66287 TRANSISTOR OUTPUT GULL WING DUAL CHANNEL OPTOCOUPLERS MICROPAC OPTOELECTRONIC PRODUCTS DIVISION 06/06/06 Features: Applications: • • • • • • • • • • High Reliability Hermetic Ceramic package SMT mounting / SOIC-8 footprint Proton Radiation tolerant +1000V electrical isolation Eliminate ground loops Level shifting Line receiver Switching circuits Monitor and Detection circuits DESCRIPTION The 66287 contains 2 proton tolerant LEDs optically coupled to 2 silicon planar phototransistors. The optocoupler is in a hermetic ceramic Gullwing-8 package with a standard SOIC-8 footprint with 0.050” lead spacing. The package eliminates the need for thru-hole mounting and is well suited for high density applications. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage .........................................................................................................................................................1000V Emitter-Collector Voltage ............................................................................................................................................................7V Collector-Emitter Voltage (Value applies to emitter-base open-circuited & the input-diode equal to zero) ............................30V Reverse Input Voltage ...............................................................................................................................................................6V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) .....................................60mA Peak Forward Input Current (Value applies for tw < 1µs, PRR < 300 pps) ...............................................................................1A Continuous Collector Current ..............................................................................................................................................150mA Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) ................................. 150mW Storage Temperature.......................................................................................................................................... -65°C to +150°C Operating Free-Air Temperature Range.............................................................................................................. -55°C to +125°C Lead Solder Temperature (10 seconds max.) .....................................................................................................................240°C Notes: 1. Derate linearly above +65°C free-air temperature at the rate of 1.15 mA/°C. 2. Derate linearly above +25°C free-air temperature at the rate of 1.76 mW/°C. Package Dimensions PIN 1 MARK Schematic Diagram 0.180 MAX. A1 1 8 C1 K1 2 7 E1 A2 3 6 C2 K2 4 5 E2 0.150 8X 0.015±0.002 6X 0.050 TYP. 0.005±0.002 0.070 MAX. 0.005 MAX. GULLWING 8 LEAD PACKAGE ALL DIMENSIONS ARE IN INCHES MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 66287 TRANSISTOR OUTPUT GULL WING DUAL CHANNEL OPTOCOUPLER 06/06/06 ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS Input Diode Static Reverse Current IR 100 µA VR = 6V Input Diode Static Forward Voltage VF 1.3 V IF = 1.0mA V IR = 10µA Reverse Breakdown Voltage BVR 5 Peak Wavelength λp 850 nm IF = 1.0mA Input Diode Capacitance CIN 18 PF V = 0V, f = 1MHz UNITS TEST CONDITIONS OUTPUT TRANSISTOR TA = 25°C unless otherwise specified. PARAMETER SYMBOL MIN TYP MAX Collector-Emitter Breakdown Voltage V(BR)CEO 30 V IC = 1mA, IB = 0, IF = 0 Emitter-Collector Breakdown Voltage V(BR)ECO 7 V IC = 10µA Collector-Emitter Dark Current ICEO1 50 nA VCE = 10V, IF = 0mA Collector-Emitter Dark Current +1000 C ICEO2 1 µA VCE = 10V, TA=+1000 C MAX UNITS TEST CONDITIONS mA VCE = 5V, IF = 1.0mA V IF = 1.0mA, IC = 100µA Ω VIN-OUT = 500V COUPLED CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER On State Collector Current Collector-Emitter Saturation Voltage SYMBOL MIN IC(ON) 1 TYP 0.4 VCE(SAT) 11 Isolation Resistance RISO Input to Output Capacitance CIO 0.2 pF Turn-on Time Ton 7.0 µs VCE = 5V, IF = 2mA, RL = 100Ω Turn-off Time Toff 5.5 µs VCE = 5V, IF = 2mA, RL = 100Ω Rise Time tr 3.0 µs VCE = 10V, IF = 2mA, RL = 100Ω Fall Time tf 4.5 µs VCE = 10V, IF = 2mA, RL = 100Ω 10 TEST CIRCUIT VIN-OUT = 0V f = 1MHz WAVE FORMS Vcc = +10 V RL IC IF OUTPUT INPUT PULSE INPUT 90% OUTPUT PULSE R1 10% tr Adjust IF to produce I C = 2 mA t on tf t off Switching Time Test Circuit and Waveforms MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 66287 TRANSISTOR OUTPUT GULL WING DUAL CHANNEL OPTOCOUPLER 06/06/06 RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX Input Current, Low Level IFL 0 1 µA Input Current, High Level IFH 1 20 mA Supply Voltage VCE 5 30 V TA -55 100 °C Operating Temperature UNITS SELECTION GUIDE PART NUMBER PART DESCRIPTION 66287-001 Dual Channel optocoupler, commercial 66287-101 Dual Channel optocoupler –55 to +100°C Screened MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM