7.6mm x 7.6mm SUPER FLUX LED LAMP Part Number: WP76761CSEC/E Hyper Red Features Description z Super flux output. The Hyper Red source color devices are made with Al- z Design for high current operation. GaInP on GaAs substrate Light Emitting Diode. z Outstanding material efficiency. z Reliable and rugged. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF2280 REV NO: V.2 DATE: AUG/01/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101007175 Selection Guide Part No. Dice WP76761CSEC/E Lens Type Hyper Red (AlGaInP) Water Clear Iv (mcd) [2]* @ 20mA Φv (mlm) [2] @ 20mA Viewing Angle [1] Min. Typ. Typ. 2θ1/2 1900 3000 600 20° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *LEDs are binned according to their Luminous intensity. 3. Drive current between 10mA and 30mA are recommended for long term performance. 4. Operation at current below 10mA is not recommended. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 630 nm IF=20mA Hyper Red 621 nm IF=20mA Spectral Line Half-width Hyper Red 20 nm IF=20mA C Capacitance Hyper Red 25 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red 2 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2280 REV NO: V.2 DATE: AUG/01/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101007175 Hyper Red WP76761CSEC/E SPEC NO: DSAF2280 REV NO: V.2 DATE: AUG/01/2011 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101007175 PACKING & LABEL SPECIFICATIONS WP76761CSEC/E SPEC NO: DSAF2280 REV NO: V.2 DATE: AUG/01/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101007175 SPEC NO: DSAF2280 REV NO: V.2 DATE: AUG/01/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101007175 SPEC NO: DSAF2280 REV NO: V.2 DATE: AUG/01/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101007175