RV-8564-C2 Real Time Clock Module with I2C Bus DIMENSIONS Package: Recommended Solder Pad: 1,0 1,0 1,0 1,0 5,0 ± 0,2 0,6 0,4 4,0 0,9 3,2 2,2 0,35 ± 0,2 0,9 1,0 max.1,2 0,6 4,6 100% leadfree, RoHS - compliant All dimensions in mm typical DESCRIPTION: Automotive qualified, according to AEC-Q200 Rev. C Xtal integrated solution Miniature SMT ceramic package Ultra low power consumption Very tight frequency tolerance I2C Bus Interface (400 kHz) * Programmable Clock-output Low aging Time keeping mode down to 1.2 V Programmable alarm, timer and interrupt functions This very small SMD ceramic package has been specially designed to combine the 32.768 kHz crystal unit with the CMOS-based oscillator and real-time-clock circuit. The calendar function tracks year, month, date, and day-of-the-week with built-in century and leap-year flags. The clock function tracks minute and second in 24-hour format. Programmable alarm setting and universal timer functions increase flexibility. For pick-and-place equipment, the parts are available in 12 mm tape: 7” (178 mm) reel with 1'000 parts 13” (330 mm) reel with 5'000 parts BLOCK DIAGRAM: VDD 32.768 KHz CRYSTAL Voltage Detector 1 GND Control 1 OSC DIVIDER CLKOUT 2 CLKOE 00 Control 2 6 Seconds Minutes OUTPUT CONTROL Hours Days 10 Weekdays INT 7 Month / Century CONTROL LOGIC SCL 4 Years Minutes Alarm 2 I C-BUS Hour Alarm INTERFACE Day Alarm SDA Weekday Alarm 5 ADDRESS REGISTER CLKOUT frequency Timer Control Timer POR * The I2C Bus is a trademark of Philips Electronics N.V. 0F ELECTRICAL CHARACTERISTICS AT 25°C: Symbol Condition Min. Typ. Max Unit Supply voltage VDD I2C Bus Active 1.8 Supply voltage VDD Time keeping 1.2 Power current during access IDD Current consumption Time keeping mode IDDO CLKOUT frequency 5.5 V 5.5 V fscl=400 kHz 800 μA fscl=100 kHz 200 μA fscl=0 Hz, VDD 3 V 250 500 nA fscl=0 Hz, VDD 2 V 225 450 nA Programmable 32768/1024/32/1 Hz Frequency tolerance F/F @ 25°C Aging first year max. F/F @ 25°C Frequency vs. temp. F/FO 20 ≤ T0 ≤ 30 ±10 / ±20 1) ppm ±3 –0.035 ppm ppm 2 /°C² (T - T0) ±10% ppm 1) Tighter and wider frequency tolerances on request. ENVIRONMENTAL CHARACTERISTICS: TERMINATIONS AND PROCESSING: Conditions Storage temp. range –55 to +125°C TA Operating temperature range –40 to +85°C Max. Dev. Shock resistance F/F 5000 g, 0.3 ms, ½ sine +/-5 ppm Vibration resistance F/F 20 g / 10–2000 Hz +/-5 ppm Package-Type Termination Processing SON 10-pin For SMD mounting Au plated pads Reflow soldering 260°C / 20 s max. FREQUENCY TEMPERATURE CHARACTERISTICS: 20.0 0.0 -20.0 DF/F [ppm] -40.0 -60.0 -80.0 -100.0 -120.0 -140.0 -160.0 -180.0 -60 -40 -20 0 20 40 60 80 100 T [°C] Tuning Fork Crystal PIN CONNECTIONS TOP VIEW: Product Marking #10 #6 8564 #1 Pin 1 Index #5 Pin Connection 1 VDD 2 CLKOUT Frequency output 4 SCL Serial clock input 5 SDA Data 6 GND Ground 7 INT Interrupt output 10 CLKOE CLK output enable Power Supply Voltage Pins 3, 8, 9 are not connected. All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 4.3/05.2012