1N4001G thru 1N4007G General Purpose Plastic Rectifiers Reverse Voltage 50 to 1000V Forward Current 1.0A Feature & Dimensions * Plastic package has Underwriters Laboratories Flammability Classification 94V-0 * Construction utilizes void-free molded plastic technique * Low reverse leakage * High forward surge capability * Glass passivated chip * High temperature soldering guaranteed: 260°C/10 seconds * 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-41, molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 We declare that the material of product compliance Polarity: Color band denotes cathode end with ROHS requirements Mounting Position: Any Weight: 0.011 oz., 0.284 g Handling precaution:None Electrical Characteristic 1.Maximum & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol symbol 1N4 001G 1N4 002G 1N4 003G 1N4 004G 1N4 005G 1N4 006G 1N4 007G Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current 0.375" (9.5mm) lead length at TA = 75°C IF(AV) 1.0 A IFSM 30 A Maximum full load reverse current, full cycle average,0.375"(9.5mm) lead lengths at TA = 75°C IR(AV) 30 µA Typical thermal resistance (Note 1) RθJA 50 °C/W TJ, TSTG –50 to +150 °C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Operating junction and storage temperature range Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current TA = 25°C at rated DC blocking voltage TA = 125°C Typical junction capacitance at 4.0V, 1MHz symbol 1N4 001G 1N4 002G 1N4 003G VF 1N4 004G 1.10 1N4 005G 1N4 006G 1N4 007G Unit V IR 5.0 50 µA CJ 15 PF NOTES: 1. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted 1N4001G thru 1N4007G 2. Characteristic Curves ( TA = 25°C unless otherwise noted ) Fig. 2 – Maximum Non-repetitive Peak Forward Surge Current 1.0 0.5 0.375" (9.5mm) Lead Length 0 25 50 75 100 125 Ambient Temperature, °C 1.0 0.1 TJ = 25°C Pulse width = 300µs 1% Duty Cycle 0.01 Transient thermal impedance(°C/W) 0.001 0.6 100 0.8 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage (V) 40 30 20 10 0 1 1.0 0.1 0.01 0.1 1.0 t,Pulse duration,sec 10 10 Number of Cycles at 60Hz 100 Fig 4. – Typical Reverse Characteristics 100 Tj=150℃ 10 1.0 Tj=125℃ 0.1 Tj=25℃ 0.01 Fig 5. –typical transient thermal impedance 10 TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 150 175 Fig 3. – Typical Instantaneous Forward Characteristics 10 50 Junction Capacitance (pF) Instantaneous Forward Current (A) 0 Average Forward Rectified Current (A) 60 Hz Resistive or Inductive Load Instantaneous Reverse Current (µA) Average Forward Rectified Current (A) Fig. 1 – Forward Current Derating Curve 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig 6. – Typical Junction Capacitance 100 10 1.0 0.1 TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p 1 10 Reverse Voltage (V) 100 1N4001G thru 1N4007G 3. dimension: