BKA CONNECTOR SERIES CONNECTOR SERIES BKA Rack & Panel Connector per ARINC 600 Requirements (Standard shell finish: Alodine 1200) NOTE: AN "R" AFTER THE CONNECTOR SERIES WOULD MEAN SUPPLIED WITH RoHS COMPLIANT FINISH CLASS C D E F X SEMI-ENVIRONMENTAL Connector contains removable inserts with sealing grommets. Inserts accommodaterear release-rear removable crimp contacts. Plug connector shells are supplied without peripheral o-ring seals. NON-ENVIRONMENTAL Connector contains removable inserts without sealing grommets. Inserts accommodate rear release-rear removable crimp contacts. ENVIRONMENTAL Connector contains non-removable inserts with sealing grommets, bonded in the shell. Inserts accommodate rear release-rear removable crimp contacts. Plug connector shells are supplied with peripheral o-ring seals. FRONT RELEASE; NON-ENVIRONMENTAL (RECEPTACLE CONNECTORS ONLY) Connector contains removable inserts without sealing grommets. Insert arrangements with size 22 contact cavities, e.g. 100, 150, 121, 59, accommodate front release-front removable solder post or wrap post contacts. Insert arrangements without size 22 contact cavities, e.g. 5W2, 13W2, 34, accommodate rear release-rear removable crimp contacts. FRONT RELEASE; NON-ENVIRONMENTAL (RECEPTACLE CONNECTORS ONLY) Connector contains removable inserts without sealing grommets. All inserts in the connectoraccommodate front release-front removable solder post or wrap post contacts. SHELL SIZE Size 1 Accommodates Maximum 160 Size 22 Contacts Size 2 Accommodates Maximum 400 Size 22 Contacts Size 3 Accommodates Maximum 800 Size 22 Contacts INSERT ARRANGEMENT CODE See INSERT ARRANGEMENT CODES or consult factory when new INSERT ARRANGEMENT CODE is required SHELL STYLE 3 Plug 4 Receptacle (Mounts on the Rack) (Mounts on the LRU) CONNECTOR MOUNTING MODIFIER Talking Dog_BKA.xls 1 of 3 BKA CONNECTOR SERIES 00 PLUG AND RECEPTACLE CONNECTORS .148 dia. connector mounting holes. This is a Standard Configuration. 01 PLUG AND RECEPTACLE CONNECTORS With #6 (.138) - 32 ESNA clinch nuts (See Table for quantities) 02 SIZE 1 RECEPTACLE CONNECTORS ONLY Standard Configurationwith three PWB mounting lugs machined off. 03 PLUG AND RECEPTACLE CONNECTORS With #4 (.112) - 40 ESNA clinch nuts (See Table for quantities) 08 SIZE 2 AND 3 PLUG AND RECEPTACLE CONNECTORS ONLY With #4 (.112) - 40 ESNA clinch nuts in all connector mounting holes (See Table for quantities) 09 SIZE 2 AND 3 PLUG AND RECEPTACLE CONNECTORS ONLY With #6 (.138) - 32 ESNA clinch nuts in all connector mounting holes (See Table for quantities) 12 SIZE 2 PLUG AND RECEPTACLE CONNECTORS ONLY With six #4 (.112) clinch nuts (PEM #KFS2-440) 17 RECEPTACLE CONNECTORS ONLY Standard Configurationwith .0008-.0012 thick nickel plated shells. Metallic inserts, if supplied, are also nickel plated. 22 PLUG CONNECTORS ONLY Standard Configurationwith .0008-.0012 thick nickel plated shell. The shell is provided with an EMI/Grounding spring. Metallic inserts, if supplied, are selectively plated - I.D. Silver; O.D. Nickel over Silver. The contact retaining/grounding clips are gold plated. 23 PLUG AND RECEPTACLE CONNECTORS With floating eyelets (.048 min. radial float) in four corner connector mounting holes. 24 PLUG CONNECTORS ONLY With #4 (.112) - 40 ESNA clinch nuts (See Table for quantities) and with .0008-.0012 thick nickel plated shells, but without EMI/Grounding springs. 25 RECEPTACLE CONNECTORS ONLY 01 mod with #6 (.138) - 32 ESNA clinch nuts (See Table for quantities) and .0008-.0012 thick nickel plated shell. 33 PLUG CONNECTORS ONLY Standard Configurationwith .0008-.0012 thick nickel plated shells, but without EMI/Grounding springs. 34 PLUG CONNECTORS ONLY Standard Configurationwith .0008-.0012 thick nickel plated shells, but without EMI/Grounding springs and #6-32 clinch nuts installed as in mod code -01. Note: Contact factory if other mounting modifiers are required Mounting Modifier 01, 03, 24, 25, 34 08, 09 Shell Size 1 2 3 1 2 3 Quantity of Clinch Nuts Plug Receptacle 4 4 4 6 8 10 4 4 8 10 12 14 POLARIZING POSITIONS Blank Polarizing hardware is supplied with the connector, but is not installed. 00 Polarizing hardware is not supplied with the connector 01-216 Polarizing hardware is installed in positions per ARINC 600 SPECIAL MODIFIER Blank Connector is supplied with full complement of power and signal crimp contacts. Coax, Quadrax, Triax, or Twinax contacts are not supplied. Connector is supplied without contacts F0 ( is not marked on the connector) F0 Connector is supplied without contacts and without waveguideF00 ( is not marked on the connector) F00 S* RECEPTACLE CONNECTORS ONLY Connector is supplied with full complement of signal (size 22) and power contacts per ARINC 600. Coax, Quadrax, Triax, or Twinax contacts are not supplied. BKAF - Signal contacts (size 22) are front release, front removable with solder post termination Power contacts are rear release, rear removable with crimp termination BKAX - Signal contacts (size 22) are front release, front removable with solder post termination Power contacts are front release, front removable with solder post termination Talking Dog_BKA.xls 2 of 3 BKA CONNECTOR SERIES Contacts supplied uninstalled SA SB SC SD W* Contacts supplied installed SE SF SG SH Solder Post Solder Post Size 22 Contact Part Number Dia. 0.025 0.025 0.025 0.025 Extension 0.150 0.250 0.375 0.500 Receptacle 031-1352-000 031-1352-001 031-1352-002 031-1352-003 RECEPTACLE CONNECTORS ONLY Connector is supplied with full complement of signal (size 22) and power contacts per ARINC 600. Coax, Quadrax, Triax, or Twinax contacts are not supplied. BKAF ONLY - Signal contacts (size 22) are front release, front removable with wrap post termination Power contacts are rear release, rear removable with crimp termination W* WA WB WC Talking Dog_BKA.xls Wrap Post Square 0.025 0.025 0.025 Wrap Post Extension .250 .375 .500 Size 22 Contact Part Number Receptacle 031-1351-000 031-1351-001 031-1351-002 3 of 3