HT77XXA PFM Step-up DC/DC Converter Features · Low start-up voltage: 0.7V (Typ.) · High efficiency: 85% (Typ.) · Ultra low supply current IDD: 5mA (Typ.) · Low ripple and low noise · High output voltage accuracy: ±2.5% · Low shutdown current: 0.5mA (Typ.) · Output voltage: 2.7V, 3.0V, 3.3V, 5.0V · TO92, SOT89, SOT23 and SOT23-5 package · Output current up to 200mA Applications · Palmtops/PDAs · Cameras/Camcorders · Portable communicators/Smartphones · Battery-powered equipment General Description The HT77XXA series is a set of PFM step-up DC/DC converter with high efficiency and low ripple. The series features extremely low start-up voltage and high output voltage accuracy. They require only three external components to provide a fixed output voltage of 2.7V, 3.0V, 3.3V or 5.0V. CMOS technology ensures ultra low supply current and makes them ideal for battery-operated applications powered from one or more cells. The HT77XXA consists of an oscillator, a PFM control circuit, a driver transistor, a reference voltage unit, and a high speed comparator. They employ pulse frequency modulation (PFM) for minimum supply current and ripple at light output loading. These devices are available in space saving TO92, SOT89, SOT23 and SOT23-5 packages. For SOT23-5 package, it also build-in a chip enable function to reduce power consumption during shutdown mode. Selection Table Note: Part No. Output Voltage HT7727A 2.7V HT7730A 3.0V HT7733A 3.3V HT7750A 5.0V Package Marking TO92 SOT89 SOT23 SOT23-5 HT77XXA (for TO92) HT77XXA# (for SOT89) 7XXA# (for SOT23) 7XXA# (for SOT23-5) ²XX² stands for output voltages. Only lead free devices are available. ²#² stands for lead free devices. For the TO92 package, there will be a ²#² mark at the end of the date code. Block Diagram V re f L X L X L im ite r O S C 2 0 0 k H z B u ffe r P F M C o n tro l V O U T G N D C h ip E n a b le C E Rev 1.30 1 September 24, 2008 HT77XXA Pin Assignment S O T 8 9 T O 9 2 H T 7 7 X X A 1 2 S O T 2 3 -5 S O T 2 3 L X 5 V O U T 3 F r o n t V ie w G N D 4 3 H T 7 7 X X A # G N D V O U T L X B o tto m T o p V ie w 1 2 3 G N D V O U T L X G N D V O U T L X T o p V ie w 7 X X A # T o p V ie w 7 X X A # 1 2 1 2 3 G N D L X C E V O U T N C G N D L X C E V O U T N C V ie w Pin Description Pin No. Pin Name TO92 SOT89 SOT23 SOT23-5 ¾ ¾ ¾ 1 CE 2 2 3 2 VOUT ¾ ¾ ¾ 3 NC 1 1 1 4 GND 3 3 2 5 LX Description Chip enable pin, high active DC/DC converter output monitoring pin No connection Ground pin Switching pin Absolute Maximum Ratings Supply Voltage ..............................VSS-0.3V to VSS+7V Storage Temperature ............................-50°C to 125°C Operating Temperature ...........................-40°C to 85°C Note: These are stress ratings only. Stresses exceeding the range specified under ²Absolute Maximum Ratings² may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. Thermal Information Symbol Parameter qJA Thermal Resistance (Junction to Ambient) (Assume no ambient airflow, no heat sink) PD Package Max. Unit SOT89 300 °C/W TO92 300 °C/W SOT23 330 °C/W SOT23-5 320 °C/W SOT89 0.33 W TO92 0.33 W SOT23 0.3 W SOT23-5 0.31 W Power Dissipation Note: PD is measured at Ta= 25°C Rev 1.30 2 September 24, 2008 HT77XXA Electrical Characteristics Symbol VIN=VOUT´0.6; IOUT=10mA; Ta=25°C (Unless otherwise specified) Parameter Test Conditions Min. Typ. Max. Unit VIN Input Voltage ¾ ¾ ¾ 6 V VOUT Output Voltage Tolerance ¾ -2.5 ¾ 2.5 % VSTART Start-up Voltage (Fig. 1) VIN: 0®2V; IOUT=1mA ¾ 0.7 0.9 V VHOLD Minimum Hold-on Voltage (Fig. 1) VIN: 2®0V; IOUT=1mA ¾ ¾ 0.7 V IIN No-load Input Current (Fig. 1) IOUT=0mA ¾ 13 26 mA IDD Supply Current (Fig. 2) VS=VOUT+0.5V Measured at VOUT pin ¾ 5 10 mA ISHDN Shutdown Current CE=GND ¾ 0.5 1 mA VIH CE High Threshold ¾ 2 ¾ ¾ V VIL CE Low Threshold ¾ ¾ ¾ 0.4 V ILEAK LX Leakage Current (Fig. 3) VS=VOUT+0.5V, VX=6V Measured at the LX pin ¾ ¾ 0.9 mA fOSC Maximum Oscillator Frequency (Fig. 3) VS=VOUT´0.95, VX=6V Measured at LX pin ¾ 200 ¾ kHz DOSC Oscillator Duty Cycle (Fig. 3) VS=VOUT´0.95, VX=6V Measured at LX pin 65 75 85 % h Efficiency ¾ 85 ¾ % Note: ¾ Absolute maximum ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. The guaranteed specifications apply only for the test conditions listed. Test Circuit 1 N 5 8 1 7 1 0 0 m H V V IN 4 7 m F ( T a n ta lu m ) Rev 1.30 L X H T 7 7 X X A S e r ie s V O U T O U T 2 2 m F ( T a n ta lu m ) V S V O U T H T 7 7 X X A S e r ie s L X V S V O U T H T 7 7 X X A S e r ie s G N D G N D G N D (F ig . 1 ) (F ig . 2 ) (F ig . 3 ) 3 L X V 1 0 0 W X September 24, 2008 HT77XXA 2 .8 2 .7 2 .7 2 .6 2 .6 2 .5 2 .5 2 .4 2 .4 2 .3 2 .3 0 9 0 % 5 IN = 2 .0 V V IN = 1 .8 V 0 V 5 0 V 5 IN V = 1 .2 V = 1 .6 V IN 8 5 % E ffic ie n c y ( % ) O u tp u t V o lta g e ( V ) Typical Performance Characteristics 0 5 0 8 0 % 7 5 % 6 0 % 0 5 5 % 2 0 4 0 6 0 8 0 1 0 0 1 2 0 1 4 0 1 6 0 1 8 0 2 0 0 2 2 0 IN = 1 .2 V 6 5 % 5 0 V 7 0 % V 0 2 0 4 0 6 0 O u tp u t C u rre n t (m A ) 8 0 1 0 0 1 2 0 IN V IN = 2 .0 V V IN = 1 .8 V = 1 .6 V 1 4 0 1 6 0 1 8 0 2 0 0 2 2 0 O u tp u t C u rre n t (m A ) HT7727A Output Voltage v.s Output Current HT7727A Efficiency v.s Output Current (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) 3 6 0 3 6 0 3 1 0 V 2 6 0 IN 2 1 0 V 1 6 0 IN V = 1 .2 V = 1 .8 V R ip p le V o lta g e ( m V ) R ip p le V o lta g e ( m V ) 3 1 0 = 1 .6 V IN V 1 1 0 IN = 2 .0 V 6 0 1 0 2 6 0 2 1 0 V 1 6 0 IN = 1 .6 V V 1 1 0 IN V V 6 0 IN IN = 1 .8 V = 1 .2 V = 2 .0 V 1 0 0 2 0 4 0 6 0 8 0 1 0 0 1 2 0 1 4 0 1 6 0 1 8 0 2 0 0 0 2 2 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 1 0 0 1 1 0 O u tp u t C u rre n t (m A ) O u tp u t C u rre n t (m A ) HT7727A Ripple Voltage v.s Output Current HT7727A Ripple Voltage v.s Output Current (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) (CIN=47mF-Tantalum, L=100mH, COUT=22mF-Tantalum) 1 S ta rt-u p 0 .9 In p u t V o lta g e ( V ) 0 .8 H o ld - o n 0 .7 0 .6 0 .5 0 .4 0 .3 0 .2 0 .1 0 2 4 6 8 1 0 1 2 1 4 1 6 1 8 2 0 2 2 O u tp u t C u rre n t (m A ) HT7727A Start-up/Hold-on Voltage (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) Rev 1.30 4 September 24, 2008 HT77XXA 9 0 % IN = 2 .0 V V IN = 1 .8 V O u tp u t V o lta g e ( V ) 2 .9 5 V 2 .8 8 V 2 .8 0 IN V = 1 .2 V IN = 1 .5 V 8 5 % V 8 0 % E ffic ie n c y ( % ) 3 .0 3 2 .7 3 2 .6 5 2 .5 8 IN = 1 .5 V 7 5 % 6 5 % V = 1 .2 V IN 6 0 % 2 .5 0 0 2 0 4 0 6 0 8 0 1 0 0 1 2 0 1 4 0 1 6 0 1 8 0 2 0 0 V IN = 2 .0 V V IN = 1 .8 V 7 0 % 5 5 % 2 2 0 0 2 0 4 0 6 0 O u tp u t C u rre n t (m A ) 8 0 1 0 0 1 2 0 1 4 0 1 6 0 1 8 0 2 0 0 2 2 0 O u tp u t C u rre n t (m A ) HT7730A Output Voltage v.s Output Current HT7730A Efficiency v.s Output Current (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) 3 6 0 V 2 6 0 2 1 0 V 1 6 0 IN IN IN = 1 .8 V V IN = 2 .0 V 3 6 0 3 1 0 = 1 .5 V R ip p le V o lta g e ( m V ) R ip p le V o lta g e ( m V ) 3 1 0 V = 1 .2 V 1 1 0 6 0 2 6 0 1 6 0 0 2 0 4 0 6 0 8 0 1 0 0 1 2 0 1 4 0 1 6 0 1 8 0 2 0 0 2 2 0 V 1 1 0 IN = 1 .5 V IN = 1 .8 V V V 6 0 1 0 1 0 V 2 1 0 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 IN IN = 1 .2 V = 2 .0 V 1 0 0 1 1 0 O u tp u t C u rre n t (m A ) O u tp u t C u rre n t (m A ) HT7730A Ripple Voltage v.s Output Current HT7730A Ripple Voltage v.s Output Current (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) (CIN=47mF-Tantalum, L=100mH, COUT=22mF-Tantalum) 1 S ta rt-u p 0 .9 H o ld - o n In p u t V o lta g e ( V ) 0 .8 0 .7 0 .6 0 .5 0 .4 0 .3 0 .2 0 .1 0 2 4 6 8 1 0 1 2 1 4 1 6 1 8 2 0 2 2 O u tp u t C u rre n t (m A ) HT7730A Start-up/Hold-on Voltage (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) Rev 1.30 5 September 24, 2008 HT77XXA 9 0 % 3 .4 3 .2 V 3 .1 V 3 .0 IN IN = 2 .0 V V IN = 1 .8 V 8 5 % 8 0 % = 1 .2 V IN V = 1 .5 V E ffic ie n c y ( % ) O u tp u t V o lta g e ( V ) 3 .3 2 .9 2 .8 2 .7 7 5 % V IN = 1 .2 V V 7 0 % IN = 1 .5 V V IN = 1 .8 V 1 4 0 1 6 0 V 6 5 % = 2 .0 V IN 6 0 % 2 .6 5 5 % 2 .5 0 2 0 4 0 6 0 8 0 1 0 0 1 2 0 1 4 0 1 6 0 1 8 0 2 0 0 2 2 0 0 2 0 4 0 6 0 O u tp u t C u rre n t (m A ) 8 0 1 0 0 1 2 0 1 8 0 2 0 0 2 2 0 O u tp u t C u rre n t (m A ) HT7733A Output Voltage v.s Output Current HT7733A Efficiency v.s Output Current (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) 3 6 0 3 6 0 V IN = 1 .8 V V IN = 2 .0 V 3 1 0 R ip p le V o lta g e ( m V ) R ip p le V o lta g e ( m V ) 3 1 0 2 6 0 2 1 0 1 6 0 V 1 1 0 IN = 1 .2 V V IN = 1 .5 V 6 0 1 0 0 2 0 4 0 6 0 8 0 1 0 0 1 2 0 1 4 0 1 6 0 1 8 0 2 0 0 2 6 0 1 6 0 IN V IN = 1 .5 V = 1 .8 V V IN = 1 .2 V V IN = 2 .0 V 1 1 0 6 0 1 0 2 2 0 V 2 1 0 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 1 0 0 1 1 0 O u tp u t C u rre n t (m A ) O u tp u t C u rre n t (m A ) HT7733A Ripple Voltage v.s Output Current HT7733A Ripple Voltage v.s Output Current (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) (CIN=47mF-Tantalum, L=100mH, COUT=22mF-Tantalum) 1 S ta rt-u p 0 .9 H o ld - o n In p u t V o lta g e ( V ) 0 .8 0 .7 0 .6 0 .5 0 .4 0 .3 0 .2 0 .1 0 2 4 6 8 1 0 1 2 1 4 1 6 1 8 2 0 2 2 O u tp u t C u rre n t (m A ) HT7733A Start-up/Hold-on Voltage (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) Rev 1.30 6 September 24, 2008 5 .5 5 .2 4 .9 4 .6 4 .3 4 .0 3 .7 3 .4 3 .1 2 .8 2 .5 9 0 % 8 5 % V V IN V = 1 .5 V IN V = 2 .0 V IN = 3 .0 V 8 0 % E ffic ie n c y ( % ) O u tp u t V o lta g e ( V ) HT77XXA = 1 .2 V IN V = 3 .0 V IN 7 5 % 7 0 % V IN = 1 .2 V 6 5 % V 6 0 % V IN = 2 .0 V = 1 .5 V IN 5 5 % 0 2 0 4 0 6 0 8 0 1 0 0 1 2 0 1 4 0 1 6 0 1 8 0 2 0 0 0 2 0 4 0 6 0 O u tp u t C u rre n t (m A ) 8 0 1 0 0 1 2 0 1 4 0 1 6 0 1 8 0 2 0 0 2 2 0 O u tp u t C u rre n t (m A ) HT7750A Output Voltage v.s Output Current HT7750A Efficiency v.s Output Current (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) 3 6 0 3 6 0 2 6 0 2 1 0 V IN V IN = 2 .0 V V IN = 3 .0 V 3 1 0 R ip p le V o lta g e ( m V ) R ip p le V o lta g e ( m V ) 3 1 0 = 1 .5 V 1 6 0 1 1 0 V IN = 1 .2 V 6 0 2 6 0 2 1 0 0 2 0 4 0 6 0 8 0 1 0 0 1 2 0 1 4 0 1 6 0 1 8 0 2 0 0 2 2 0 IN = 2 .0 V V 1 1 0 IN V V 6 0 1 0 1 0 V 1 6 0 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 IN IN = 1 .5 V = 1 .2 V = 3 .0 V 1 0 0 1 1 0 O u tp u t C u rre n t (m A ) O u tp u t C u rre n t (m A ) HT7750A Ripple Voltage v.s Output Current HT7750A Ripple Voltage v.s Output Current (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) (CIN=47mF-Tantalum, L=100mH, COUT=22mF-Tantalum) S ta rt-u p 1 .2 1 .1 H o ld - o n In p u t V o lta g e ( V ) 1 0 .9 0 .8 0 .7 0 .6 0 .5 0 .4 0 .3 0 .2 0 .1 0 2 4 6 8 1 0 1 2 1 4 1 6 1 8 2 0 2 2 O u tp u t C u rre n t (m A ) HT7750A Start-up/Hold-on Voltage (CIN=47mF-Tantalum, L=47mH, COUT=22mF-Tantalum) Rev 1.30 7 September 24, 2008 HT77XXA Application Circuits Without CE Pin S R 0 6 0 2 S e r ie s A B C E le c tr o n ic s C o r p . 4 7 m H ~ 1 0 0 m H V 1 N 5 8 1 7 V IN 4 7 m F ( T a n ta lu m ) L X H T 7 7 X X A S e r ie s V O U T O U T 2 2 m F ( T a n ta lu m ) G N D With CE Pin S R 0 6 0 2 S e r ie s A B C E le c tr o n ic s C o r p . 4 7 m H ~ 1 0 0 m H V 1 N 5 8 1 7 V IN 4 7 m F ( T a n ta lu m ) L X H T 7 7 X X A S e r ie s C E S R 0 6 0 2 S e r ie s A B C E le c tr o n ic s C o r p . 4 7 m H ~ 1 0 0 m H V 2 2 m F ( T a n ta lu m ) G N D 1 N 5 8 1 7 V IN 4 7 m F ( T a n ta lu m ) L X H T 7 7 X X A S e r ie s C E Note: V O U T O U T V O U T O U T 2 2 m F ( T a n ta lu m ) G N D For the SOT23-5 package, when CE is pulled low, the internal blocks of the device, such as the reference band gap, gain block, and all feedback and control circuitry will be switched off. The boost converter¢s output, VOUT, will be at a value one Schottky diode voltage drop below the input voltage and the LX pin remains in a high impedance condition. The output capacitor and load at VOUT determine the rate at which VOUT decays. Rev 1.30 8 September 24, 2008 HT77XXA Package Information 3-pin TO92 Outline Dimensions A B D C E F G H Symbol A Rev 1.30 Dimensions in mil Min. Nom. Max. 170 ¾ 200 200 B 170 ¾ C 500 ¾ ¾ D 11 ¾ 20 E 90 ¾ 110 F 45 ¾ 55 G 45 ¾ 65 H 130 ¾ 160 I 8 ¾ 18 a 4° ¾ 6° 9 September 24, 2008 HT77XXA 3-pin SOT89 Outline Dimensions I A J B C E D G F Symbol Rev 1.30 H Dimensions in mil Min. Nom. Max. A 173 ¾ 181 B 59 ¾ 72 C 90 ¾ 102 D 35 ¾ 47 E 155 ¾ 167 F 14 ¾ 19 G 17 ¾ 22 H ¾ 59 ¾ I 55 ¾ 63 J 14 ¾ 17 10 September 24, 2008 HT77XXA 3-pin SOT23 Outline Dimensions D C L H E q e A A 2 b Symbol Rev 1.30 A 1 Dimensions in mm Min. Nom. Max. A 1.0 ¾ 1.3 A1 ¾ ¾ 0.1 A2 0.7 ¾ 0.9 b 0.35 ¾ 0.50 C 0.10 ¾ 0.25 D 2.7 ¾ 3.1 E 1.4 ¾ 1.8 e ¾ 1.9 ¾ H 2.6 ¾ 3.0 L 0.37 ¾ ¾ q 1° ¾ 9° 11 September 24, 2008 HT77XXA 5-pin SOT23-5 Outline Dimensions D C L H E q e A A 2 b Symbol Dimensions in mm Min. Nom. Max. 1.0 ¾ 1.3 A1 ¾ ¾ 0.1 A2 0.7 ¾ 0.9 A Rev 1.30 A 1 b 0.35 ¾ 0.50 C 0.10 ¾ 0.25 D 2.7 ¾ 3.1 E 1.4 ¾ 1.8 e ¾ 1.90 ¾ H 2.6 ¾ 3.0 L 0.37 ¾ ¾ q 1° ¾ 9° 12 September 24, 2008 HT77XXA Product Tape and Reel Specifications TO92 Reel Dimensions (Unit: mm) P a c k a g e U p , F la t S id e U p 3 0 P a c k a g e U p , F la t S id e D o w n 4 3 5 8 8 8 3 6 0 Rev 1.30 13 September 24, 2008 HT77XXA Reel Dimensions D T 2 A C B T 1 SOT89 Symbol Description Dimensions in mm A Reel Outer Diameter 180.0±1.0 B Reel Inner Diameter 62.0±1.5 C Spindle Hole Diameter D Key Slit Width 1.90±0.15 T1 Space Between Flange 12.4+0.2/-0.0 T2 Reel Thickness 17.0+0.0/-0.4 12.75+0.15/-0.00 SOT23, SOT23-5 Symbol Description Dimensions in mm A Reel Outer Diameter 178.0±1.0 B Reel Inner Diameter 62.0±1.0 C Spindle Hole Diameter 13.0±0.2 D Key Slit Width 2.50±0.25 T1 Space Between Flange 8.4+1.5/-0.0 T2 Reel Thickness 11.4+1.5/-0.0 Rev 1.30 14 September 8, 2008 HT77XXA Carrier Tape Dimensions P D h W 2 H 1 H H 0 l1 W 0 t W 1 W F 1 F 2 D 0 P 2 P 0 TO92 Symbol Note: Description Dimensions in mm I1 Taped Lead Length (2.5) P Component Pitch 12.7±1.0 P0 Perforation Pitch 12.7±0.3 P2 Component to Perforation (Length Direction) 6.35±0.40 F1 Lead Spread 2.5+0.4/-0.1 F2 Lead Spread 2.5+0.4/-0.1 Dh Component Alignment W Carrier Tape Width W0 Hold-down Tape Width 6.0±0.5 W1 Perforation Position 9.0±0.5 W2 Hold-down Tape Position H0 Lead Clinch Height 16.0±0.5 H1 Component Height Less than 24.7 D0 Perforation Diameter 4.0±0.2 t Taped Lead Thickness 0.7±0.2 H Component Base Height 19.0±0.5 0.0±0.1 18.0+1.0/-0.5 (0.5) Thickness less than 0.38±0.05mm~0.5mm P0 Accumulated pitch tolerance: ±1mm/20pitches. ( ) Bracketed figures are for reference only. Rev 1.30 15 September 24, 2008 HT77XXA Carrier Tape Dimensions P 0 D P 1 t E F W C D 1 B 0 P K 0 A 0 R e e l H o le IC M a r k in g SOT89 Symbol Description Dimensions in mm 12.0+0.3/-0.1 W Carrier Tape Width P Cavity Pitch E Perforation Position 1.75±0.10 8.0±0.1 F Cavity to Perforation (Width Direction) 5.50±0.05 D Perforation Diameter 1.5+0.1/-0.0 D1 Cavity Hole Diameter 1.5+0.1/-0.0 P0 Perforation Pitch 4.0±0.1 P1 Cavity to Perforation (Length Direction) 2.0±0.1 A0 Cavity Length 4.8±0.1 B0 Cavity Width 4.5±0.1 K0 Cavity Depth 1.8±0.1 t Carrier Tape Thickness C Cover Tape Width 0.300±0.013 9.3±0.1 SOT23, SOT23-5 Symbol Description Dimensions in mm W Carrier Tape Width 8.0±0.3 P Cavity Pitch 4.0±0.1 E Perforation Position 1.75±0.10 F Cavity to Perforation (Width Direction) 3.50±0.05 D Perforation Diameter 1.5+0.1/-0.0 D1 Cavity Hole Diameter 1.5+0.1/-0.0 P0 Perforation Pitch P1 Cavity to Perforation (Length Direction) 2.00±0.05 A0 Cavity Length 3.15±0.10 B0 Cavity Width 3.2±0.1 K0 Cavity Depth 1.4±0.1 t Carrier Tape Thickness C Cover Tape Width Rev 1.30 4.0±0.1 0.20±0.03 5.3±0.1 16 September 24, 2008 HT77XXA Holtek Semiconductor Inc. (Headquarters) No.3, Creation Rd. II, Science Park, Hsinchu, Taiwan Tel: 886-3-563-1999 Fax: 886-3-563-1189 http://www.holtek.com.tw Holtek Semiconductor Inc. (Taipei Sales Office) 4F-2, No. 3-2, YuanQu St., Nankang Software Park, Taipei 115, Taiwan Tel: 886-2-2655-7070 Fax: 886-2-2655-7373 Fax: 886-2-2655-7383 (International sales hotline) Holtek Semiconductor Inc. (Shanghai Sales Office) G Room, 3 Floor, No.1 Building, No.2016 Yi-Shan Road, Minhang District, Shanghai, China 201103 Tel: 86-21-5422-4590 Fax: 86-21-5422-4705 http://www.holtek.com.cn Holtek Semiconductor Inc. (Shenzhen Sales Office) 5F, Unit A, Productivity Building, Gaoxin M 2nd, Middle Zone Of High-Tech Industrial Park, ShenZhen, China 518057 Tel: 86-755-8616-9908, 86-755-8616-9308 Fax: 86-755-8616-9722 Holtek Semiconductor Inc. (Beijing Sales Office) Suite 1721, Jinyu Tower, A129 West Xuan Wu Men Street, Xicheng District, Beijing, China 100031 Tel: 86-10-6641-0030, 86-10-6641-7751, 86-10-6641-7752 Fax: 86-10-6641-0125 Holtek Semiconductor Inc. (Chengdu Sales Office) 709, Building 3, Champagne Plaza, No.97 Dongda Street, Chengdu, Sichuan, China 610016 Tel: 86-28-6653-6590 Fax: 86-28-6653-6591 Holtek Semiconductor (USA), Inc. (North America Sales Office) 46729 Fremont Blvd., Fremont, CA 94538 Tel: 1-510-252-9880 Fax: 1-510-252-9885 http://www.holtek.com Copyright Ó 2008 by HOLTEK SEMICONDUCTOR INC. The information appearing in this Data Sheet is believed to be accurate at the time of publication. However, Holtek assumes no responsibility arising from the use of the specifications described. The applications mentioned herein are used solely for the purpose of illustration and Holtek makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Holtek¢s products are not authorized for use as critical components in life support devices or systems. Holtek reserves the right to alter its products without prior notification. For the most up-to-date information, please visit our web site at http://www.holtek.com.tw. Rev 1.30 17 September 24, 2008