Thin Film Anti-Sulfurated Chip Resistor AS73 Series MERITEK Feature and Applications Special passivation for moisture sensitive applications Special materials, design, and processing for high sulfur applications Tolerances as low as 0.05% and TCR’s as low as 10 ppm. Test proven immunity to humidity, moisture, and sulfur RoHS Compliant / Lead Free Precision automotive and industrial motor controls, pump controls, dispensing systems Welding equipment Audio / video amplifiers Notebook and laptop motherboard Handheld instruments such as printers, scanners, and test instruments Base station and remote telecom applications Medical test and monitoring equipment. PART NUMBERING SYSTEM Recommend Land Pattern AS73 Thin Film Anti-sulfurated Precision Resistors TCR (PPM/°C) C D F ±10 ±15 ±25 Size Code 1J Size 0603 Packaging Code Code T Packaging Tape and Reel Resistance Value 24R9 24.9Ω F 2A 1001 F C G ±50 2A 0805 B B Bulk 1001 1KΩ Resistance Tolerance Code A Value ±0.05% T B ±0.1% Type 1J (0603) 2A(0805) 5003 500KΩ C ±0.25% D ±0.5% A Unit: mm A 0.80 1.00 B 1.00 1.00 C 0.90±0.2 1.35±0.2 F ±1% Construction L D1 W Alumina Substrate BottomElectrode (NiCr) Top Electrode (Cu) T D2 Edge Electrode (NiCr) Resistor Layer (NiCr) Barrier Layer (Ni) Overcoat (Epoxy) External Electrode (Sn) Marking Dimensions Unit: mm Type Size (Inch) L W T D1 D2 1J 2A 0603 0805 1.55±0.10 2.00±0.15 0.80±0.10 1.25±0.15 0.45±0.10 0.55±0.10 0.30±0.20 0.30±0.20 0.30±0.20 0.40±0.25 Weight (g) (1000pcs) 1.83 4.71 Rev. 7 Thin Film Anti-Sulfurated Chip Resistor AS73 Series MERITEK Derating Curve Power ratio(%) 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 Ambient Temperature(℃) Standard Electrical Specifications Item Resistance Range Power Rating at 70°C Operating Temp. Range Max. Operating Voltage Max. Overload Voltage 1J (0603) 1/16W -55 ~ +155°C 50V 100V 24.9Ω – 332K ±25 ±50 2A (0805) 1/10W -55 ~ +155°C 100V 200V 24.9Ω – 500KΩ ±25 ±50 Type ±0.1% ±0.25% ±0.5% ±1% TCR (PPM/°C) Operating Voltage=√(P*R) or Max. operating voltage listed above, whichever is lower. Overload Voltage=2.5*√(P*R) or Max. overload voltage listed above, whichever is lower. Special Electrical Specifications Item Power Rating at 70°C Operating Temp. Range 1/16W -55 ~ +155°C Max. Max. Operating Overload Voltage Voltage Type 1J (0603) 2A (0805) 1/10W -55 ~ +155°C 50V 100V 100V 200V Resistance Range ±0.05% ±0.1% 24.9Ω – 12KΩ – 12.1KΩ – 332KΩ 24.9Ω – 15KΩ – 15.1KΩ – 500KΩ TCR (PPM/°C) ±10 ±15 ±10 ±15 Operating Voltage=√(P*R) or Max. operating voltage listed above, whichever is lower. Overload Voltage=2.5*√(P*R) or Max. overload voltage listed above, whichever is lower. Rev. 7 Thin Film Anti-Sulfurated Chip Resistor AS73 Series MERITEK Environmental Characteristics Requirement Item Tol. ≦ 0.05% MIL-STD-202F Method 304 +25/-55/+25/+125/+25C Temperature Coefficient of Resistance As Spec. (T.C.R.) Short Time Overload Insulation Resistance ∆R±0.05% Endurance ∆R±0.2% ∆R±0.2% for high power rating ∆R±0.2% >7kΩ ∆R±0.5% ∆R±0.5% for high power rating Damp Heat with Load ∆R±0.05% ∆R±0.3% ∆R±0.5% for high power rating Bending Strength ∆R±0.05% Solderability 95% min. coverage Resistance to Soldering Heat ∆R±0.05% Dielectric Withstand Voltage By Type Thermal Shock ∆R±0.05% ∆R±0.25% ∆R±0.05% ∆R±0.2% Low Temperature Operation JIS-C-5201-1 5.5 RCWV*2.5 or Max. overload voltage for 5 seconds MIL-STD-202F Method 302 Apply 100VDC for 1 minute >1000 MΩ ∆R±0.05% Test Method Tol. > 0.05% ∆R±0.2% MIL-STD-202F Method 108A 702C, Max. working voltage for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” MIL-STD-202F Method 103B 402C, 90~95% R.H. Max. working voltage for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” JIS-C-5201-1 6.1.4 Bending amplitude 3 mm for 10 seconds MIL-STD-202F Method 208H 2455C for 3 seconds ∆R±0.2% MIL-STD-202F Method 210E 260±5C for 10 seconds MIL-STD-202F Method 301 Max. overload voltage for 1 minute ∆R±0.5% for high power rating MIL-STD-202F Method 107G -55C ~150C, 100 cycles JIS-C-5201-1 7.1 1 hour, -65C, followed by 45 minutes of RCWV ASTM-B-809-95 Sulfur Test 0.5% 3~5ppm H2S, 502C, 91~93% R.H., no power rating for 1000 hrs Storage Temperature: 25±3C; Humidity < 80%RH Reflow Rev. 7 Thin Film Anti-Sulfurated Chip Resistor AS73 Series MERITEK Marking 0603 3digit marking 3digit marking for Example: 14C=13K7Ω 13C=13K3Ω 68B=4K99Ω 68X=49.9Ω 14C Marking Label Code E96 Code E96 Code E96 Code E96 01 100 25 178 49 316 73 562 02 102 26 182 50 324 74 576 03 105 27 187 51 332 75 590 04 107 28 191 52 340 76 604 05 110 29 196 53 348 77 619 06 113 30 200 54 357 78 634 07 115 31 205 55 365 79 649 08 118 32 210 56 374 80 665 09 121 33 215 57 383 81 681 10 124 34 221 58 392 82 698 11 127 35 226 59 402 83 715 12 130 36 232 60 412 84 732 13 133 37 237 61 422 85 750 14 137 38 243 62 432 86 768 15 140 39 249 63 442 87 787 16 143 40 255 64 453 88 806 17 147 41 261 65 464 89 825 18 150 42 267 66 475 90 845 19 154 43 274 67 487 91 866 20 158 44 280 68 499 92 887 21 162 45 287 69 511 93 909 22 165 46 294 70 523 94 931 23 169 47 301 71 536 95 953 24 174 Code A Multiplier 10 48 B 0 10 1 10 0603 3digit marking for E24 E24 10 11 12 0805 4digit marking 13 309 C D 2 10 16 18 20 Example Resistance marking 3 10 Example: 101=100Ω 15 72 E 22 24 549 F 4 10 G 5 10 96 H 6 10 976 X 7 10 Y -1 10 Z -2 10 -3 102=1KΩ 27 30 33 36 39 43 47 51 56 62 68 100Ω 2.2KΩ 10KΩ 49.9KΩ 100KΩ 1000 2201 1002 4992 1003 75 82 91 Rev. 7 Thin Film Anti-Sulfurated Chip Resistor AS73 Series MERITEK Packaging Unit : mm Type ØA ØB ØC W Paper T Tape (EA) Emboss Plastic Tape (EA) 1J (0603) 178.0±1.0 60.0+1.0 13.5±0.7 9.5±1.0 11.5±1.0 5,000 - 2A(0805) 178.0±1.0 60.0+1.0 13.5±0.7 9.5±1.0 11.5±1.0 5,000 - Paper Tape Specifications T op T a p e B ottom T ape ψ D0 E A F B T P1 R e sistor P aper T ape P2 P0 W direction of unreeling Unit: mm Type A B W E F P0 P1 P2 ΦD0 T 1J (0603) 1.10±0.05 1.90±0.05 8.00±0.10 1.75±0.05 3.5±0.05 4.00±0.10 4.00±0.10 2.00±0.05 1.55±0.05 0.60±0.03 2A(0805) 1.60±0.05 2.37±0.05 8.00±0.10 1.75±0.05 3.5±0.05 4.00±0.10 4.00±0.10 2.00±0.05 1.55±0.05 0.75±0.05 Peel force of top cover tape The peel speed shall be about 300mm/min±5% The peel force of top cover tape shall be between 8g to 40g Top Cover Tape 8~40g 165~180 Rev. 7