1.6x1.5mm BI-COLOR SMD CHIP LED LAMP Part Number: APTB1615SURKSGC-F01 Hyper Red Super Bright Green Features Description z 1.6mmx1.5mm SMT LED, 0.7mm thickness. The Hyper Red source color devices are made with Al- z Low power consumption. GaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. The Super Bright Green source color devices are made with z Ideal for backlight and indicator. Gallium Phosphide Green Light Emitting Diode. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions RED GREEN Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1104 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: FEB/01/2011 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203002131 Selection Guide Part No. Dice APTB1615SURKSGC-F01 Iv (mcd) [2] @ 20mA Lens Type Hyper Red (AlGaInP) Min. Typ. 120 200 8 15 Water Clear Super Bright Green (GaP) Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Red Super Bright Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 650 565 nm IF=20mA Hyper Red Super Bright Green 630 568 nm IF=20mA Spectral Line Half-width Hyper Red Super Bright Green 28 30 nm IF=20mA C Capacitance Hyper Red Super Bright Green 35 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Super Bright Green 1.95 2.2 2.5 2.5 V IF=20mA IR Reverse Current Hyper Red Super Bright Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 185 140 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1104 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: FEB/01/2011 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203002131 APTB1615SURKSGC-F01 Hyper Red SPEC NO: DSAF1104 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: FEB/01/2011 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203002131 Super Bright Green SPEC NO: DSAF1104 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: FEB/01/2011 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203002131 APTB1615SURKSGC-F01 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAF1104 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: FEB/01/2011 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203002131 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAF1104 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu APTB1615SURKSGC-F01 DATE: FEB/01/2011 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203002131