Specifications

38.1mm (1.5INCH) SINGLE DIGIT NUMERIC
DISPLAY
Part Number: SA15-11EWA
High Efficiency Red
Features
Description
z 1.5 INCH DIGIT HEIGHT.
The High Efficiency Red source color devices are made with
z LOW CURRENT OPERATION.
Gallium Arsenide Phosphide on Gallium Phosphide Orange
z EXCELLENT CHARACTER APPEARANCE.
Light Emitting Diode.
z HIGH LIGHT OUTPUT.
z EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
z I.C. COMPATIBLE.
z MULTICOLOR AVAILABLE.
z MECHANICALLY RUGGED.
z STANDARD : GRAY FACE, WHITE SEGMENT.
z RoHS COMPLIANT.
Package Dimensions& Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ± 0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
SPEC NO: DSAA5264
REV NO: V.11
APPROVED: WYNEC
CHECKED: Joe Lee
DATE: MAY/24/2007
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1301000190
Selection Guide
Part No.
Dice
SA15-11EWA
Lens Type
High Efficiency Red (GaAsP/GaP)
WHITE DIFFUSED
Iv (ucd) [1]
@ 10mA
Min.
Typ.
3000
16000
Description
Common Anode, Rt.
Hand Decimal.
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
High Efficiency Red
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
627
nm
IF=20mA
High Efficiency Red
625
nm
IF=20mA
Spectral Line Half-width
High Efficiency Red
45
nm
IF=20mA
C
Capacitance
High Efficiency Red
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Per Segment Or (DP)
High Efficiency Red
4.0
(2.0)
5.0
(2.5)
V
IF=20mA
IR
Reverse Current
Per Segment Or (DP)
High Efficiency Red
10
(10)
uA
VR=10V
(VR=5V)
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Units
Power dissipation
Per Segment Or (DP)
150
(75)
mW
DC Forward Current
Per Segment Or (DP)
30
(30)
mA
Peak Forward Current [1]
Per Segment Or (DP)
160
(160)
mA
10
(5)
V
Reverse Voltage
Per Segment Or (DP)
Operating / Storage Temperature
Lead Solder Temperature[2]
-40°C To +85°C
260°C For 3-5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
SPEC NO: DSAA5264
REV NO: V.11
APPROVED: WYNEC
CHECKED: Joe Lee
DATE: MAY/24/2007
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1301000190
High Efficiency Red
SA15-11EWA
SPEC NO: DSAA5264
REV NO: V.11
APPROVED: WYNEC
CHECKED: Joe Lee
DATE: MAY/24/2007
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1301000190
SPEC NO: DSAA5264
REV NO: V.11
APPROVED: WYNEC
CHECKED: Joe Lee
DATE: MAY/24/2007
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1301000190
PACKING & LABEL SPECIFICATIONS
SPEC NO: DSAA5264
REV NO: V.11
APPROVED: WYNEC
CHECKED: Joe Lee
SA15-11EWA
DATE: MAY/24/2007
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1301000190