Product Brief TDA 7100 T h e T D A 7 1 0 0 i s a s i n g l e c h i p A S K / F S K t r a n s m i tt e r operating in the 433 to 435MHz frequency band. The IC offers a high level of integration and needs only a few external components to build a complete transmitter. The device contains a fully integrated PLL synthesizer and a high efficiency power amplifier to drive the antenna. A special circuit design and a unique power amplifier contribute to low current consumption and to extended battery life. Additional features are a power down mode and a clock output ( Fref ÷16 ) which could be used as CLK for a µC. Applications Remote control systems Alarm systems Communication systems Ordering information Type Ordering Code Package TDA 7100 SP000296466 PG-TSSOP-10 Type Modulation Frequency WLC-Kit TDA 7100 - TDA 7200 ASK/FSK 433 to 435MHz Evaluation Kit www. i n f i n e o n .co m / wi re less Wireless Control Features Fully integrated PLL frequency synthesizer Fully integrated VCO (no need for external components) ASK and FSK modulation Frequency range 433 to 435MHz High efficiency power amplifier (typically +5dBm output power by 3V supply voltage) Low supply current Voltage supply range 2.1 - 4V Temperature range -20 to +70°C Power down mode Crystal oscillator in 13.5MHz band (Fo = 32 x Fref ) Built-in low/high frequency switch for FSK Mode Divided clock output for µC clocking (Fref ÷16) Low external component count Product Brief Block Diagram FSK Data Input 7 FSK Switch Crystal 13.56 MHz ASK Data Input 6 4 Power Down Control 10 Power Supply VS 2 OR Power Supply On 5 XTAL Osc PFD :64 VCO Power AMP :2 LF :16 9 Power Amplifier Output 8 Power Amplifier Ground 3 1 Ground Clock Output Product Summary Type TDA 7100 Frequency range 433 to 435MHz Data rate 20KHz both ASK and FSK Supply voltage 2.1 to 4V Supply current (PLL Enabled Mode/Transmit Mode @Vs=3V) 4.2/7.5mA Power Down Current 4µA RF Transmit Power typ. +5.2dBm into 50Ω load @3V +6.9dBm into 50Ω load @4V Package PG-TSSOP-10 Operating Temperature Range -20 to +70°C How to reach us: http://www.infineon.com Published by Infineon Technologies AG 81726 Munich, Germany © 2007 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this Product Brief shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Published by Infineon Technologies AG Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Ordering No. B142-H9096-X-X-7600