Pre-Irradiation IRHNM57110 Footnotes: Ã Pulse width ≤ 300 µs; Duty Cycle ≤ 2% Ä Total Dose Irradiation with VGS Bias. À Repetitive Rating; Pulse width limited by maximum junction temperature. Á VDD = 50V, starting TJ = 25°C, L=1.0 mH Peak IL = 6.9A, VGS =12V Â ISD ≤ 6.9A, di/dt ≤ 560A/µs, VDD ≤ 100V, TJ ≤ 150°C 12 volt VGS applied and V DS = 0 during irradiation per MIL-STD-750, method 1019, condition A. Å Total Dose Irradiation with VDS Bias. 80 volt VDS applied and V GS = 0 during irradiation per MlL-STD-750, method 1019, condition A. Case Outline and Dimensions — SMD-0.2 2.69 [.106] MAX. 5.74 [.226] 5.08 [.200] 4X 0.25 [.010] REF. 2X 8.15 [.321] 7.75 [.305] 1.02 [.040] 0.76 [.030] 2.13 [.084] 1.88 [.074] 0.83 [.032] REF. 2X 3 2.19 [.086] 1.93 [.076] 2 1 2X 4.67 [.184] 4.42 [.174] 5.16 [203] 4.90 [.193] TOP NOTES: 1. DIMENSIONING & TOLERANCING PER ASME Y14.5M-1994. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSIONS ARE SHOWN IN MILLIMETERS [INCHES]. 1.02 [.040] 0.76 [.030] 3X 0.25 [.010] REF. BOTTOM PAD ASSIGNMENT 1 = DRAIN 2 = GATE 3 = SOURCE IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 12/2007 www.irf.com 9