CC6F-T1A Inverted Mesa AT Crystal 30 MHz – 250 MHz DIMENSIONS Package: Recommended Solder Pad: 1,2 3,5 1,2 0,8 max. 0,80 2,5 2,2 0,8 1,5 100% leadfree, RoHS - compliant Miniature SMT ceramic package Package height 0.80 mm max. Fundamental mode frequencies SMD-package in Tape and Reel Ind. and Ext. temperature ranges High stability Low aging High shock and vibration resistance ELECTRICAL CHARACTERISTICS AT 25oC: All dimensions in mm typical DESCRIPTION: This SMD ceramic package has been specially designed for miniature industrial, telecom and VCXO applications. All frequencies are generated in fundamental mode. The crystals are supplied in special trays (200 crystals per tray). For pick-and-place equipment, the parts are available in 12 mm tape: 7” (178 mm) reel with 1’000 crystals 7” (178 mm) reel with 4’000 crystals Frequency Range FL 30–250 MHz Load capacitance 1) CL 10.0 / ∞ pF Frequency tolerance at 25°C 2) ΔF/F +/-50 ppm ΔF/F0 +/-30 ppm Drive level max. P 100 μW Insulation resistance min. Ri 500 MΩ ΔF/F +/-3 ppm Frequency versus temperature –40°C to +85°C Aging first year max. Frequency Example FL 50.000 155.520 MHz Series resistance typ./max. RS 50 / 100 15 / 35 Ω Motional capacitance typ. C1 2.7 5.6 fF Static capacitance typ. C0 2.4 2.9 pF 3) 1) Other load capacitances on request. 2) Tighter and wider frequency tolerances on request. 3) Values for other frequencies consult factory. STANDARD FREQUENCIES: Frequency MHz 50.0000 77.7600 100.0000 106.2500 125.0000 166.6286 200.0000 207.3600 212.5000 250.0000 155.5200 Other frequencies between 30 MHz and 250 MHz on request ENVIRONMENTAL Conditions CHARACTERISTICS: Storage temp. range –55 to +125°C TB Operating temperature range –40 to +85°C TC Extended oper. temp. range TERMINATIONS AND PROCESSING: PRODUCT DESCRIPTION AND ORDERING INFORMATION: Max. Dev. –55 to +125°C Shock resistance ΔF/F 5000 g, 0.3 ms, ½ sine +/-5 ppm Vibration resistance ΔF/F +/-5 ppm 20 g / 10–2000 Hz Type Termination Processing CC6F-T1A For SMD mounting Au plated pads Reflow soldering 260°C / 20 s max. CC6F –T1A 155.520 MHz ∞ pF +/-50ppm TB QI Frequency FL CL Load Capacitance 10.0 pF ∞ pF Frequency tolerance +/- 50 ppm +/- 100 ppm Temperature Range TB = - 40 to 85°C (Standard) TC = - 55 to +125°C Optional: if not defined, ‚Standard‘ will apply Qualification QI = Industrial (Standard) QS = Custom Specification A unique part number will be generated for each product specification, i.e: 20xxxx-MG01 1‘000 pcs (in 12mm tape on 7“ reel) 20xxxx-MG04 4‘000 pcs (in 12mm tape on 7“ reel) 20xxxx-EA00 xxx pcs (in plastic tray) Please contact us. 4 All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 6.1/12.2010