8 7 6 5 160.00 mm [6.299 in] 4 3 2 1 90.50 mm [3.563 in] A D D 83.77 mm [3.298 in] B B 90.00 mm [3.543 in] SECTION A-A A 128.83 mm [5.072 in] 147.32 mm [5.800 in] ASSEMBLY 121.46 mm [4.782 in] 2.50 mm [0.098 in] C C 3.73 mm 4X [0.147 in] 2.50 mm [0.098 in] Polycarbonate Version Only 38.71 mm [1.524 in] 76.87 mm [3.027 in] 84.50 mm [3.327 in] 58.01 mm [2.284 in] (ORDERED SEPARATELY) 77.47 mm [3.050 in] 6.00 mm [0.236 in] R8.33 mm 4X [0.328 in] SECTION B-B Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) 3.00 mm 6X [0.118 in] M3 BRASS INSERTS 4X 121.50 mm [4.783 in] 58.00 mm [2.283 in] 78.72 mm [3.099 in] R7.50 mm 4X [0.295 in] 58.00 mm [2.283 in] 42.00 mm [1.654 in] 3.00 mm 4X [0.118 in] 135.00 mm [5.315 in] 147.00 mm [5.787 in] 7 79.42 mm [3.127 in] Steel Inner Panels Steel Panel / P.C. Board Machine Screw [M3 x 8mm Plated] Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 1554JPL 1591MM100 1598ATS100 SC1554 24.00 mm [0.945 in] A M4 STAINLESS STEEL INSERTS 132.00 mm [5.197 in] BOX - INSIDE 8 1555KGY 1555K2GY ACCESSORIES 121.50 mm [4.783 in] A 1555K Regular Enclosure General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 R6.00 mm 4X [0.236 in] 45.00 mm [1.772 in] B 1555K 150.90 mm [5.941 in] 57.00 mm [2.244 in] NOTE Purchased assembly includes box, styled lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) STEEL INNER PANEL 3.90 mm 4X [0.153 in] (MOUNTING HOLES) 136.00 mm [5.354 in] Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] [0.110 in] 136.00 mm [5.354 in] 154.00 mm [6.063 in] B 2.79 mm 4X 130.66 mm [5.144 in] File #E65324 NEMA 4, 4X 1555K LID - INSIDE 6 5 4 3 2 1