Certificate r/ (2> for European P'roduct Safety Reference No. 709302 Miniature fuse-link Type designation 215 Series Certificate holder Suzhou Llttelfuse OVS Ltd. 6 Xlnghai Street Suzhou Industrial Park Suzhou City, Jiangsu Province 215021 CHINA The product complies with the standard@) EN 60127-2:2003+AI Date of expiry 22 August 2012 EU Directive information The product satisfies the provisions for CE marking according to the Low Voltage Directive 2006/95/EC. Additional information in Appendix. . Certification Body Signed lntertek Semko AB, Product Certification ( A o b Niklas Larsson This certificate is issued in accwdance with the tenns and conditions set out in the Appendix. Place Kista - Stockholm Date 22 August 2007 Page 1 of 2 Appendix Reference No. 709302 Technical data Type designation Rated voltage (V) Rated current (A) Standard sheet Brand name: Product information 21 5 Series AC 250 V 15; 16 and 20 A 5 LF. Time-lag. Size 5 x 20 mm. Breaking capacity: 500 A; power factor: 2 0,95 (15 and 16 A). 400 A; power factor. 2 0,95 (20 A). Type 215 Series includes of type Ref. No. 215015P (15 A); 215016P (16 A) and 215020P (20 A). Manufacturing site(s) Suzhou Littelfuse OVS Ltd. 6 Xinghai Street Suzhou Industrial Park Suzhou City, Jiangsu Province 215021 CHINA ' This certificate, which includes production control, is considered to constitute sufficient support for an EC Declaration of Conformity and CE marking of the product according to the Low Voltage Directive 20061951EC. Certification Body Signed lntertek Semko AB, Product Certification cu- id Place Kista - Stockholm Date 22 August 2007 Niklas Larsson 'This CertificateIs for the exclusive use d Inlertek's Client and is provided pursuant to the Certificationagreement between lnterdek and its Cbent. Intertek's responsibilily and liebllity are limlted to the terms end ccmdltions of the agreement. lntertek assumes no liability to any party, other than to the Client in accordance with the egreement, liw any bss, expense or damage occasioned by the use of this certificate. Onfy the Client is authorized to permit copying or dislnibutlonof this certikate and then only In its entirety. Use of Intertek's Certification mark is resbjded to the conditions Ieid out in the agreement. Any further use d the lntertek name for the sale or &ertisement d fhe tested maleriak product or service must ofsirsf be approved In writlng by htertek. initial Factory Assessnenls and Follow up Servlces are for the pufpopose ofassuring appmpriate usage ofthe Cedilicetion mark in axordance wlth the agreement, hey are not for the purposes d production quality control and do not relieve the Went oftheir obligations in this respect Page 2 av 2 />