1.6x0.8x0.5mm BI-COLOR SURFACE MOUNT LED Part Number: APHB1608SGEC Super Bright Green High Efficiency Red Features Description z 1.6mmX0.8mm SMT LED, 0.5mm thickness. The Super Bright Green source color devices are made with z Compatible with reflow soldering. Gallium Phosphide Green Light Emitting Diode. z Available in various color combination. The High Efficiency Red source color devices are made with z Package: 2000pcs / reel . Gallium Arsenide Phosphide on Gallium Phosphide Orange z Moisture sensitivity level : level 3. Light Emitting Diode. z Tinned pads for improved solderability. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK7899 REV NO: V.7A DATE: MAR/04/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203011314 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 5 15 *5 *15 7 15 *5 *12 2θ1/2 Super Bright Green (GaP) APHB1608SGEC 130° Water Clear High Efficiency Red (GaAsP/GaP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Green High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 627 nm IF=20mA Super Bright Green High Efficiency Red 568 617 nm IF=20mA Spectral Line Half-width Super Bright Green High Efficiency Red 30 45 nm IF=20mA C Capacitance Super Bright Green High Efficiency Red 15 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Green High Efficiency Red 2.2 2 2.5 2.5 V IF=20mA IR Reverse Current Super Bright Green High Efficiency Red 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Green High Efficiency Red Units 62.5 75 mW DC Forward Current 25 30 mA Peak Forward Current [1] 140 160 mA Power dissipation Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAK7899 REV NO: V.7A DATE: MAR/04/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203011314 APHB1608SGEC Super Bright Green SPEC NO: DSAK7899 REV NO: V.7A DATE: MAR/04/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203011314 High Efficiency Red SPEC NO: DSAK7899 REV NO: V.7A DATE: MAR/04/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203011314 APHB1608SGEC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAK7899 REV NO: V.7A DATE: MAR/04/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203011314 PACKING & LABEL SPECIFICATIONS APHB1608SGEC All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAK7899 REV NO: V.7A DATE: MAR/04/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203011314