/12
H
M83733-10 RECEPTACLE*
H
M83733/12
H
M83733-11 RECEPTACLE*
Z
M83733/12
H
M83733/9
M
M83733/10
H
M83733/11
Z
M83733-12 RECEPTACLE
*Not recommended for G131 and G185 layouts.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
DPK Mtg.
Style
H-87
H
Rack and Panel
Style X
Mounting style X is designed for rack-to-panel
applications where positive alignment is required
before connectors are mated. Plug has two guide
pins and two spring mounts (MIL-STO-1533); receptacle has two guide sockets and two .197 (5.00)
dia. holes.
M83733/9
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 88
MIL-C-83733
DPK
Polarization (Mounting Style A only)
Polarizing Post Alternate Positions
Rack and Panel
H
Pin inserts polarizing postitions are 180 opposite
socket insert polarizing positions. Shaded areas
indicate extended portion of the polarizing post.
Cord to panel DPK connectors are available in 35
alternate polarizing positions by changing indexing
of the polarizing posts. Keystone corners and hexagonal posts provide this wide range of alternate
positions.
Face view of socket insert plug connector engaging
end.
N
V
W
X
Y
Z
Contact Data
Standard Contacts
Contact
Size
Type
12
Pin
Skt.
16
Pin
Skt.
20
Pin
Skt.
22
Pin
Skt.
Pin
Skt.
22D
Cannon
Part Number
MIL-C-39029
Military
Part Number
030-9185-003
M39029/4-113
031-9186-003
M39029/5-118
030-9205-007
M39029/4-111
031-9206-006
M39029/5-116
030-9173-006
M39029/4-110
031-9174-004
M39029/5-115
030 -1975-008
M39039/11-144
031-1113-008
M39029/12-148
030-2042-000
M39029/58-360
031-1147-000
M39029/57-354
Crimp
Tool
M22520/1-01
with
M22520/1-02
Turret
M22520/2-01
with
M22520/2-02
Turret
M22520/2-01
with
M22520/2-23
Turret
M22520/2-01
with
M22520/2-06
(Socket)
Turret
M22520/2-09
(Pin)
Turret
Grommet
Sealing Plug
Part Number
(Color)
Insertion/
Extraction
Tool
MIL-I-81969/14-04
225-0072-000
(Yellow)
MIL-I-81969/14-03
225-0071-000
(Blue)
MIL-I-81969/14-11
225-0070-000
(Red)
MIL-I-81969/14-01
225-1013-000
(Black)
MIL-I-81969/14-01
Coaxial/Shielded Contacts
Coaxial
Coaxial
Contacts*
1
59W7
Arrangement
Only
Type
Plug
Receptacle
Plug
Receptacle
Prefix
G
G
F
F
Cannon
Part Number
249-5500-012
Cable
Accom.
DWV
Voltage
RG-316
500 VDC
249-5500-013
249-5500-010
Min./Max.
O.D. Wire
Accom.
.122 (3.10)
.250 (6.35)
500 VDC
RG-180/U
.122/250
249-5500-011
Crimp
Tool
Ins./
Ext.
Tool
CCTC8 Outer
M22520/2-01
M22520/2-30
CET-C8
CCTC9 Outer
M22520/2-01
M22520/2-30
CET-C8
Grommet
Sealing Plug
Part Number
(Color)
225-0085-00
(White)
*Plug coaxials go into plug connectors (59W7S inserts with socket contacts). Receptacle coaxials go into receptacle connectors ("P" inserts) with pin contacts (59W7P inserts with pin contacts).
Coaxial
Size 12
Contact
71C15
Layout
Only
Type
Cannon
Part Number
MIL-C-39029
Part Number
Pin
249-1825-001
M39029/50-340
Socket
249-1826-000
M39029/51-341
Cable
Accom.
Min./Max
Cable Dia.
.081 (2.06)
RG-179U
.158 (4.01)
Crimp
Tool
Locator
.M22520/5-01
Outer
M22520/2-01
Inner
.M22520/5-08
Outer
M22520/2-30
Inner
Ins./
Ext.
Tool
CIET - 12
Grommet
Sealing Plug
Part Number
(Color)
225-0072-000
(Yellow)
*Pin shielded contacts utilized in receptacle connectors (71C15P inserts).
Socket shielded contacts utilized in plug connectors (71C15S inserts).
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
H-88
www.ittcannon.com
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 89
MIL-C-83733
DPK
Contact Arrangements
DPKA
Face View Pin Insert Shown
9
1
26
5
11
4
3
10
2
9
8
7
15
6
14
24
18
17
16
Layout
No. of Contacts
and Wire Size
Service Rating
15
14
6
7
1
13
12
23
32
5
13
22
31
4
12
11
21
30
3
9
27
17
16
26
8
7
6
5
4
3
2
1
25
18
36
27
47
19 18 17 16 15 14 13 12 11 10
30 29 28 27 26 25 24 23 22 21 20
8
19 18
28
9
1
10
20
29
2
37
68
58
89
40 39 38 37 36 35 34 33 32 31
79
110
51 50 49 48 47 46 45 44 43 42 41
100
131
121
18
18 #12
32
32 #16
51
51 #20
G131
131 #220
l
l
l
M
H
10
11
24
25
38
23
36
37
47
48
8
9
6
7
5
4
46
14
15
35
45
20
21
34
44
19
33
18
29
30
31
13
28
42
43
27
41
15 14
31
48
30
47
64
12
13
29
46
63 62
28
45
11
42
60 59
8
24
25
43
44
61
9
10
27 26
7
41 40
58
Layout
No. of Contacts
and Wire Size
Service Rating
21
38
39
57 56
5
6
22
23
55
G
26
40
37
3
19
36
54 53
14 13 12 11
24 23 22 21 20
9
10
71 70 69 68 67 66 65
8
64
5
6
32
62
63
6
5
4
21
29
47 46 45 44 43 42
3
2
17
35 34
52
41 40 39 38 37 36
53 52 51 50 49 48
32
33
51 50
49
9
10
24 23 22 21 20
16
8
35
28
27
41 40
39 38 37 36
A
26
35 34 33 32
4 3 2 1
19 18 17 16 15
5
6
7
32
33
34
64
71 70 69 68 67 66 65
31
61
17 16 15 14
35 34 33 32
4 3 2 1
19 18 17 16 15
30 29 28 27 26 25
47 46 45 44 43 42
60 59 58
54 53 52 51
70 69 68
57 56 55 54
62
63
30 29 28 27 26 25
31
47 46 45 44 43 42
60 59 58 57 56 55 54
61
78 77 76 75
19 18 17 16 15 14 13 12 11 10 9
8
7
6
5
4
12
13
48
49
50
67
11
29
30
31
66
65
9
10
46
47
64
45
63
7
8
26
27
28
25
44
62
6
43
42
61 60
4
5
22
23
24
41 40
59
58
3 2 1
21 20 19 18
39 38 37 36
57 56 55
74 73 72 71
78
38 #20 (1-4,14-21,32-39,51-57,
68-78),40 #16 (5-13, 22-31,
40-50,58-67
l
3
2
20
25
1
39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20
60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40
15
1
5
10
26
52
51
78
106
79
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61
101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
27
54
154
149
161*
161 #22
l
1000 VDC
13
1
14
41
55
98
84
127
113
142
171
156
185
G185
185 #22D
M
*P0S-ALINE DESIGN
In the 161 contact arrangement, the entire pin contact is recessed in and individual cavity in
the plug connector. The socket contact is exposed and extends from the connector receptacle
face. (Pin insulator accepts socket contacts.)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
159
101
101 #20
69
Layout
No. of Contacts
and Wire Size
Service Rating
107
133
161
Layout
No. of Contacts
and Wire Size
Service Rating
1
20
B
14 13 12 11
1
2
18
71C15
56 #20 (1-4,11-30,36-60,65-71)
15 Shielded #12 (5-10, 31-35,61-64)
#20: 1500: #12 Shielded: 500
1&500 VDC (Coax)
Layout
No. of Contacts
and Wire Size
Service Rating
7
C
71
56#20 (1-4,11-30,36-60,65-71)
15 #12 (5-10,31-56,61-64)
l
7
33
34
35
8
22
D
30
52 51 50 49 48
64
64 #16
l
41 40 39 38 37 36
53 52 51 50 49 48
23
E
59W7
52 #20 (1-52)
7 Coax. (A-G)
#20: 1500 Coax: 1000
l & 500 VDC (Coax)
The 59W7 Layout is sold less coaxial contacts, see page 86 for contact part numbe
4
20
14 13 12 11 10 9
24
F
31
39
48
30 #16 (1,2,10-15,22-29,35-48),
18#12 (3-9,16-21,30-34)
Layout
No. of Contacts
and Wire Size
Service Rating
25
12
16
17
32
19 18 17 16 15
1
2
3
22
H-89
144
139
134
Rack and Panel
DPKB
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 90
MIL-C-83733
DPK
Panel Cutout Dimensions
Figure 1.
Mounting Styles
PG, SG
PC, PF, SF,
SX, PX, SK
SY,PY
S*A, S*B
P*A, P*B
A
E
D
1
E
2
B
.562 ± .004
(14.28 ± 0.10)
H
E
Rack and Panel
E
2
.060 ± .010 RAD.
(1.57 ± 0.25) TYP.
4 PLACES
1
Figure 2.
Mounting Styles
SH, SM
.109 MIN.
(2.77)
A
.562 ± .004
(14.28 ± 0.10)
1.095 ± .005
(27.81 ± 0.13)
.060 ± .010 RAD.
(1.57 ± 0.25) TYP.
4 PLACES
B
.146 ± .002 (3.71 ± 0.05) DIA
THRU C'SUNK
100 ± 1 To .280 ± .005 (7.11 ± 0.13) DIA
2 PLACES
Figure 3.
Mounting Styles
PM, PH, PZ
A
.109 (2.77) MIN.
.562 ± .004
(14.28 ± 0.10)
1.095 ± .005
(27.81 ± 0.13)
DPK
Mounting
Styles
MIL-C-83733
Part No./
Mounting Style
Figure
Ref.
A
± .004(± 0.10)
B
± .005(± 0.13)
.060 ± .010 RAD.
(1.57 ± 0.25) TYP.
4 PLACES
B
.146 ± .002 (3.71 ± 0.05) DIA
THRU C'SUNK
100 ± 1 To .280 ± .005 (7.11 ± 0.13) DIA
2 PLACES
D
± .005(± 0.13)
Shell
Size A
Shell
Size B
Shell
Size A
Shell
Size B
Shell
Size A
Shell
Size B
E1
Shell
Size A
E2
Shell
Size B
Shell
Size A
Shell
Size B
M83733/1/5/6
PG, SG,
PC, PF,SF
1
2.578
(65.48)
3.875
(98.43)
2.103
(51.13)
3.400
(86.36)
1.022
(25.96)
1.022
(25.96)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
M83733/2
SX
1
2.578
(65.48)
3.875
(98.43)
2.103
(51.13)
3.465
(88.01)
1.022
(25.96)
1.095
(27.81)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
.430 (10.92)
.420 (10.67)
.430 (10.92)
.420 (10.67)
M83733/3
PX
1
2.578
(65.48)
3.875
(98.43)
2.103
(51.13)
3.465
(88.01)
1.022
(25.96)
1.095
(27.81)
.320 (8.13)
.315 (8.00)
.320 (8.13)
.315 (8.00)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
M83733/4
SK
1
2.578
(65.48)
3.875
(98.43)
2.167
(55.04)
3.465
(88.01)
1.095
(27.81)
1.095
(27.81)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
M8733/7
SY
1
2.578
(65.48)
3.875
(98.43)
2.167
(55.04)
3.465
(88.01)
1.095
(27.81)
1.095
(27.81)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
.430 (10.92)
.420 (10.67)
.430 (10.92)
.420 (10.67)
M83733/8
PY
1
2.578
(65.48)
3.875
(98.43)
2.167
(55.04)
3.465
(88.01)
1.095
(27.81)
1.095
(27.81)
.430 (10.92)
.420 (10.67)
.430 (10.92)
.420 (10.67)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
2.167
(55.04)
3.465
(88.01)
1.095
(27.81)
1.022
(25.96)
-
-
2
3.875
(98.43)
-
PM, PH
PZ
2.578
(65.48)
-
M83733/9/10/11
2.095
(53.21)
3.400
(86.36)
1.095
(27.81)
1.095
(27.81)
-
-
3
3.875
(98.43)
-
SH, SM
2.578
(65.48)
-
M83733/12
N/A
S*A, S*B,
P*A, P*B
1
2.578
(65.48)
3.875
(98.43)
2.103
(51.13)
3.465
(88.01)
1.022
(25.96)
1.095
(27.81)
.301 (7.65)
.294 (7.45)
.301 (7.65)
.294 (7.45)
.301 (7.65)
.294 (7.45)
.301 (7.65)
.294 (7.45)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
H-90
www.ittcannon.com
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 91
MIL-C-83733
DPK
Mounting Assembly-Jackscrew/Coupling Nut
Installatoin of jackscrew and coupling nuts in mounting style A and B.
CORD-TO-CORD INSTALLATION
PANEL MOUNTING
SHELL (REF.)
NUT, COUPLING
NUT, JAM
.532 +_ .008
(13.51 +
_ .020)
WASHER, THRUST
COUPLING
SCREW
SHELL (REF.)
.040 (1.02) DIA. SAFETY
WIRE HOLE
SHELL
(REF.)
SHELL (REF.)
NUT, PANEL MTG.
RING, TRUARC RET.
MOUNTING
PANELS (REF.)
MOUNTING PANEL POSITIONS
WHEN ENGAGED
Rack and Panel
Mounting Assembly-Bushing/Spring Mount
Installatoin of mounting styles utilizing bushing and spring mount assemblies.
PLUGS
BUSHING MOUNTING FIXED
MS27400-2 MAY BE USED FOR MOUNTING
BUSHING IS SELF-LOCKING
RECOMMENDED SCREW #6-32UNC-2A
(3/8 LONG)
SPRING, FLOAT MOUNTING ASSEMBLY
MAY BE USED FOR MOUNTING
MIL-C-83733/17
.111 +_ .008 - .007
(2.82 +
_ .020 - 0.18)
RECOMMENDED
PANEL SPACING
TO INSURE
ENGAGEMENT
.445 +_ .055
(11.30 +
_ 1.40)
PANEL REF.
RECOMMENDED SCREW
#6-32UNC-2A (3/8 LONG)
WITH TEFLON PELLET
(SELF-LOCKING)
FLANGE OF MATING RECEPTACLE
WHEN FULLY ENGAGED
RECEPTACLES
POSITION OF
SPRING ASSY.
WHEN CONNECTORS
ARE MATED
RACK
(REF.)
.445 +_ .055
(11.30 +
_ 1.40)
RECOMMENDED PANEL SPACING TO
INSURE FULL ENGAGEMENT
RECOMMENEDED SCREW
#6-32UNCA-2A (3/8 LONG)
WITH TEFLON PELLET
(SELF - LOCKING)
PANEL (REF.)
BUSHING MOUNTING FIXED MS24700-2
MAY BE USED FOR MOUNTING
BUSING IS SELF-LOCKING
.281 +_ .005
(7.14 +
_ 0.13)
DIA.
SPRING FLOAT MOUNTING ASSEMBLY MAY BE
USED FOR MOUNTING
RECOMMENEDED SCREW
#6-32UNCA-2A (3/8 LONG)
Mating Forces
The axial forces required to fully mate or separated the plug and receptacle shall not exceed the values listed.
Mating force at .390 (9.91) minimum spacing
Shell
Size
Without mounting
accessories
A
B
70 max.
95 max.
Spring mounting
Maximum
Normal
176
176
145
150
For connectors using spring mounting, the mating forces become a function of the spring loading. Values listed apply to connectors mounted as specified above at
minimum panel spacing.
Dust Covers
PLASTIC TYPE
Series
DPKA
DPKB
Style
Standard
www.ittcannon.com
Conductive
Receptacle
DPKA-60
025-0773-000
025-0773-001
Plug
DPKA-59
025-0772-000
025-0772-001
Receptacle
DKPB-60
025-0774-000
025-0774-001
Plug
DPKB-59
025-0758-000
025-1195-000
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
H-91
H
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 92
MIL-C-83733
DPK
Assembly/Shielded Contacts
Socket
249-1826-000/MIL-C-39029/51
Size 12/RG-179B/U Cable (used in 71C15 layout
BODY
FERRULE
INSULATOR
.122 MIN. DIA.
(3.10)
.148 ± .002 DIA.
(3.75 ± 0.05)
H
Rack and Panel
INNER SKT CONTACT
.187 ± .002 DIA.
(4.74 ± 0.05)
.160 ± .001
(4.06 ± 0.02)
.046 ± .002
(1.16 ± 0.50)
.084 ± .MIN. DIA.
(2.13)
.495 ± .005
(12.57 ± 0.13)
.756 MAX.
(19.20)
Pin
249-1826-000/MIL-C-39029/50
Size 12/RG-179B/U Cable (used in 71C15 layout
FERRULE
BODY
INSULATOR
.084 MIN. DIA.
(2.13)
.151 MAX. DIA.
(3.84)
INNER PIN CONTACT
.187 ± .002 DIA.
(4.74 ± 0.05)
.148 ± .002 DIA.
(3.75 ± 0.05)
.122 MIN. DIA.
(3.10)
.046 ± .002
(1.16 ± 0.05)
.118 ± .003
(3.00 ± 0.08)
.094 ± .001
(2.38 ± 0.02)
.616 ± .005
(15.64 ± 0.13)
.880 MAX.
(22.35)
Assembly Instructions
.510 ± .010
(12.95 ± 0.25)
.340 ± .010
(8.64 ± 0.25)
FERRULE
DIELECTRIC
.070 ± .010
(1.78 ± 0.25)
OUTER CONDUCTOR SHALL
NOT EXCEED THIS EDGE
Step 1.
Step 2.
Step 3.
Strip outer jacket to dimensions shown to expose outer conductor.
Slip (or install) ferrule over outer conductor against cable jacket.
Exposed portion of the outer conductor must be combed out then
folded back over ferrule.
Trim cable to dimensions, as shown. (Ferrule must butt against
cable jacket).
.403 REF.
(10.24)
INNER
CONTACT
Step 4.
Step 5.
Install inner contact against dielectric then crimp contact and center Insert cable,ferrule and inner contact to rear of shell and crimp
conductor with a M22520/2-01 cimp tool using a M22520/2-30
into place with M22520/5-03 crimp tool.
locator.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
H-92
www.ittcannon.com
ca_H1-H116:Layout 1
2/10/11
8:23 AM
Page 93
MIL-C-83733
DPK
Coaxial Contact/Assembly
249-5500-010 Socket*
249-5500-011 PIN*
BODY ASSEMBLY
INSULATOR, BEAD
CONTACT, PIN
BODY INSERT
RING, OUTER
NOTES: 1. These assembly instructions apply to 249-5500-010,
and 249-5500-011.
2. The following assembly tools are required:
a) CCT-C9 hex crimp tool
b) MS3198-Q W/L-3198-C1 contact crimp tool and
locator
c) 149 C(300 F) hot air gun (recommended): Regal
heat Gun No. 9A)
d) Blades, scissors, and picks
COAXIAL CABLE
RG-180/U OR RG-195/U
BODY ASSEMBLY
STEP 1.
STEP 5.
Slide outer ring over cable as shown (Figure 1).
Slide body assembly over componenets and under shield until firmly
13/64 +_ 1/64
(5.16 +_ 0.40)
bottomed in place. Locate outer ring over shield and against body as
STEP 2.
shown (Figure 3).
Strip cable as shown (Figure 1).
3/16 +_ 1/64
(4.76 +_ 0.40)
STEP 6.
STEP 3.
With cable and body assembly securely held together, hex crimp the
Install body insert, insulatro bed, and contact on cable as shown
outer ring with tool CCT-C9 (Figure 3). Important: For optimum hex
(Figure 2.)
crimp, firmly bottom the outer ring against the shoulder of the hex die
STEP 4.
before compressing the handles.
5/16 +_ 1/64
(7.94 +_ 0.40)
8 INDENT CRIMP
With body insert, insulator bead, and contact firmly in place, crimp the
CONTACT, PIN
OR SOCKET
BODY INSERT
contact with tool M22520/2-01 (setting number 3) and loacator
M22520/2-30 (Figure 2). Caution: The assembled componenets must
INSULATOR, BEAD
be tightly in place after crimping.
CENTER CONDUCTOR
MUST BE VISIBLE
IN INSEPECTION HOLE
RING, OUTER
HEX CRIMP
*These contacts are used in the F59C7 layout.
BODY ASSEMBLY
249-5500-012 Socket*
249-5500-013 PIN*
INSULATOR, BEAD
BODY INSERT
RING, OUTER
BODY ASSEMBLY
CONTACT, PIN
SLEEVE
HEAT SHRINK
NOTES: 1. These assembly instructions apply to 249-5500-010,
and 249-5500-011.
2. The following assembly tools are required:
a) CCT-C9 hex crimp tool
b) M22520/2-01 contact crimp tool and locator
c) 149 C(300 F) hot air gun (recommended): Regal
heat Gun No. 9A)
d) Blades, scissors, and picks
COAXIAL CABLE
RG-188/U
CONTACT, SOCKET
BODY ASSEMBLY
STEP 1.
STEP 5.
Slide heat-shrink sleeve and outer ring over cable as shown.
Slide body assembly over componenets and under shield until firmly
13/64 +_ 1/64
(5.16 +_ 0.40)
bottomed in place. Locate outer ring over shield and against body as
STEP 2.
shown (Figure 3).
1/8 +_ 1/64
(3.18 +_ 0.40)
Strip cable as shown (Figure 1). Caution: Do not nick shield wires.
STEP 3.
Install body insert, insulator bead, and contact on cable as shown.
STEP 4.
With body insert, insulator bead, and contact firmly in place, crimp the
contact with tool M22520/2-01, using setting number 3 and loacator
M22520/2-30 (Figure 2). Caution: The assembled componenets must
be tightly in place after crimping.
STEP 6.
With cable and body assembly securely held together, hex crimp the
3/8 +_ 1/64
(9.52 +_ 0.40)
outer ring with tool CCT-C9 (Figure 3). Important: For optimum hex
crimp, firmly bottom the outer ring against the shoulder of the hex die
before compressing the handles.
BODY INSERT
STEP 7.
8 INDENT CRIMP
CONTACT, PIN
OR SOCKET
The final step is to shrink the heat sleeve in place with a hot air source
of 149 C to 327 C (300 F to 621 F) (Figure 3).
CENTER CONDUCTOR
MUST BE VISIBLE
IN INSEPECTION HOLE
INSULATOR, BEAD
HEX CRIMP
RING, OUTER
SLEEVE,
HEAT SHRINK
*These contacts are used in the G59C7 layout.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
H-93
BODY ASSEMBLY
Rack and Panel
CONTACT, SOCKET
H