DATA SHEET Pb - Ligitek Electronics Co. Ltd.

!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
LED SMD
Pb
Lead-Free Parts
LG-197RGB-CT/T2-3C1
DATA SHEET
DOC. NO : QW0905-LG-197RGB-CT/T2-3C1
REV.
:
C
DATE
:
25 - Dec. - 2014
發行
立碁電子
DCC
!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 1/14
PART NO. LG-197RGB-CT/T2-3C1
Features:
1. Package in 8.0mm carrier tape on 7" diameter reel.
2. Compatible with automatic placement equipment.
3. Compatible with infrared and vapor phase reflow solder process.
Descriptions:
1. The LG-197 SMD Taping is much smaller than
lead frame type components, thus enable smaller
board size, higher packing density, reduced storage
space and finally smaller equipment to be obtained.
2. Besides, lightweight makes them ideal for miniature
applications. etc.
Applications:
1. Automotive : backlighting in dashboard and switch.
2. Telecommunication : indicator and backlighting in telephone and fax.
3. Flat backlight for LCD, switch and symbol
4. General use.
Device Selection Guide:
PART NO
LG-197RGB-CT/T2-3C1
MATERIAL
COLOR
Emitted
AlGaInP
Red
InGaN
Green
lnGaN
Blue
Lens
Water Clear
!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 2/14
PART NO. LG-197RGB-CT/T2-3C1
Package Dimensions
2
0.55
3
Soldering
Terminal
1.5
0.25
0.18
0.4
G
R
0.8
1.1
B
0.4
RESIN
1
4
0.6
PCB
Common Andoe Mark
0.6
B G R
4 3 2
-
-
-
+
1
Note : 1.All dimension are in millimeter tolerance is ̈́0.1mm unless otherwise noted.
2.Specifications are subject to change without notice.
Recommended Soldering Pad Dimensions
˅ˁ˅
˃ˁˌ
Note : The tolerances unless mentioned is ̈́0.1mm,Anglë́0.5. Unit=mm.
-
˃ˁˈ
+
˄ˁˈ
1.6
!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 3/14
PART NO. LG-197RGB-CT/T2-3C1
Absolute Maximum Ratings at Ta=25 к
Ratings
Parameter
Symbol
UNIT
HRF
DGM
DBK
Power Dissipation
PD
72
108
108
mW
Peak Forward Current
Duty [email protected]
IFP
90
100
100
mA
Forward Current
IF
30
30
30
mA
Reverse Current @5V
Ir
10
50
50
ȝA
Electrostatic Discharge
ESD
2000
500
500
V
Operating Temperature
Topr
-20 ~ + 80
к
Storage Temperature
Tstg
-30 ~ + 100
к
!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 4/14
PART NO. LG-197RGB-CT/T2-3C1
Typical Electrical & Optical Characteristics (Ta=25 к)
Items
Luminous Intensity
Dominant Wavelength
Spectral Line Half-Width
Forward Voltage
Viewing Angle
Symbol
Iv
ȜD
Ϧӳ
VF
2ș 1/2
Min.
Typ. Max. UNIT
HRF
5
8
----
DGM
32
80
----
DBK
8
12.5
----
HRF
----
630
----
DGM
----
525
----
DBK
----
470
----
HRF
----
20
----
DGM
----
36
----
DBK
----
30
----
HRF
1.5
----
2.4
DGM
2.6
----
3.2
DBK
2.6
----
3.2
HRF
----
140
----
DGM
----
140
----
DBK
----
140
----
Note : 1.The forward voltage data did not including ̈́0.1V testing tolerance.
2. The luminous intensity data did not including ̈́15% testing tolerance.
CONDITION
mcd
IF=2mA
nm
IF=2mA
nm
IF=2mA
V
IF=2mA
deg
IF=2mA
!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 5/14
PART NO. LG-197RGB-CT/T2-3C1
Luminous Intensity Classification
BIN CODE
HRF
Min.
Max.
J
5
8
K
8
12.5
L
12.5
20
M
20
32
BIN CODE
DGM
Iv(mcd) at 2mA
Min.
Max.
N
32
50
P
50
80
Q
80
125
R
125
200
BIN CODE
DBK
Iv(mcd) at 2mA
Iv(mcd) at 2mA
Min.
Max.
K
8
12.5
L
12.5
20
M
20
32
N
32
50
!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 6/14
PART NO. LG-197RGB-CT/T2-3C1
Typical Electro-Optical Characteristics Curve
HRF CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.5
Relative Intensity
Normalize @2mA
Forward Current(mA)
1000
100
10
1.0
3.0
2.5
2.0
1.5
1.0
0.5
0
0.1
1.0
1.5
2.0
2.5
3.0
1.0
10
Fig.3 Forward Voltage vs. Temperature
Fig.4 Relative Intensity vs. Temperature
3.0
Relative [email protected]
[email protected]
1.2
Forward [email protected]
Normalize @25к
1000
Forward Current(mA)
Forward Voltage(V)
1.1
1.0
0.9
0.8
-40
-20
-0
20
40
60
80
100
Ambient Temperature( к)
Fig.5 Relative Intensity vs. Wavelength
Relative [email protected]
100
1.0
0.5
0
550
600
650
Wavelength (nm)
700
2.5
2.0
1.5
1.0
0.5
0
-40
-20
-0
20
40
60
80
Ambient Temperature( к)
Fig.6 Directive Radiation
100
!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 7/14
PART NO. LG-197RGB-CT/T2-3C1
Typical Electro-Optical Characteristics Curve
DGM CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.0
2.5
Relative Intensity
Normalize @2mA
Forward Current(mA)
1000
100
10
1.0
2.0
1.5
1.0
0.5
0.0
0.1
1.0
2.0
3.0
4.0
1.0
5.0
10
Fig.3 Forward Voltage vs. Temperature
Fig.4 Relative Intensity vs. Temperature
1.2
3.0
Relative [email protected]
Normalize @25к
Forward [email protected]
Normalize @25к
1000
Forward Current(mA)
Forward Voltage(V)
1.1
1.0
0.9
0.8
-40
-20
0
20
40
60
80
100
Fig.5 Relative Intensity vs. Wavelength
0.5
0.0
500
550
Wavelength (nm)
2.0
1.5
1.0
0.5
0.0
-40
-20
0
20
40
60
Fig.6 Directive Radiation
1.0
450
2.5
80
Ambient Temperature( к)
Ambient Temperature( к)
Relative [email protected]
100
600
100
!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 8/14
PART NO. LG-197RGB-CT/T2-3C1
Typical Electro-Optical Characteristics Curve
DBK CHIP
Fig.2 Relative Intensity vs. Forward Current
3.0
1000
Relative Intensity
Normalize @2mA
Forward Current(mA)
Fig.1 Forward current vs. Forward Voltage
100
10
1
01
2.5
2.0
1.5
1.0
0.5
0.0
1.0
2.0
3.0
4.0
1
5.0
10
1.2
1.1
1.0
0.9
0.8
0
20
40
60
80
100
Fig.5 Relative Intensity vs. Wavelength
1.0
0.5
0.0
400
450
500
Wavelength (nm)
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-40
-20
0
20
40
60
80
Ambient Temperature( к)
Ambient Temperature( к)
Relative [email protected]
Fig.4 Relative Intensity vs. Temperature
Relative [email protected]
Normalize @25к
Forward [email protected]
Normalize @25к
Fig.3 Forward Voltage vs. Temperature
-20
1000
Forward Current(mA)
Forward Voltage(V)
-40
100
550
Fig.6 Directive Radiation
100
!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 9/14
PART NO. LG-197RGB-CT/T2-3C1
Carrier Tape Dimensions
4.0̈́0.2
0.23
2.0
1.75
-
3.5̈́0.2
8.0̈́0.3
1.75
5.3
0.7
+
1.65
4.0̈́0.2
Note : The tolerances unless mentioned is ̈́0.1mm,Angle ̈́ʳ0.5. Unit=mm.
Θ Packing Specifications
Label
Aluminum Moist-Proof bag
Label
Part No.
Description
Quantity/Reel
LG-197RGB-CT/T2-3C1
8.0mm tape,7"reel
4000 devices
!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 10/14
PART NO. LG-197RGB-CT/T2-3C1
Label Explanation
LIGITEK ELECTRONICS CO., LTD.
Pb
!QBSU!;
!
MH.2:8SHC.DU0U3.4D2
BIN : Luminous Intensity
!MPU!;
!
HT22491279
!
WG;2/6.3/5
!RUZ)QDT*;!
5111
!
WG;3/7.4/3
!CJO0IVF!;!
L.Q.M
!
WG;3/7.4/3
HUE : Dominant Wavelength
VF : Forward Voltage
Reel Dimensions
0.2
0.4
0.8
0.8
0.6
0.2
0.4
0.6
2.0̈́0.5
178̈́1.5
60̈́1.0
9.0̈́1.0
ӿ13.5̈́1.0
12.0̈́1.0
!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 11/14
PART NO. LG-197RGB-CT/T2-3C1
Box Explanation
1. 5 BAG / INNER BOX
2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm
H
W
L
3. 10 INNER BOXES / CARTON
4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm
L
W
H
!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LG-197RGB-CT/T2-3C1
Page 12/14
Recommended Soldering Conditions
1. Hand Solder
Basic spec is Љ 280к 3 sec one time only.
2 PB-Free Reflow Solder
1~5°C/sec
Preheat
180~200°C
1~5°C/sec
260°C MaX. 10sec.Max
6°C/sec
Above 220°C
60 sec.Max.
120 sec.Max.
Note:
1.Reflow soldering should not be done more than two times.
2.When soldering,do not put stress on the LEDs during heating.
3.After soldering,do not warp the circuit board.
!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 13/14
PART NO. LG-197RGB-CT/T2-3C1
Precautions For Use:
Storage time:
1.The operation of Temperatures and RH are : 5 к~35к,RH60%.
2.Once the package is opened, the products should be used within a week.
Otherwise, they should be kept in a damp proof box with descanting agent.
Considering the tape life, we suggest our customers to use our products within
a year at І30к and І90% relative humidity(RH) (from production date).
3.If opened more than one week in an atmosphere 5 к ~ 35к,RH60%,
they should be treated at 60 к±5 кfo r 15hrs.
Drive Method:
LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into
the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series
with the LED.
Consider worst case voltage variations than could occur across the current limiting resistor. The forward
current should not be allowed to change by more than 40% of its desired value.
Circuit model A
Circuit model B
LED
LED
(A) Recommended circuit.
(B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED.
Cleaning:
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.
ESD(Electrostatic Discharge):
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
!LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 14/14
PART NO. LG-197RGB-CT/T2-3C1
Reliability Test:
Classification
Test Item
Test Condition
Reference
Standard
Operating Life Test
1.Ta=Under Room Temperature As Per Data Sheet
Maximum Rating.
2.If=2mA
3.t=1000 hrs (-24hrs, +72hrs)
MIL-STD-750D: 1026
MIL-STD-883D: 1005
JIS C 7021: B-1
High Temperature
Storage Test
1.Ta=105 к²5к
2.t=1000 hrs (-24hrs, +72hrs)
MIL-STD-883D:1008
JIS C 7021: B-10
Low Temperature
Storage Test
1.Ta=-40 к²5к
2.t=1000 hrs (-24hrs, +72hrs)
JIS C 7021: B-12
High Temperature
High Humidity
Storage Test
1.Ta=65 к²5к
2.RH=90%~95%
3.t=1000hrs¡Ó2hrs
Endurance
Test
Thermal Shock Test
Solderability Test
Environmental
Test
Temperature
Cycling
IR Reflow
1.Ta=105 к̈́ˈк&-40к̈́5к
(10min)
(10min)
2.total 10 cycles
1.T.Sol=235 к̈́5к
2.Immersion time 2 ̈́0.5sec
3.Coverage Њ95% of the dipped surface
1.105 кʳ̑ʳ25кʳ̑ʳˀ55кʳ̑ʳ25к
30mins 5mins 30mins 5mins
2.10 Cyeles
1.T=260°C Max. 10sec.Max.
2. 6 Min
MIL-STD-202F:103B
JIS C 7021: B-11
MIL-STD-202F: 107D
MIL-STD-750D: 1051
MIL-STD-883D: 1011
MIL-STD-202F: 208D
MIL-STD-750D: 2026
MIL-STD-883D: 2003
IEC 68 Part 2-20
JIS C 7021: A-2
MIL-STD-202F: 107D
MIL-STD-750D: 1051
MIL-STD-883D: 1010
JIS C 7021: A-4
MIL-STD-750D:2031.2
J-STD-020