KOA SPEER ELECTRONICS, INC. SS-208 R7 AHA 4/15/14 Chip Networks Resistors Type CN_A CERTIFIED CERTIFIED 1. Features Manufactured to type RK73 standards Less board space than individual chips Isolated resistor elements Convex terminations with scalloped corners Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. ■ AEC-Q200 Qualified: CN1J4A only ■ ■ ■ ■ ■ 2. Dimensions L a Size Code p L b W C t C Dimensions inches (mm) d t a p (ref.) b 1J4A .126±.006 .063±.006 .012±.008 .010±.004 .020±.004 .020±.006 .012±.004 (3.2±0.15) (1.6±0.15) (0.3±0.2) (0.25±0.1) (0.5±0.1) (0.5±0.15) (0.3±0.1) .031 (0.8) 2B4A 0.2±.008 .122±.008 .020±.008 .014±.006 .022±.004 .031±.008 .018±.004 (5.1±0.2) (3.1±0.2) (0.5±0.2) (0.35±0.15) (0.55±0.1) (0.8±0.2) (0.45±0.1) .050 (1.27) d Protective Coating W Resistive Film Electrode Ceramic Substrate CN___A Convex/Scalloped Corner R1 R2 R3 R4 CN___A 3. Type Designation The type designation shall be the following form: CN 1J 4 A T TD 101 J Type Size Elements Terminal Convex Termination Material Packaging Nominal Resistance Tolerance T: Sn (Other termination styles maybe available, please contact factory for options) TE: 7" embossed plastic TD: 7" paper tape TED: 10" embpssed plastic TDD: 10" paper tape 2 significant figures + 1 multiplier for ±2% & ±5% 3 significant figures + 1 multiplier for ±1% F: ±1% J: ±5% 1J 2B PAGE 1 OF 4 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-208 R7 4. Standard Applications Part Designation Power Rating @ 70°C (Per Element) T.C.R. (ppm/°C) Max. CN1J4A 1/16W (.063W) CN2B4A 1/8W (.125W) ±200:R≥10Ω ±400:R<10Ω Resistance Range E-96 (F±1%) Resistance Range E-24 (J±5%) Absolute Maximum Working Voltage Absolute Maximum Overload Voltage 10 - 100kΩ 1Ω - 1MΩ 50V 100V ––– 10Ω - 1MΩ 200V 400V Operating Temperature Range -55°C to +125°C 5. Environmental Applications For temperature in excess of 70°C, the load shall be derated in accordance with the following figure. Derating Curve 100 % Rated Power 80 60 40 20 0 0 70 -55 125 Ambient Temperature (°C) 5.1 Voltage Rating Resistors shall have a rated direct current (DC) continuous working voltage or approximate sine wave root mean square (R.M.S.) continuous working voltage at commercial line frequency and wave form corresponding the power rating as determined from the following formula: Where, E =√ P x R E = Rated voltage (V) P = Power rating (W) R = Nominal resistance (Ω) However, if the rated voltage thus obtained surpasses the specified maximum working voltage, it shall be considered the rated voltage. PAGE 2 OF 4 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-208 R7 6. Body Color and Marking 103 CN_A: Body Color: Black Marking Color: White Nominal resistance at 3-digit numbers 3-digit numbers The first and the second numbers shall be shown 2 effective numbers, and the third number shall be shown a multiple of 10. Example: 103 10,000 10k 472 4,700 4.7k 1 0 3 7. Performance Parameter Resistance T.C.R. Overload (Short time) Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Endurance at 70°C High Temperature Exposure Requirement ∆ R ±% Limit Typical Within specified — tolerance Within specified — T.C.R. ±2.0% ±0.5% ±1.0% ±0.2% ±1.0% ±0.1% ±5.0% ±1.0% ±5.0% ±0.5% ±1.0% ±0.2% Test Method 25°C +25°C/-55°C, +25°C/+125°C Rated voltage x 2.5 for 5 seconds 260°C ± 5°C, 10 seconds ± 1 second -55°C (30 minutes), +125°C (30 minutes), 5 cycles 40°C ± 2°C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle +125°C, 100 hours PAGE 3 OF 4 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-208 R7 8. Taping Tape material Paper Tape material and quantity/reel Tape width .315 in. (8 mm) Quantity/Reel (pcs.) 5,000 9. Packaging Specifications 9.1 Paper Tape Dimensions Component Size (mm) Type W T 3.20 1.6 0.6/0.5 CN_A 5.08 3.2 0.6 1.5 +0.1 -0 B W P1 TD 5000 3.5±0.1 2.0±0.1 8.0±0.2 4.0±0.1 TDD 10000 1.9±0.1 1.1±0.1 8.0±0.2 4.0±0.1 TE TED 4000 10000 5.4±0.2 5.4±0.2 3.4±0.2 3.4±0.2 12.0±0.1 12.0±0.1 4.0±0.1 4.0±0.1 Carrier Tape 0.75+0.2/-0/ 0.6+0.2/-0 0.75+0.2/-0/ 0.6+0.2/-0 1±0.15 1±0.15 178 255 178 255 1.75±0.1 Reel (mm) Central hole ø13 A B Reel Size T1 øa 2B4 A W 1J4A L Taping (mm) Quantity/ Reel (Pieces) Carrier Tape ød e P1 (TP) 2.0 4.0±0.1 P1 T1 T1 T1 Type All Direction of feed (Notes) Dotted lines are applicable to only “TP” and “TB.” ød (mm) e (mm) 21 2 (Notes) Reel holes, shapes and design are examples 10. Reel Marking Lot Number The reel must be marked as follows: (1) Type designation (2) Nominal inductance (3) Quantity (4) Production lot number (5) Manufacturer’s name 41~52 (6) Customer’s code number (7) Order number 53~64 53 11 8 001 Production year/month Date Factory Continuous number January 2006 ~ December 2006 8 KOA January 2007 ~ December 2007 PAGE 4 OF 4 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.