COMPACT UV-VIS FIBER LIGHT SOURCE NEW S2D2 (UV Enhanced Type) L12515 OVERVIEW The L12515 is a UV-visible fiber light source containing the world’s smallest* compact deuterium lamp (S2D2 lamp). Compared to conventional S2D2 lamps, the L12515 gives a higher S/N ratio by enhancing the light output in the UV region. Despite a small and easy-to-carry size, the L12515 delivers high output, high stability, and low voltage operation, making it ideal for assembly into compact chemical analysis devices. * As of September 2013 by our research * Light guide is sold separately. FEATURES ●200 nm to 220 nm (enlarged view of enhanced output region) 1.4 L12515 L10671 (conventional type) 1.2 ●200 nm to 1100 nm 1 TLSZB0125EA 0.8 10 3 0.6 L12515 L10671 (conventional type) Times 0.4 LIGHT GUIDE A7969-08AS CORE DIAMETER= 0.8 mm 0.2 0 200 202 204 206 208 212 214 216 218 220 1 0.1 LIGHT GUIDE A7969-08AS CORE DIAMETER= 0.8 mm APPLICATIONS 0.01 200 300 400 500 600 700 800 900 1000 WAVELENGTH (nm) ●at 230 nm ●at 600 nm ABSORBANCE (10-5 A.U.) LIGHT OUTPUT STABILITY ABSORBANCE (10-5 A.U.) ●Spectrophotometry ●Environmental Measurement ●Absorption Spectrum Measurement ●Pharmaceutical Testing ●High-Performance Liquid Chromatography ●Film Thickness Measurement ●Biological Measurement ●Semiconductor Inspection ●Optical Component Inspection 210 WAVELENGTH (nm) RELATIVE IRRADIANCE RELATIVE IRRADIANCE ●Compact: 74 mm × 40 mm × 110 mm ●High Stability: Fluctuation 0.004 %p-p (Typ.) (equivalent to 2 × 10-5 A.U.) ●Long Service Life: 1500 hours guaranteed (compact deuterium lamp) ●Improved S/N Ratio Due to Enhanced Output in the UV Region ●External Control ●Shutter Function SPECTRAL DISTRIBUTION (TYPICAL DATA) 20 15 10 5 0 -5 -10 -15 -20 TIME (100 s/div.) 20 15 10 5 0 -5 -10 -15 -20 TIME (100 s/div.) TLSOB0107EA 1100 SPECIFICATIONS REPLACEMENT LAMP Lamp Lamp service life 4 Compact Deuterium Lamp 1500 h Tungsten Lamp 1000 h Type No. L10671D L10671W Description / Value 200 nm to 1600 nm Compact Deuterium Lamp Built-in Lamps Tungsten Lamp 3 Output Fluctuation (Typ.) 0.004 %p-p (Equivalent to 2 × 10-5 A.U.) ±0.25 %/h Stability Drift (Max.) 100 V to 240 V (50 Hz/60Hz) Input Voltage (AC) 12 10 VA Power Consumption 1 230 g Weight SMA905D Light Guide Connector Provided as Standard Shutter Lamp ON / OFF Shutter Open / Close External Control Lamp ON/OFF, Main Power ON/OFF, Status Signal Main Unit Switch Shutter Open / Close 0 °C to +40 °C Operating Ambient Temperature Below 80 % Operating Ambient Humidity -10 °C to +60 °C Storage Temperature Below 85 % Storage Humidity Parameter Spectral Distribution NOTE: 4Guaranteed service life. Defined as the time when the radiant intensity falls to 50 % of its initial value or the radiant output fluctuation exceeds 0.05 %. LIGHT GUIDE (sold separately) Type No. A7969-02AS 5 A7969-06AS 5 A7969-08AS 5 Length Core Diameter 0.2 mm 0.6 mm 0.8 mm 1.0 m NOTE: 5UV-resistant light guide UV RESISTANT CHARACTERISTICS (at 215 nm) 120 TLSOB0094ED TRANSMITTANCE (%) 100 NOTE: 1When used with AC adapter (supplied). 2Input voltage to light source unit is 12 V dc (8.5 V dc to 13.2 V dc). 3Tungsten lamp light intensity can be adjusted in the range from 20 % to 100 %. A7969-02AS A7969-06AS A7969-08AS 80 60 40 STANDARD TYPE 20 0 0 50 100 150 200 250 300 350 400 450 OPERATION TIME (h) DIMENSIONAL OUTLINES (Unit: mm) ACCESSORIES (Supplied) 110 LIGHT GUIDE CONNECTOR (SMA905D) ●AC Adapter ●External Control Cable ●Instruction Manual 74 COOLING FAN TUNGSTEN LAMP LIGHT INTENSITY ADJUSTMENT TRIMMER TOP VIEW 40 INDICATOR UPPER: MAIN POWER LOWER: SHUTTER OPEN/CLOSE EXTERNAL CONTROL TERMINALS PINOUT SHUTTER SWITCH POWER CONNECTOR EXTERNAL CONTROL TERMINAL POWER SHUTTER SHUTTER FRONT VIEW SIDE VIEW REAR VIEW Pin No. 1 2 3 4 5 6 7 8 Signal Name Deuterium lamp ON/OFF Tungsten lamp ON/OFF Shutter open/close Deuterium lamp status signal Tungsten lamp status signal No connection Main power ON/OFF status signal GND TLSZA0037EA Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2013 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Thorshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] TLSZ1022E01 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected] China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, 27 Dongsanhuan Road North, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected] OCT. 2013 IP