InGaAs PIN photodiodes G8195 series Pigtail type, 1.3/1.55 μm, 2 GHz The G8195 series are high-speed receivers specifically developed for 1.3/1.55 μm band power monitor in optical fiber communications. These devices incorporate a high-speed, high-sensitivity InGaAs PIN photodiode integrated in a pigtail module. Features Applications High-speed response: 2 GHz typ. Power monitor in optical fiber communications Low dark current: 20 pA typ. High sensitivity: 0.9 A/W typ. (λ=1.31 μm) Low capacitance: 1 pF typ. Absolute maximum ratings (Ta=25 °C) Parameter Reverse voltage Operating temperature Storage temperature Symbol VR max Topr Tstg Value 20 -20 to +70 -40 to +85 Unit V °C °C Electrical and optical characteristics (Ta=25 °C) Parameter Spectral response range Peak sensitivity wavelength Symbol λ λp Condition λ=1.3 μm λ=1.55 µm Dark current ID VR=5 V VR=5 V, RL=50 Ω Cutoff frequency fc λ=1.3 μm, -3 dB Terminal capacitance Ct VR=5 V, f=1 MHz Noise equivalent power NEP VR=5 V, λ=1.55 µm * Using a single mode opticul fiber with a master plug Photo sensitivity S* Min. 0.75 0.8 - Typ. 0.9 to 1.7 1.55 0.9 0.95 0.02 Max. 0.4 Unit μm μm A/W A/W nA - 2 - GHz - 1 3 × 10-15 1.5 - pF W/Hz1/2 Package lineup Configuration Mount type Fiber Connector G8195-11 G8195-12 Coaxial SM (9.5/125) φ0.9 mm, 1 m +20 cm/-0 cm SC www.hamamatsu.com FC 1 InGaAs PIN photodiodes G8195 series Dimensional outline (unit: mm, tolerance unless otherwise noted: ±0.2) Mount type Pin connections (22.8) 0.45 ± 0.1 Lead ( 2.54) 7.0 6.1 (11) 7.8 Pin no. G8195 series Anode Cathode Case Index mark KIRDA0112EA Connector (1) SC (2) FC JIS C5970 FC/SPC connector JIS C5973 SC/SPC connector KIRDA0102EA KIRDA0103EA Information described in this material is current as of November, 2011. Product specifications are subject to change without prior notice due to improvements or other reasons. Before assembly into final products, please contact us for the delivery specification sheet to check the latest information. Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or a suffix "(Z)" which means developmental specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Cat. No. KIRD1034E03 Nov. 2011 DN 2