GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS SMC5.0 THRU SMC170CA Stand-off Voltage 5.0 to 170 Volts Peak Pulse Power 1500 Watts FEATURES • • • • • • • • • • • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance 1500W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% Excellent clamping capability Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bidirectional types For devices with V(BR)≥10V, ID are typically less 1.0μA High temperature soldering guaranteed: 250℃/10 seconds at terminals DO-214AB(SMC) Dimensions in inches and (millimeters) MECHANICAL DATA • • • • • Cass: JEDEC DO-214 AB, molded plastic over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: For uni-direction types the Color band denotes the cathode, which is postitive with respect to the anode under normal TVS operation Mounting Position: any Weight: 0.007 ounces, 0.21 gram DEVICES FOR BIDRECTIONAL APPLICATIONS • For bidirectional use suffix C or CA for types SMC-5.0 thru SMC-170 (e.g. SMC5.0C, SMC170CA). Electrical characteristics apply in both in both directions. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified Ratings Symbols Value Unit Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1.2,FIG.1) PPPM Minimum1500 Watts Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3) IPPM See Table 1 Amps IFSM 200.0 Amps VF TJ, TSTG 3.5 50 to + 150 Volts Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (Notes 2,3) – unidirectional only Maximum instantaneous forward voltage at 100A (NOTE3) unidirectional only Operating Junction and Storage Temperature Range Notes: 1. 2. 3. Non-repetitive current pulse, per Fig.3 and derated above T A=25℃ per Fig.2 Mounted on 0.31×0.31” (8.0×8.0mm) copper pads to each terminal Measured on 8.3ms single half sine-wave. For uni-directional devices only. Web Site: www.hkmic.com ℃ GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS SMC5.0 THRU SMC170CA Stand-off Voltage 5.0 to 170 Volts Peak Pulse Power 1500 Watts Electrical Characteristic (TA =25℃ unless otherwise noted) Table 1 Stand-off Voltage VWM (Volts) MAX Maximum Reverse Leakage at VWM (Note 3) ID (μA) Maximum Peak Pulse Surge Current IPPM (Note 2)(Amps) Maximum Clamping Voltage at IPPM VC (Volts) 7.82 7.07 8.15 7.37 8.82 7.98 9.51 8.6 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38 34.4 40.7 36.8 44.9 40.6 10 10 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5 5 6 6 6.5 6.5 7 7 7.5 7.5 8 8 8.5 8.5 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 1000 1000 1000 1000 500 500 200 200 100 100 50 50 20 20 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 156.3 163 131.6 145.6 122 133.9 112.8 125 104.9 116.3 100 110.3 94.3 104.2 88.8 97.4 79.8 88.2 74.6 82.4 68.2 75.4 63 69.8 58.1 64.7 55.8 61.5 52.1 57.7 49.2 54.3 46.6 51.4 41.9 46.3 38.1 42.3 34.9 38.6 32.2 35.6 30 33 28 31 25.4 28.1 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12 14.3 12.9 15 13.6 15.9 14.4 16.9 15.4 1838 17 20.1 18.2 22 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43 38.9 46.6 42.1 50 45.4 53.5 48.4 59 53.3 Breakdown Voltage V(BR) (Volts) (Note 1) UNI BI MIN 5V0 5V0A 6V0 6V0A 6V5 6V5A 7V0 7V0A 7V5 7V5A 8V0 8V0A 8V5 8V5A 9V0 9V0A 10V 10VA 11V 11VA 12V 12VA 13V 13VA 14V 14VA 15V 15VA 16V 16VA 17V 17VA 18V 18VA 20V 20VA 22V 22VA 24V 24VA 26V 26VA 28V 28VA 30V 30VA 33V 33VA 5V0C 5V0CA 6V0C 6V0CA 6V5C 6V5CA 7V0C 7V0CA 7V5C 7V5CA 8V0C 8V0CA 8V5C 8V5CA 9V0C 9V0CA 10VC 10VCA 11VC 11VCA 12VC 12VCA 13VC 13VCA 14VC 14VCA 15VC 15VCA 16VC 16VCA 17VC 17VCA 18VC 18VCA 20VC 20VCA 22VC 22VCA 24VC 24VCA 26VC 26VCA 28VC 28VCA 30VC 30VCA 33VC 33VCA 6.4 6.4 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10 10 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20 20 22.2 22.2 24.4 24.4 26.47 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 Device Type SMC5.0 SMC5.0A SMC6.0 SMC6.0A SMC6.5 SMC6.5A SMC7.0 SMC7.0A SMC7.5 SMC7.5A SMC8.0 SMC8.0A SMC8.5 SMC8.5A SMC9.0 SMC9.0A SMC10 SMC10 A SMC11 SMC11A SMC12 SMC12A SMC13 SMC13A SMC14 SMC14A SMC15 SMC15A SMC16 SMC16A SMC17 SMC17A SMC18 SMC18A SMC20 SMC20A SMC22 SMC22A SMC24 SMC24A SMC26 SMC26A SMC28 SMC28A SMC30 SMC30A SMC33 SMC33A Test Current at IT (mA) Device Marking Code Web Site: www.hkmic.com GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS SMC5.0 THRU SMC170CA Stand-off Voltage 5.0 to 170 Volts Peak Pulse Power 1500 Watts Electrical Characteristic (TA =25℃ unless otherwise noted) Table 1 Device Marking Code UNI BI MIN MAX Test Current at IT (mA) 36V 36VA 40V 40VA 43V 43VA 45V 45VA 48V 48VA 51V 51VA 54V 54VA 58V 58VA 60V 60VA 64V 64VA 70V 70VA 75V 75VA 78V 78VA 85V 85VA 90V 90VA 100V 100VA 110V 110VA 120V 120VA 130V 130VA 150V 150VA 160V 160VA 170V 170VA 36VC 36VCA 40VC 40VCA 43VC 43VCA 45VC 45VCA 48VC 48VCA 51VC 51VCA 54VC 54VCA 58VC 58VCA 60VC 60VCA 64VC 64VCA 70VC 70VCA 75VC 75VCA 78VC 78VCA 85VC 85VCA 90VC 90VCA 100VC 100VCA 110VC 110VCA 120VC 120VCA 130VC 130VCA 150VC 150VCA 160VC 160VCA 170VC 170VCA 40 40 44.4 44.4 47.8 47.8 50 50 53.3 53.3 56.7 56.7 60 60 64.4 64.4 66.7 66.7 71.1 71.1 77.8 77.8 83.3 83.3 86.7 86.7 94.4 94.4 100 100 111 111 122 122 133 133 144 144 167 167 178 178 189 189 48.9 44.2 54.3 49.1 58.4 52.8 61.1 55.3 65.1 58.9 69.3 62.7 73.3 66.3 78.7 71.2 81.5 73.7 86.9 78.6 95.1 86 102 92.1 106 95.8 115 104 122 111 136 123 149 135 163 147 176 159 204 185 218 197 231 209 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Device Type SMC36 SMC36A SMC40 SMC40A SMC43 SMC43A SMC45 SMC45A SMC48 SMC48A SMC51 SMC51A SMC54 SMC54A SMC58 SMC58A SMC60 SMC60A SMC64 SMC64A SMC70 SMC70A SMC75 SMC75A SMC78 SMC78A SMC85 SMC85A SMC90 SMC90A SMC100 SMC100A SMC110 SMC110A SMC120 SMC120A SMC130 SMC130A SMC150 SMC150A SMC160 SMC160A SMC170 SMC170A Notes: (1) (2) (3) (4) (5) Breakdown Voltage V(BR) (Volts) (Note 1) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM (Note 3) ID (μA) Maximum Peak Pulse Surge Current IPPM (Note 2)(Amps) Maximum Clamping Voltage at IPPM VC (Volts) 36 36 40 40 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 130 130 150 150 160 160 170 170 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 23.3 25.8 21 23.3 19.6 21.6 18.7 20.6 17.5 19.4 16.5 18.2 15.6 17.2 14.6 16 14 15.5 13.2 14.6 12 13.3 11.2 12.4 10.8 11.9 9.9 10.9 9.4 10.3 8.4 9.3 7.7 8.5 7 7.8 6.5 7.2 5.6 6.2 5.2 5.8 4.9 5.5 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103 93 107 96 114 103 125 113 134 121 139 126 151 137 160 146 179 162 196 177 214 193 231 209 268 243 287 259 304 275 V(BR) measured after IT applied for 300μs IT=square wave pulse or equivalent Surge current waveform per Figure 3 and derate per Fig.2 For bidirectional type having VWM of 10 volts and less, the ID limit is doubled For the bi-directional SMC5.0CA, the maximum V(BR) is 7.25 Volts All terms and symbols are consistent with ANSI/IEEE C62.35 Web Site: www.hkmic.com GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS Stand-off Voltage SMC5.0 THRU SMC170CA 5.0 to 170 Volts Peak Pulse Power 1500 Watts FIG.1- PEAK PULSE POWER RATING CURVE Non-Repetitive Pulse Waveform Shown in Figure 3 TA=25 ℃ 10 1.0 0.31×0.31"(8.0×8.0mm )COPPER PAD AREAS 0.1 0.1μs 1.0μs 10μs 1.0ms 100μs 10ms t d ,PULSE WIDTH, SEC 75 50 25 0 td 1.0 FIG.5- TYPICAL JUNCTION CAPACITANCE BIDIRECTIONAL Measured at Zero Bias VR, MEASURED at STAND-OFF Voltage.VMW 1.0 100 10 400 V WM ,REVERSE STAND-OFF VOLTAGE, VOLTS Measured at Stand-Off Voltage (V MW) 100 100 200 175 100 10 1,000 10 150 FIG.4- TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL 1,000 TJ=25 ℃ f = 1.0MHz Vsig = 50mVp-p 1.0 125 TJ=25 ℃ f = 1.0MHz Vsig = 50mVp-p Measured at Zero Bias 10 100 10,000 t, TIME, ms 10,000 75 20,000 4.0 3.0 2.0 50 TA , AMBIENT TEMPERATURE (℃) TJ=25 ℃ Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of lPPM 10/1000usec Waveform as Defined by R.E.A. 0 25 6,000 Half Value-lpp 2 50 0 CJ, JUNCTION CAPACITANCE, pF Peak Value lppm 100 CJ, CAPACITANCE, pF I PPM, PEAK PULSE CURRENT-% tf=10use 0 FIG.2- PULSE DERATING CURVE 100 FIG.3- PULSE WAVEFORM 150 400 IFSM, PEAK FORWARD SURGE CURRENT, AMPERES PPPM, PEAK PULSE POWER, kW 100 PEAK PULSE POWER (PPP ) OR CURRENT (IPP ) DERATING IN PERCENTAGE % RATING AND CHARACTERISTIC CURVES SMC5.0 THRU SMC170CA V WM ,STAND-OFF VOLTAGE, VOLTS Web Site: www.hkmic.com FIG.6- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 200 8.3ms Single Half Since-Wave (JEDEC Method) UNIDIRECTIONAL ONLY 100 10 1 10 NUMBER OF CYCLES AT 60 Hz 100