resistors CN concave termination with square corners resistor array EU features • • • • Manufactured to type RK73 standards Less board space than individual chips Isolated resistor elements Marking: Marked with resistance value 1E, no marking • Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. • AEC-Q200 Qualified: CN1J4 only dimensions and construction L a p b W t a d Protective Coating Electrode C Resistive Film Ceramic Substrate Inner Electrode L CN 1J 4 Type Size Elements 1E 1J 2A 2B 2 4 8 For further information on packaging, please refer to Appendix A. W .039±.004 (0402x2) (1.0±0.1) .039±.004 1E4 .079±.004 (1.0±0.1) (0402x4) (2.0±0.1) 1J2 .063±.008 (0603x2) (1.6±0.2) 1J4 .126±.008 .063±.008 (0603x4) (3.2±0.2) (1.6±0.2) 1J8 .252±.008 (0603x8) (6.4±0.2) 2A2 0.1±.008 (0805x2) (2.54±0.2) 2A4 0.2±.008 .079±.008 (0805x4) (5.08±0.2) (2.0±0.2) 2A8 0.4±.008 (0805x8) (10.16±0.2) 2B2 0.1±.008 (1206x2) (2.54±0.2) 2B4 0.2±.008 .126±.008 (1206x4) (5.08±0.2) (3.2±0.2) 2B8 0.4±.008 (1206x8) (10.16±0.2) ordering information New Part # Size Code 1E2 T C Dimensions inches (mm) d t a (top) a (bot.) b .014±.004 .008±.004 .010±.004 (0.35±0.1) .012±.004 .012±.006 .003±.002 (0.2±0.1) (0.25±0.1) .018±.004 (0.3±0.1) (0.3±0.1) (0.07±0.05) (0.45±0.1) .012±.008 .016±.004 (0.3±0.2) (0.4±0.1) .016±.008 (0.4±0.2) .020±.004 .016±.006 (0.5±0.1) (0.4±0.15) .031 (0.8) .031±.004 .030±.006 (0.8±0.1) (0.75±0.15) .050 (1.27) .020±.012 (0.5±0.3) Termination Material T: Sn (Other termination styles may be available, please contact factory for options) TD Packaging TE: 7" embossed plastic TD: 7" paper tape TED: 10" embossed plastic TDD: 10" paper tape 101 Nominal Resistance 2 significant figures + 1 multiplier for ±2 & ±5% 3 significant figures + 1 multiplier for ±1% Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 82 .020 (0.5) .006±.004 (0.15±0.1) .024±.004 (0.6±0.1) .022±.004 (0.55±0.1) p (ref.) J Tolerance F: ±1% G: ±2% J: ±5% 11/30/14 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com concave termination with square corners resistor array circuit schematic CN1E2, CN1J2, CN2A2, CN2B2 CN1E4, CN1J4, CN2A4, CN2B4 R1 R2 CN1J8, CN2A8, CN2B8 R1 R2 R3 R4 R1 = R2 = R3 = R4 R1 = R2 R1 R2 R3 R4 R5 R6 R7 R8 R1 = R2 = R3 = R4 = R5 = R6 = R7 = R8 applications and ratings Part Designation CN1E2 CN1E4 CN1J2 CN1J4 CN1J8 CN2A2 CN2A4 CN2A8 CN2B2 CN2B4 CN2B8 Power Rating @ 70°C (Per Element) 1/16W (.063W) 1/16W (.063W) 1/10W (.100W) 1/8W (.125W) T.C.R. (ppm/°C) Max. F:±1% ––– ±100: R≥10Ω ±200: R≥10Ω ––– ±200: R≥10Ω ––– J:±5%, G:±2% Resistance Range (Ω) Absolute Maximum Maximum Overload Working Voltage Voltage (5 Secs. Max.) E-24, E-96 (F:±1%) E-24 (G:±2%) E-24 (J:±5%) ––– ––– 10 - 100k 25V 50V 10 - 1M 1 - 1M 50V 100V ±200: R≥10Ω ±400: R<10Ω 10 - 1M 10 - 1M 10 - 1M ––– 100V 200V 200V 400V Rated Ambient Temp. Operating Temp. Range +70°C -55°C to +125°C 10 - 1M 10 - 1M ––– * Note that network resistors generate higher heat rather than single flat chip resistor under rated power output. environmental applications Derating Curve Circuit Board Application 100 Vcc % Rated Power 80 60 40 IC IC 20 0 0 20 40 60 80 100 120 140 70 125 Ambient Temperature (°C) 160 For resistors operated at an ambient temperature of 70°C or above, a power rating shall be derated in accordance with the above derating curve. Performance Characteristics Parameter Resistance T.C.R. Overload (Short time) Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Endurance at 70°C High Temperature Exposure Requirement ∆ R ±% Limit Typical Within specified — tolerance Within specified — T.C.R. ±2.0% ±0.5% ±1.0% ±0.25% ±1.0% ±0.5% ±5.0% ±1.0% ±5.0% ±0.5% ±1.0% ±0.2% Test Method 25°C +25°C/-55°C, +25°C/+125°C Rated voltage x 2.5 for 5 seconds 260°C ± 5°C, 10 seconds ± 1 second -55°C (30 minutes), +125°C (30 minutes), 5 cycles 40°C ± 2°C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle +125°C, 1000 hours Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/18/14 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 83 resistors CN