8 7 6 5 90.00 mm [3.543 in] A 2.50 mm [0.098 in] D 58.83 mm [2.316 in] B B 4 3 2 1 46.87 mm [1.845 in] D 78.41 mm [3.087 in] 90.00 mm [3.543 in] 70.00 mm [2.756 in] 2.79 mm 2X [0.110 in] 2.50 mm [0.098 in] A 83.77 mm [3.298 in] C ASSEMBLY (ORDERED SEPARATELY) 38.71 mm [1.524 in] 54.50 mm [2.146 in] 58.01 mm 77.47 mm [2.284 in] [3.050 in] C SECTION A-A Polycarbonate Version Only R8.33 mm 4X [0.328 in] File #E65324 NEMA 4, 4X 3.73 mm 4X [0.147 in] 43.51 mm [1.713 in] 60.50 mm [2.382 in] 6.00 mm [0.236 in] 84.00 mm [3.307 in] 57.00 mm [2.244 in] SECTION B-B Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] 61.75 mm [2.431 in] [0.153 in] (MOUNTING HOLES) 24.10 mm [0.949 in] B NOTE STEEL INNER PANEL 3.90 mm 4X 41.90 mm [1.649 in] 3.00 mm 4X [0.118 in] Purchased assembly includes box, styled lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) B 1555E R5.56 mm 4X [0.219 in] 84.00 mm [3.307 in] 65.00 mm [2.559 in] 1555E Regular Enclosure 43.50 mm [1.713 in] General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 R7.50 mm [0.295 in] 70.00 mm [2.756 in] ACCESSORIES 43.50 mm [1.713 in] 81.00 mm [3.189 in] 62.00 mm [2.441 in] 58.00 mm [2.283 in] M4 STAINLESS STEEL INSERTS M3 BRASS INSERTS 4X 45.00 mm [1.772 in] A 6 1554EPL 1591MM100 1598ATS100 SC1554 [0.118 in] A 1555E 81.00 mm [3.189 in] LID - INSIDE BOX - INSIDE 7 Steel Inner Panels Steel Panel / P.C. Board Machine Screw [M3 x 8mm Plated] Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 3.00 mm 2X 58.00 mm [2.283 in] 8 1555EGY 1555E2GY 5 4 3 2 1