www.hammondmfg.com 1416 Series - NEMA 1 Ventilated Component Case Commercial Enclosures Application Construction Finish • Designed to provide mechanical protection for components requiring ventilation. • Suitable for use where heat dissipation is required. • Base is formed from 16 gauge steel with two 0.5”/0.75” conduit knockouts located in each end. • Four .125” high raised dimples with mounting holes are provided on the base. • Cover is formed from 18 gauge steel with 0.235” x 1.5” ventilating slots (0.199” x 1.12” on E & G only). • Screw holes and offsets in the cover allow easy assembly. • Base and cover are finished in ANSI 61 gray powder coating. Standards • Complies with • NEMA Type 1 Technical references and CAD downloads available at www.hammondmfg.com 329 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com 1416 Series - NEMA 1 Ventilated Component Case Commercial Enclosures Part No. 1416E 1416G 1416I 1416K 1416M 1416O 1416Q 1416T A 6 10 10 11 12 15 20 20 B 4 4 6 7 8 10 10 10 Dimensions C D 4 2.5 4 2.5 6 4.5 7 5.5 8 6.5 8 8.5 8 8.5 10 8.5 E 4 7 7 8 9 12 17 17 Technical references and CAD downloads available at www.hammondmfg.com F 2 2 3 4 5 6 6 6 Ventilated Area G H 2.50 4.06 2.50 8.31 3.25 7.68 5.00 7.68 5.00 10.31 5.00 12.93 5.00 18.18 6.75 15.56 Ship Wt. lbs. 2 2 4 6 8 10 12 14 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice 330