57mm (2.3INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SA23-11YWA Yellow Features Description z 2.3 inch digit height. The Yellow source color devices are made with Gallium z Low current operation. Arsenide Phosphide on Gallium Phosphide Yellow Light z Excellent character appearance. Emitting Diode. z High light output. z Easy mounting on P.C. boards or sockets. z Multicolor available. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAN0650 REV NO: V.1A DATE: MAR/21/2011 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000237 Selection Guide Part No. Dice SA23-11YWA Iv (ucd) [1] @ 10mA Lens Type Yellow (GaAsP/GaP) Min. Typ. 21000 40000 *5600 *14000 White Diffused Description Common Anode, Rt. Hand Decimal Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage (DP) Yellow 8.4 (4.2) 10.0 (5.0) V IF=20mA IR Reverse Current (Per Chip) Yellow 10 (10) uA VR=5V (VR=5V) Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Yellow Units Power dissipation (DP) 300 (150) mW DC Forward Current (DP) 30 (30) mA Peak Forward Current [1] (DP) 140 (140) mA 5 (5) V Reverse Voltage (Per Chip) Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAN0650 REV NO: V.1A DATE: MAR/21/2011 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000237 Yellow SA23-11YWA SPEC NO: DSAN0650 REV NO: V.1A DATE: MAR/21/2011 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000237 SPEC NO: DSAN0650 REV NO: V.1A DATE: MAR/21/2011 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000237 PACKING & LABEL SPECIFICATIONS SA23-11YWA SPEC NO: DSAN0650 REV NO: V.1A DATE: MAR/21/2011 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000237 SPEC NO: DSAN0650 REV NO: V.1A DATE: MAR/21/2011 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000237 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAN0650 REV NO: V.1A DATE: MAR/21/2011 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000237