VCXO2E family package 5×3.2 mm T range up to 210°C 5 to 40MHz DIMENSIONS Recommended Solder Pad: 1.5 5.00 1.5 1 1.6 2.7 3 1 2 1 2.35 4 1.6 Package: Bottom view 1.6 1 2 4 3 pin 1 VC pin 2 GND pin 3 Fout pin 4 Vdd 3.20 All dimensions in mm typical 100% Leadfree, RoHScompliant: SMT Voltage control oscillator in ceramic package Fundamental quartz mode frequency High shock and vibration resistance Wide temperature range Low aging Ultra low MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request ELECTRICAL CHARACTERISTICS AT +25°C DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. Applications: - Downhole and Well drilling equipments -Avionics - Airbone equipments - Geothermal equipments - Fire fighter equipments The VCXO2E's are supplied on trays (128 pcs / tray) For pick-and-place equipment, the parts are available in 12mm tapes with 250 parts min 1000 parts min Absolute Frequency Pulling range APR (Minimum frequency deviation including 2)* Tempperature range B= -40 to 85°C C= -55 to 125°C E= -10 to 150°C D= -10 to 175°C G= -10 to 210°C Supply voltage ± 5% Input current 1)* ≤ ± 130 ≤ ± 110 ≤ ± 90 ≤ ± 50 ≤ ± 30 Vdd 3.3 Idd see table 1 Output signal Rise & fall time (load 15pf 20% to 80%) Level "0" & "1" Start-up time V HC-MOS compatible Symmetry at Vdd/2 Load min / max ppm ΔF/F t 40 / 60 % ≤5 ns <0.4>Vdvd-0.5 V <5 ms 3/47 pF * 1) C = 47nF ceramic must be connected between GND & Vdd * 2)APR is inclusive of frequency deviation due to stability adjustment at +25°C, long term aging 1 year over supply voltage ±5% over load min to max frequency stability over T range Table 1: Idd Frequency F=< 10MHz ≤ 20MHz 40MHz V=Vdd = 3.3V < 4mA < 5mA < 20mA (Without load) FREQUENCY CONTROLE RANGE: Vc (Voltage control range) 0 to 3.3V Response Slope positive frequency bandwich ≤10kHz Input impedance ≥100kohm STANDARD FREQUENCIES: Frequency «MHz» 10 12.288 12.8 24 24.576 25.6 20 Other frequencies on request ENVIRONMENTAL CHARACTERISTICS: Storage temp. range -55 to +125°C Vibration resistance 10 to 2000Hz / 40g Shocks resistance 10000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: PRODUCT DESCRIPTION AND ORDERING INFORMATION: Reflow soldering 260°C / 10s max Package Ceramic 5 x 3.2 x 1.6mm Lids Ceramic Terminations option T3 on request (not available on G temperature range) with tinned Ag/Cu/Zn VCXO2E V = Vdd 3.3V B C E D G X = -40 to 85°C = -55 to 125°C = -10 to 150°C = -10 to 175°C = -10 to 210°C = custom V - D 20MHz T3 XXX option 2 blank Au plasted T3 = tinned customer spec N° Frequency A unique part number will be generated for each product specification 20xxxx-EA00 xxx pcs (in ESD plastic tray) 200xxx-ML00 xxx pcs (in tape & reel, any quantity) All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 2.0/08.2015