1.5mm SIDE LOOK INFRARED EMITTING DIODE Part Number: AM4457F3C Features Description z Side looking package. F3 Made with Gallium Arsenide Infrared Emitting diodes. z Mechanically and spectrally matched to the phototransistor. z RoHS compliant. Package Dimensions CATHODE Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAD2243 REV NO: V.9A DATE: JAN/06/2013 PAGE: 1 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202001776 Selection Guide Part No. AM4457F3C Dice Po (mW/sr) [2] @ 20mA Lens Type F3 (GaAs) Min. Typ. 3 7 *2 *5 Water Clear Viewing Angle [1] 2θ1/2 70° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Radiant Intensity / luminous flux: +/-15%. *Radiant Intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] F3 VF 1.2 1.6 V IF=20mA Reverse Current F3 IR 10 uA VR = 5V Capacitance F3 C 90 pF VF=0V;f=1MHz Peak Spectral Wavelength F3 λP 940 nm IF=20mA Spectral Bandwidth F3 Δλ1/2 50 nm IF=20mA Notes: 1. Forward Voltage: +/-0.1V. 2. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Symbol F3 Units Power dissipation PD 80 mW DC Forward Current IF 50 mA Peak Forward Current [1] iFS 1.2 A Reverse Voltage VR 5 V Operating Temperature TA -40 To +85 °C TSTG -40 To +85 °C Storage Temperature Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/100 Duty Cycle, 10μs Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAD2243 REV NO: V.9A DATE: JAN/06/2013 PAGE: 2 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202001776 AM4457F3C SPEC NO: DSAD2243 REV NO: V.9A DATE: JAN/06/2013 PAGE: 3 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202001776 PACKING & LABEL SPECIFICATIONS AM4457F3C All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAD2243 REV NO: V.9A DATE: JAN/06/2013 PAGE: 4 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202001776