8 7 6 120.00 mm [4.724 in] 5 4 3 2 1 60.50 mm [2.382 in] A D D 83.76 mm [3.298 in] B B 90.00 mm [3.543 in] A 87.10 mm [3.429 in] ASSEMBLY 2.50 mm [0.098 in] C 91.74 mm [3.612 in] SECTION A-A 3.73 mm 4X [0.147 in] 77.00 mm [3.031 in] R8.33 mm 4X [0.328 in] 2.50 mm [0.098 in] C Polycarbonate Version Only 46.87 mm [1.845 in] 54.50 mm [2.146 in] 6.00 mm [0.236 in] M3 BRASS INSERTS 4X 68.00 mm [2.677 in] 2.79 mm 2X SECTION B-B B (ORDERED SEPARATELY) 38.71 mm [1.524 in] 77.47 mm [3.050 in] File #E65324 NEMA 4, 4X Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] [0.110 in] 91.74 mm [3.612 in] NOTE 107.00 mm [4.213 in] 100.00 mm [3.937 in] 100.00 mm [3.937 in] STEEL INNER PANEL Purchased assembly includes box, styled lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0 / 5VA @ 3mm) Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) 112.00 mm [4.409 in] 57.00 mm 45.00 mm [2.244 in] [1.772 in] 77.00 mm [3.031 in] [0.153 in] (MOUNTING HOLES) 95.00 mm [3.740 in] 114.00 mm [4.488 in] A General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 68.00 mm 79.16 mm [2.677 in] [3.116 in] 3.00 mm 2X [0.118 in] 7 1555FGY 1555F2GY ACCESSORIES 24.00 mm [0.945 in] R7.50 mm 4X [0.295 in] 68.00 mm [2.677 in] Steel Inner Panels Steel Panel / P.C. Board Machine Screw [M3 x 8mm Plated] Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 79.50 mm [3.130 in] 77.00 mm [3.031 in] 1555FPL 1591MM100 1598ATS100 SC1554 M4 STAINLESS STEEL INSERTS A 92.00 mm [3.622 in] BOX - INSIDE 8 1555F Regular Enclosure [0.118 in] 42.00 mm [1.654 in] 3.90 mm 4X 1555F 3.00 mm 4X R6.00 mm 4X [0.236 in] B 1555F LID - INSIDE 6 5 4 3 2 1