OCXOS Sine wave output family package DIL 14 from 10 to 54MHz DIMENSIONS Pin out Pin 1 = Voltage control Pin 8 = GND Pin 8 = Fout Pin 14 = Vdd Package: 6.35 0.8 7.8 20.20 0.46 15.24 7 14 8 7.62 1 12.52 5.35 10.7 All dimensions in mm typical RoHScompliant: Oven control quartz crystal oscillator Fundamental mode frequency High shock and vibration resistance Wide temperature range Low aging Customer specification on request Very fast warm up Low power consumption Swiss made quality DESCRIPTION: This DIL 14 package has been specially designed for the applications: - Digital switching - Telecom transmission - Sonet / SDH / DWDM / FDM/36 / WIMAX - Airbone equipments -Instrumentation - Radio Transceiver - Battery operated systems The OCXO are supplied on trays (50 pcs/tray). ELECTRICAL CHARACTERISTICS AT 25°C Frequency versus temperature A: 0 to +60°C B: -20 to +70°C C: -40 to +85°C ΔF/F Frequency long term aging long term aging 10 years long term aging 1st year ΔF/F <±3 ≤ ± 0.5 ppm Vc ≥ ± 3 (see table 3) ppm Supply voltage Vdd 3.3 / 5 / 12 V Input current Idd see table 2 1) Frequency control range see table 1 (without air flow) Output signal sine wave Start-up time Frequency stability versus load Warm-up within ± 0.1 ppm at 25°C see table 4 t <5 ΔF/F ms ≤ ± 10 ppb Vdd 3.3 5 12 V t ≤ 120 ≤ 60 ≤ 30 s Stability versus Vdd ΔF/F ≤ ± 0.1 ppm Short term stability 0.1 to 30s 5E-11 typ at 1s Tau <5 E-10 Phase noise typical at 10 MHz Static conditions 3.3V / 5V 12V BW = 1Hz 10Hz 100Hz 1 kHz 10 kHz -110 -135 -145 -150 -100 -130 -140 -145 1) <± 1 E-9 / day after 30 days operating dBc/ Hz Table 1: Vdd = 3.3V Operating Temperature range A = Table 1: Vdd = 5V 0 to +60°C ≤ ± 75 ppb B = -20to +70°C ≤ ± 150 ppb C = -40to +85°C ≤ ± 250 ppb Operating Temperature range A = Table 1: Vdd = 12V Table 3: Vc Vdd = 5V ± 0.2V 0 to +60°C ≤ ± 75 ppb B = -20 to +70°C ≤ ± 150 ppb C = -40 to +85°C ≤ ± 250 ppb Operating Temperature range A = Table 2: Idd Vdd = 3.3V ± 0.15V Vdd = 12V ± 0.5V 0 to +60°C ≤ ± 50 ppb B = -20 to +70°C ≤ ± 100 ppb C = -40 to +85°C ≤ ± 200 ppb Temperature Vdd = 3.3V Vdd = 5V Vdd = 12V +25°C -20°C ≤ 120 mA ≤ 170 mA ≤ 80 mA ≤ 120 mA ≤ 50 mA ≤ 80 mA start-up current at 25°C ≤ 250mA duration 30s 10s 10s Frequency control adjustment response slope positive Vdd = 3.3V Vdd = 5V Vdd = 12V Voltage control input impedance > 47kΩ 0 to 3.3V 0.5 to 5V 0.5 to 5V Resistor control R connect pin 1 to ground (Input impedance > -4,7kΩ) 0 to 10kΩ 0 to 10kΩ 0 to 10kΩ No frequency control YA or YB Pin 1 connect to GND Table 4: Output signal Vdd 3.3V 5V 12V Load 50Ω 50Ω 1kΩ // 5pf Level ≤20MHz ≥ 2dBm ≥ 4dBm >1Vpp Level >20MHz ≥ -2dBm ≥ 0dBm >1Vpp Harmonics -10dBc -10dBc -10dBc Spurious -70dBc -70dBc -70dBc Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 80 90 [email protected] www.microcrystal.com STANDARD FREQUENCIES: Frequency «MHz» 10 12 12.8 40 52 54 14.7456 16 20 26 Other frequencies from 10 kHz up to 54 MHz on request ENVIRONMENTAL Storage temp. range -55 to +125°C Vibration resistance 10 to 2000Hz / 20g Shocks resistance 5000g / 0.3ms / ½ sine Pin soldering +235°C / 10s max +260°C / 5s max Package SMD version option D1 or D2 see application notes Dil 14.4 pins GND to case height = 8mm CHARACTERISTICS: TERMINATIONS AND PROCESSING: PRODUCT DESCRIPTION AND ORDERING INFORMATION: OCXOV W V blank = Vdd 3.3V = Vdd 5V = Vdd 12V S = Sine wave A B C X = 0 to 60°C = -20 to 70°C = -40 to 85°C = custom S - C V5 20MHz XXX customer spec N° R1 = R = 0 to 10kΩ V3 = Vc = 0 to 3.3V V5 = Vc = 0.5 to 5V YA internal accuracy= ± 1ppm YB internal accuracy= ± 0.5ppm Y = custom Frequency A unique part number will be generated for each product specification, i.e: 20xxxx-EA00(in ESD plastic tray) Please contact us. All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 80 90 [email protected] www.microcrystal.com Version 15/08.2015