RENESAS 2SA1741

To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
DATA SHEET
SILICON POWER TRANSISTOR
2SA1741
PNP SILICON EPITAXIAL TRANSISTOR
FOR HIGH-SPEED SWITCHING
The 2SA1741 is a power transistor developed for high-speed
PACKAGE DRAWING (UNIT: mm)
switching and features a high hFE at low VCE(sat). This transistor is
ideal for use as a driver in DC/DC converters and actuators.
In addition, a small resin-molded insulation type package
contributes to high-density mounting and reduction of mounting
cost.
FEATURES
• High hFE and low VCE(sat):
hFE ≥ 100 (VCE = −2 V, IC = −1 A)
VCE(sat) ≤ 0.3 V (IC = −3 A, IB = −0.15 A)
• Full-mold package that does not require an insulating board or
bushing when mounting.
Electrode Connection
1. Base
2. Collector
3. Emitter
.
ABSOLUTE MAXIMUM RATINGS (Ta = 25°°C)
Parameter
Symbol
Ratings
Unit
Collector to base voltage
VCBO
−100
V
Collector to emitter voltage
VCEO
−60
V
Emitter to base voltage
VEBO
−7.0
V
Collector current (DC)
IC(DC)
−5.0
A
IC(pulse)*
−10
A
IB(DC)
−2.5
A
Total power dissipation
PT (Tc = 25°C)
25
W
Total power dissipation
PT (Ta = 25°C)
2.0
W
Junction temperature
Tj
150
°C
Storage temperature
Tstg
−55 to +150
°C
Collector current (pulse)
Base current (DC)
* PW ≤ 300 µs, duty cycle ≤ 50%
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. D16125EJ1V0DS00 (1st edition)
Date Published April 2002 N CP(K)
Printed in Japan
©
2002
2SA1741
ELECTRICAL CHARACTERISTICS (Ta = 25°°C)
Parameter
Symbol
Conditions
Collector to emitter voltage
VCEO(SUS)
IC = −3.0 A, IB = −0.3 A, L = 1 mH
Collector to emitter voltage
VCEX(SUS)
IC = −3.0 A, IB1 = −IB2 = −0.3 A,
VBE(OFF) = 1.5 V, L = 180 µH, clamped
MIN.
TYP.
MAX.
V
−60
V
Collector cutoff current
ICBO
VCB = −60 V, IE = 0
−10
µA
Collector cutoff current
ICER
VCE = −60 V, RBE = 50 Ω, Ta = 125°C
−1.0
mA
Collector cutoff current
ICEX1
VCE = −60 V, VBE(OFF) = 1.5 V
−10
µA
Collector cutoff current
ICEX2
VCE = −60 V, VBE(OFF) = 1.5 V,
Ta = 125 °C
−1.0
mA
Emitter cutoff current
IEBO
VEB = −5.0 V, IC = 0
−10
µA
DC current gain
hFE1*
VCE = −2.0 V, IC = −0.5 A
100
DC current gain
hFE2*
VCE = −2.0 V, IC = −1.0 A
100
DC current gain
hFE3*
VCE = −2.0 V, IC = −3.0 A
60
Collector saturation voltage
VCE(sat)1*
IC = −3.0 A, IB = −0.15 A
−0.3
V
Collector saturation voltage
VCE(sat)2*
IC = −4.0 A, IB = −0.2 A
−0.5
V
Base saturation voltage
VBE(sat)1*
IC = −3.0 A, IB = −0.15 A
−1.2
V
Base saturation voltage
VBE(sat)2*
IC = −4.0 A, IB = −0.2 A
−1.5
V
Collector capacitance
Cob
400
VCB = −10 V, IE = 0, f = 1.0 MHz
130
pF
80
MHz
Gain bandwidth product
fT
VCE = −10 V, IC = −0.5 A
Turn-on time
ton
Storage time
tstg
IC = −3.0 A, RL = 17 Ω,
IB1 = −IB2 = −0.15 A, VCC ≅ −50 V
Refer to the test circuit.
Fall time
tf
0.3
µs
1.5
µs
0.3
µs
* Pulse test PW ≤ 350 µs, duty cycle ≤ 2%
hFE CLASSIFICATION
Marking
M
L
K
hFE2
100 to 200
150 to 300
200 to 400
IC Derating dT (%)
Total Power Dissipation PT (W)
TYPICAL CHARACTERISTICS (Ta = 25°°C)
Case Temperature TC (°C)
Case Temperature TC (°C)
2
Unit
−60
Data Sheet D16125EJ1V0DS
2SA1741
Collector Current IC (A)
Collector Current IC (A)
Single pulse
Collector to Emitter Voltage VCE (V)
Transient Thermal Resistance Rth
Collector to Emitter Voltage VCE (V)
Without heatsink
With infinite heatsink
Collector Current IC (A)
Collector Current IC (A)
Pulse Width (s)
Collector to Emitter Voltage VCE (V)
Data Sheet D16125EJ1V0DS
Collector to Emitter Voltage VCE (V)
3
2SA1741
Pulse test
DC Current Gain hFE
Collector Current IC (A)
Pulse test
Single pulse
Collector Current IC (A)
Base to Emitter Voltage VBE (V)
DC Current Gain hFE
Pulse test
Collector Saturation Voltage VCE(sat) (V)
Pulse test
Collector Current IC (A)
Base Saturation Voltage VBE(sat) (V)
Pulse test
Gain Bandwidth Product fT (MHz)
Collector Current IC (A)
Collector Current IC (A)
4
Pulse test
Collector Current IC (A)
Data Sheet D16125EJ1V0DS
2SA1741
6WRUDJH7LPHWVWJµV
)DOO7LPHWIµV
&ROOHFWRU&DSDFLWDQFH&RES)
5HIHUWRWKHWHVWFLUFXLW
&ROOHFWRUWR%DVH9ROWDJH9&%9
&ROOHFWRU&XUUHQW,&$
SWITCHING TIME (ton, tstg, tf) TEST CIRCUIT
Base current
waveform
Collector current
waveform
Data Sheet D16125EJ1V0DS
5
2SA1741
• The information in this document is current as of July, 2001. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
• NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
• While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
• NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4