KL32 1210 molded wirewound inductor EU features UL94V0 molded epoxy case Operating temperature: -40°C ~ +100°C 1210 size - surface mount style High Q value achieved by wirewound structure Marking: Black body color with white marking Products with lead-free terminations meet EU RoHS requirements • AEC-Q200 Qualified dimensions and construction Type KL32 L d Magnet Wire W2 10µH - 330µH Electrode KL 32 Type Size 1210 size T Termination Material T: Sn For further information on packaging, please refer to Appendix A. applications and ratings Part Designation KL32TTE005* KL32TTE010* KL32TTE012* KL32TTE015* KL32TTE018* KL32TTE022* KL32TTE027* KL32TTE033* KL32TTE039* KL32TTE047* KL32TTE056* KL32TTE068* KL32TTE082* KL32TTER10* Nominal Inductance (µH) 0.005 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 Inductance Tolerance M: ±20% K: ±10% M: ±20% Quality Factor Minimum 11 15 17 19 21 23 25 J: ±5% K: ±10% M: ±20% 26 27 28 h d .126±.008 .098±.008 .067±.004 .087±.008 .075±.004 .02 nominal (3.2±0.2) (2.5±0.2) (1.7±0.1) (2.2±0.2) (1.9±0.1) (.5 nominal) 0.10µH - 8.2µH ordering information New Part # Dimensions inches (mm) t W2 Value 0.005µH - 0.082µH h Ferrite Core Molded Resin W1 Inductance Marking W1 t L TE Packaging TE: 7" embossed plastic TED: 10" embossed plastic (TE: 2,000 pieces/reel) (TED: 4,000 pieces/reel Self Resonant Frequency Minimum (MHz) 2700 2500 2300 2100 1900 1700 1500 1400 1300 1200 1100 1000 900 700 DC Resistance Maximum (Ω) 0.12 0.13 0.14 0.16 0.18 0.20 0.22 0.24 0.27 0.30 0.33 0.36 0.40 0.44 Code 005 - 082 R10 - 8R2 R indicates decimal point. 100 - 331 1st two figures are significant, the last figure indicates the number of zeros to follow. 101 Nominal Inductance Reference inductance marking chart J Tolerance J: ±5% K: ±10% M:±20% Allowable DC Current Maximum (mA) Measured Frequency (MHz) 450 100 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/21/14 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 229 inductors • • • • • • KL32 1210 molded wirewound inductor applications and ratings (continued) Part Designation Nominal Inductance (µH) inductors KL32TTER12* 0.12 KL32TTER15* 0.15 KL32TTER18* 0.18 KL32TTER22* 0.22 KL32TTER27* 0.27 KL32TTER33* 0.33 KL32TTER39* 0.39 KL32TTER47* 0.47 KL32TTER56* 0.56 KL32TTER68* 0.68 KL32TTER82* 0.82 KL32TTE1R0* 1.0 KL32TTE1R2* 1.2 KL32TTE1R5* 1.5 KL32TTE1R8* 1.8 KL32TTE2R2* 2.2 KL32TTE2R7* 2.7 KL32TTE3R3* 3.3 KL32TTE3R9* 3.9 KL32TTE4R7* 4.7 KL32TTE5R6* 5.6 KL32TTE6R8* 6.8 KL32TTE8R2* 8.2 KL32TTE100* 10 KL32TTE120* 12 KL32TTE150* 15 KL32TTE180* 18 KL32TTE220* 22 KL32TTE270* 27 KL32TTE330* 33 KL32TTE390* 39 KL32TTE470* 47 KL32TTE560* 56 KL32TTE680* 68 KL32TTE820* 82 KL32TTE101* 100 KL32TTE121* 120 KL32TTE151* 150 KL32TTE181* 180 KL32TTE221* 220 KL32TTE271* 270 KL32TTE331* 330 * Add tolerance character (J, K, M) The operating temperature range of the Inductance Tolerance Quality Factor Minimum J: ±5% K: ±10% M: ±20% 30 J: ±5% K: ±10% M: ±20% Self Resonant Frequency Minimum (MHz) 500 450 400 350 320 300 250 220 180 160 140 120 100 85 80 75 70 60 55 50 47 43 40 36 33 30 27 25 20 17 16 15 13 12 11 10 8 20 7 6 5 DC Resistance Maximum (Ω) 0.22 0.25 0.28 0.32 0.36 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.85 0.90 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.1 2.5 2.8 3.3 3.7 5.0 5.6 6.4 7.0 8.0 9.0 Measured Frequency (MHz) 450 25.2 400 390 370 350 320 290 260 250 220 200 180 170 150 140 130 120 110 80 70 65 60 55 50 45 40 70 65 60 10 11 15 17 21 28 34 2.52 0.796 50 Requirements Maximum ∆ L/L ∆ Q/Q Limit Typical Test Method Resistance to Soldering Heat ∆ L/L: ±3% ∆ L/L: ±1.5% 260°C ± 5°C, 10s ± 1s Heat Shock ∆ L/L: ±5% ∆ L/L: ±1.1% -25°C (1 hour)/ +100°C (1 hour) 100 cycles Low Temperature Operation ∆ L/L: ±5%, ∆ Q/Q: ±20% High Temperature Exposure ∆ L/L: ±5%, ∆ Q/Q: ±30% Moisture Exposure ∆ L/L: ±5%, ∆ Q/Q: ±30% Resistance to Solvent 7.96 coil (ambient temperature + self heating) must remain at +125°C or less Performance Characteristics Parameter Allowable DC Current Maximum (mA) No damage and marking shall be legible ∆ L/L: ±0.9% -40°C ± 2°C, 1000h ∆ Q/Q: ±5.0% ∆ L/L: ±0.8% 100°C ± 2°C, 1000h ∆ Q/Q: ±5.0% ∆ L/L: ±1.3% 40°C ± 2°C, 90%~95%RH, 1000h ∆ Q/Q: ±5.2% — Accordance with MIL-STD-202F Method 215 For complete environmental specifications, please refer to www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 230 12/01/14 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com