DATA SHEET Pb - Ligitek Electronics Co. Ltd.

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
1W Power Light LED
Pb
Lead-Free Parts
LGXV-521E/TR1-A01
DATA SHEET
DOC. NO : QW0905-LGXV-521E/TR1-A01
REV.
: A
DATE
: 16 - Sep. - 2010
發行
立碁電子
DCC
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Typical Applications
Features
*. High Flux per LED
*. Very long operating life(up to 100k hours).
*. Available in White.
*. More Energy Efficient than lncandescent and most Halogen lamps.
*. Low voltage DC operated..
*. Cool beam, safe to the touch.
*. Instant light(less than 100 ns).
*. Fully dimmable.
*. No UV.
*. Reading Light (car,bus,aircraft)
*. Portable(flashlight,bicycle).
*. LCD Backlights / Light Guides.
*. Automotive Exterior (Stop-Tail-Tum,CHMSL,Mirror Side Repeat).
*. Commercial and Residential Architectural lighting.
*. Mini-accent / Uplighters / Downlighters / Orientation lighting
*. Fiber Optic Alternative / Decorative / Entertainment lighting.
*. Security / Garden lighting.
*. Cove / Undershelf / Task lighting.
*. Traffic signaling / Beacons / Rail crossing and Wayside lighting.
*. Decorative.
*. Sign and channel Letter.
Dimension
7.4
5.0
1.6
1.6
1
6
2
5
3
4
5.0
Recommended Solder Patter
7.9
1.0
1.0
1.2
1.3
0.2
0.4
1.2
0.4
1.0
1.2
2.2 4.2
3.75
2
Note : The tolerances unless mentioned is ±0.1mm,Unit=mm.
5
Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted.
2.Specifications are subject to change without notice.
Page 1/12
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Absolute Maximum Ratings at Ta=25 ℃
Ratings
Parameter
Symbol
UNIT
White
IF
350
mA
Power Dissipation
PD
1.4
W
Peak pulse current
Duty [email protected]
IFP
500
mA
LED junction Temperature
Tj
125
℃
Reverse Current(VR=5V)
Ir
50
μA
ESD Sensitivity
VB
±500
V
Storage Temperature
Tstg
-30 ~ +100
℃
Operating Temperature
Topr
-20 ~ +80
℃
Soldering Temperature
Tp
260
℃
Hand Soldering Time
at320° C(Max)
Tsol
3
seconds
DC Forward Current
Note:
1.Proper current derating must be observed to maintain temperature below the maximum.
2.LEDS are not designed to be driven in reverse bias.
Luminous Intensity Characteristics at 350mA
(Ratings At 25℃ Ambient)
PART NO
LGXV-521E/TR1-A01
Luminous
Flux
@350mA
Emission
Color
White
Min.
Typ.
Max.
51.7
75
----
Note :
1. White emitters are built with InGaN.
2. Luminous Intensity is measured with an accuracy of ±10%
Page 2/12
Units
lm
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Forward Voltage Characteristics at 350mA
(Ratings At 25℃ Ambient)
PART NO
Vf
Emission
Color
Min.
Typ.
Max.
White
----
3.5
4.0
LGXV-521E/TR1-A01
Units
V
Note : Forward Voltage is measured with an accuracy of ±0.1V
Chromaticity Coordinates Characteristics at 350mA
(Ratings At 25℃ Ambient )
PART NO
Chromaticity
Coordinates
Emission
Color
LGXV-521E/TR1-A01
White
Y
X
Min.
Max.
Min.
Max.
0.397
0.367
0.454
0.446
Note : ±0.01 is tester tolerance.
Emission Angle Characteristics at 350mA
(Ratings At 25℃ Ambient )
PART NO
LGXV-521E/TR1-A01
Emission
Color
Lambertian
Units
White
120
Degess
Page 3/12
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Bin Code Description
Bin Code
Luminous
Intensity
CIE
Forward
Voltage
F24
QN
3.1-3.2
Luminous Intensity
(lm)
@IF=350mA
Bin
Code
Min.
Max.
F23
51.7
67.2
F24
67.2
87.4
F25
87.4
133.6
Color Rank
@IF=350mA
Forward Voltage(V)
@IF=350mA
PM-QP
2.8-2.9
2.9-3.0
3.0-3.1
3.1-3.2
3.2-3.3
3.3-3.4
3.4-3.5
3.5-3.6
Page 4/12
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Bins Code of chromaticity coordinates
Color Coordiante at350mA
CCT(K)
3050~3250
3250~3500
BIN CODE
1
2
3
4
X
Y
X
Y
X
Y
X
Y
PM
0.438
0.44
0.454
0.446
0.444
0.426
0.43
0.421
PN
0.43
0.421 0.444
0.426
0.438
0.412
0.424
0.407
PO
0.424
0.407
0.438
0.412
0.429
0.394
0.416
0.389
PP
0.416
0.389
0.429
0.394
0.422
0.379
0.41
0.374
QM
0.421
0.433
0.438
0.44
0.43
0.421
0.414
0.414
QN
0.414
0.414
0.43
0.421
0.424
0.407
0.409
0.4
QO
0.409
0.4
0.424
0.407
0.416
0.389
0.402
0.382
QP
0.402
0.382
0.416
0.389
0.41
0.374
0.396
0.367
NOTE: Tolerance on each color bin(x,y)is ±0.01
Page 5/12
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
CIE Chromaticity Diagram
0.46
3050K
3250K
0.44
3500K
PM
QM
0.42
PN
QN
0.40
PO
QO
PP
0.38
QP
0.36
0.34
0.32
0.30
0.28
0.26
0.28
0.30
0.32
0.34
0.36
0.38
Page 6/12
0.40
0.42
0.44
0.46
0.48
0.50
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Recommended Profile for Reflow Soldering
Pb -free solder temperature profile
Pb -free solder Temperature profile
Pre-heat
Pre-heat time
Peak-Temperature
Soldering time condition
180-200° C
120 Sec Max
260° C Max
10 Sec Max
260° C.Max.
10 Sec .Max.
1-5° C/Sec.
60 Sec.Max.
Above220 ° C
6° C/Sec.
Pre-heating
180-200 ° C
1-5° C/Sec.
120 Sec. Max.
(1) Reflow soldering should not be done more than two times.
(2) When soldering,do not put stress on the LEDs during heating.
(3) After soldering,do not warp the circuit board.
(4) The encapsulated material of the LEDs is silicone.
Precautions should be taken to avoid the strong pressure on the encapsulated part.
So when using the chip mounter,the picking up nozzle that does not affect the
silicone resin should be used.
Hand Soldering Conditions:
Do not exceed 3 seconds at maximum 320° C under soldering iron.(one time only)
Page 7/12
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Fig.1 Forward current vs. Forward Voltage
Forward Current(mA)
400
300
200
100
0
2.0
2.5
3.0
3.5
4.0
4.5
Forward Voltage(V)
Fig.2 Forward current vs. Luminous Flux
Relative Luminous Flux( %)
1.2
1.0
0.8
0.6
0.4
0.2
0
100
200
300
IF(mA)
Page 8/12
400
500
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Relative Luminous Flux( %)
Fig.4 Luminous Spectrum(Ta=25 ℃)
SPECTRAL RADIANCE
100
80
60
40
20
0
400
500
600
700
800
Wavelength (nm)
Fig.5 Directivity Radiation
0°
-30°
30°
-60°
100% 75% 50%
60°
25%
0
Page 9/12
25% 50% 75% 100%
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Carrier Type Dimensions
4.0
-
8.0
2.0
ψ1.5
1.75
7.5
16
7
+
13.3
Polarity
Note : The tolerances unless mentioned is ± 0.2mm.
Packing Specifications
Label
Aluminum Moist-Proof bag
Label
Desiccant
Page 10/12
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Label Explanation
Pb
LIGITEK ELECTRONICS CO., LTD.
BIN : Luminous Intensity
LGXW-521E/TR1-A01
PART :
LGWV-521E/TR1-A01
LOT :
GS1-090315
QTY(PCS):
2000
HUE : Chromaticity Coordinates
(CIE_x , CIE_y)
GS1-090311
2000
BIN/HUE :
F24/QN
3.3-3.4V
F24/QN
3.3-3.4V
3.3-3.4 : Forward Voltage
Reel Dimensions
20.7±1.0
13.5±1.0
330±2.0
99±2.0
13.5±1.0
Page 11/12
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Reliability Test
Item
Description
Stress Condition
RTOL
Room Temperature Operation Life
25° C,Max If
1000 hours
WHT
Wet High Temperature
85° C/85%RH
1000 hours
-40/+110° C,
30min dwell,<5min trans.
-40/+110° C,
20min dwell,<20min trans.
200 cycles
Test Duration
TC
Temperature Cycling
TS
Thermal Shorck
HTSL
Hight Temperature Storage Life
120° C
1000 hours
LTSL
Low Temperature Storage Life
-40° C
1000 hours
SHR
Solder Heat Resistance
260±5° C,5secs
MS
Mechanical Shock
1500G,0.5msec pulse,
5 shocks each 6 axis
ND
Natural Drop
On concrete from 1.2m, 3xtimes
RV
Random Vibration
6G RMS from 10 to 2KHz,
10mins/axis
VVF
Variable Vibration Frequency
10-2000-10Hz, 20G
1min, 1.5mm, 3timesx/axis
Note:
Failuer Criteria:
Electrical failures
VF shift >=10%
IR < 50 [email protected] = 5v
Ligitek output Degradation
%Iv shift >[email protected] or 200cycle
Broken or damaged pockage or lead
Dimension out of tolerance
Page 12/12
200 cycles