8 7 6 5 160.00 mm [6.299 in] 4 3 2 1 90.50 mm [3.563 in] A D D 160.00 mm [6.299 in] B B 153.77 mm [6.054 in] 150.95 mm [5.943 in] 128.83 mm [5.072 in] A ASSEMBLY C 2.50 mm [0.098 in] R9.53 mm 4X [0.375 in] SECTION A-A 140.00 mm [5.512 in] 2.50 mm [0.098 in] 147.40 mm [5.803 in] (ORDERED SEPARATELY) 108.03 mm [4.253 in] C 96.04 mm [3.781 in] Polycarbonate Version Only File #E65324 NEMA 4, 4X 76.37 mm [3.007 in] 84.00 mm [3.307 in] 6.00 mm [0.236 in] 3.73 mm 4X 131.90 mm [5.193 in] [0.147 in] SECTION B-B B 2.79 mm 4X [0.110 in] 138.00 mm [5.433 in] 151.46 mm [5.963 in] 3.90 mm 4X 127.00 mm [5.000 in] [0.153 in] (MOUNTING HOLES) NOTE Purchased assembly includes box, styled lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) STEEL INNER PANEL 151.00 mm [5.945 in] Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] 3.00 mm 10X Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) [0.118 in] B 1555S 1555S Regular Enclosure General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 R7.50 mm 4X [0.295 in] 149.70 mm [5.894 in] 140.00 mm [5.512 in] 147.00 mm 138.00 mm [5.787 in] [5.433 in] 135.00 mm 154.00 mm [5.315 in] [6.063 in] 132.00 mm [5.197 in] 96.00 mm [3.780 in] A M3 BRASS INSERTS 4X 115.00 mm [4.528 in] 140.00 mm [5.512 in] M4 STAINLESS STEEL INSERTS 7 Steel Inner Panels Steel Panel / P.C. Board Machine Screw [M3 x 8mm Plated] Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 112.00 mm [4.409 in] 1598ATS100 SC1554 1555S LID - INSIDE 6 1554RPL 1591MM100 A 24.00 mm [0.945 in] BOX - INSIDE 8 139.27 mm [5.483 in] 120.00 mm [4.724 in] 1555SGY 1555S2GY ACCESSORIES 5 4 3 2 1