Data Sheet - Littelfuse

Gas Discharge Tube (GDT) Products
SG Series
SG Series
RoHS
Description
Littelfuse SG series GDT offers high surge ratings
in a miniature package. It’s designed for surface
mounting on PCB with small size 4.5x3.2x2.7mm.
Low insertion loss is perfectly suited to broadband
equipment applications. The capacitance does not vary
with voltage, and will not cause operational problems
with ADSL2+, where capacitance variation across Tip
and Ring is undesirable. These devices are extremely
robust and are able to divert a 1000A pulse without
destruction.
Features
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662
2 Electrode GDT Graphical Symbol
•RoHS compliant and
Lead-free
•GHz working frequency
•Excellent stability on
multiple pulse duty cycle
•Excellent response to
fast rising transients.
•Ultra Low Insertion Loss
•1-2KA surge capability
tested with 8/20μS
pulse as defined by IEC
61000-4-5
•Ultra small devices
offered in a variety of
mounting lead forms
•Non-Radioactive
•Low capacitance (<1pF)
•Voltage Ranges 75V to
600V
•UL recognized
•Conforms to ITU-T K12,
IEC 1000-4-5
•Square Outline
Applications
•Communication
equipment
•CATV equipment
•Test equipment
•Data lines
•Power supplies
•Telecom SLIC
protection
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/13/15
•Broadband equipment
•ADSL equipment,
including ADSL2+
•XDSL equipment
•Satellite and CATV
equipment
•General telecom
equipment
Gas Discharge Tube (GDT) Products
SG Series
Electrical Characteristics
Device Specifications (at 25°C)
Life Ratings
DC Breakdown Impulse
Impulse
Insulation CapaciArc
Glow
Glow Nominal Nominal Nominal
in Volts
Breakdown Breakdown Resistance tance Voltage
to Arc
Voltage
AC
Impulse Impulse
in Volts
In Volts
Transition
Discharge Discharge Discharge
(@100V/s)
(@1MHz)
(@1A)
Current
Current
Current
(@100V/µs)
(@1 Kv/µsec)
Current
Part
Number MIN TYP MAX
SG75
52 75
98
SG90
63 90 117
SG150
105 150 195
MAX
MIN
500
500
500
650
600
600
>1GΩ
(at 50VDC)
>1GΩ
(at 100VDC)
SG200
140 200 260
550
700
SG230
SG300
SG300Q
SG350
SG350Q
SG400
SG420
SG420Q
SG450Q
SG500Q
SG600Q
172
225
210
263
263
300
315
315
370
400
450
650
700
580
750
600
800
800
650
680
950
1100
800
850
650
900
700
950
1000
750
750
1050
1200
230
300
300
350
350
400
420
420
450
500
600
288
375
390
437
437
500
525
525
500
600
750
(x10 @50Hz)
(x10 @8/20µs)
2A
2kA
MAX
~10 V
~1.0 A
(10/1000µs 100 cycles)
~60 V
<1 pf
2.5 A
>1GΩ
(at 50VDC) <0.8 pf
<1 pf
>1GΩ
<0.5 pf
(at 100VDC)
<1 pf
~12 V
~20 V
~0.5 A
~0.8 A
~12 V
~0.5 A
~10 V
~20 V
~20 V
~16 V
~20 V
2A
~90 V
~140 V
~90 V
~140 V
~90 V
~60 V
NA*
2A
NA*
2A
2A
NA*
1A
<1.0 A
~0.1 A
<0.5 A
~140 V
10 A
1kA
2A
* Specification is not applicable for quick response (SGxxxQ) version of product
Materials
Device Tin Plated 17.5±12.5 Microns
Construction Ceramic Insulator.
Storage and
Operational
Temperature
-40 to +90 °C
Voltage vs. Time Characteristic
Max dynamic breakover
voltage
Voltage
(V)
Product Characteristics
Typical Insertion Loss
Hold-over voltage
@ 1.0 GHz = 0.01 dB
On-State voltage
@ 1.4GHz = 0.1 dB
@ 1.8 GHz = 0.53 dB
@ 2.1 GHz = 0.81 dB
0
200
400
600
800
1000
1200
Time (ns)
@ 2.45 GHz= 1 dB
@ 2.8 GHz = 1.2 dB
@ 3.1 GHz = 1.5 dB
@ 3.5 GHz = 2.1 dB
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/13/15
Gas Discharge Tube (GDT) Products
SG Series
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
tP
TP
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Temperature
Reflow Condition
tL
Ramp-down
Preheat
TS(min)
25
tS
time to peak temperature
(t 25ºC to peak)
Time
Device Marking
Device Dimensions
Type Production
Code Year Code
(last digit)
Dimensions in Millimeters.
A3A
3.2 +/- 0.3
Production
Month Code
0.5 +/- 0.1
2.7 +/- 0.3
4.5 +/- 0.3
Type Code
5.2
2.8
4
Recommended Soldering Pad Layout
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/13/15
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
SG75
SG90
SG150
SG230
SG300
SG300Q
SG350
SG350Q
SG400
SG420
SG420Q
SG450Q
SG500Q
SG600Q
SG200
Month Code
A
B
C
D
E
F
G
H
I
J
K
L
January
February
March
April
May
June
July
August
September
October
November
December
Gas Discharge Tube (GDT) Products
SG Series
Tape and Reel Dimensions (IEC 60286-3, dimension in mm)
Part Numbering System and Ordering Information
Tape Specifications
IEC 60286-3
Dimensions in mm
SG xxx Q
section
B-B
5°
Series
Square GDT
2 ±0.1
A
4 ±0.10
Ø 1.55 ±0.05 Ø 1.6
Breakdown Voltage
±0.1
75 = 75V
90 = 90V
150 = 150V
200 = 200V
230 = 230V
300 = 300V
350 = 350V
400 = 400V
420 = 420V
450 = 450V (Not available without “Q” suffix)
500 = 500V (Not available without “Q” suffix)
600 = 600V (Not available without “Q” suffix)
+0.3
4.9 ±0.1 5°
12 0
5.5 ±0.1
1.75 ±0.1
section
A-A
0.4 ±0.05
B
3 ±0.1
R0.5 typical
A
B
3.65 ±0.1
8 ±0.1
SMD-Tape has to withstand
a minimum Force of
F > 20 N / pocket
2 Kg / pocket
minimum vertical load
(minimum checking
quantity:10 pockets)
Device Option Code
(Blank) = Standard device
Q = Quick Response Version
(300V, 350V, 420V, 450V,
500V, 600V only)
Reel Specifications
Packaging
IEC 60286-3
Dimensions in mm
Part Number and Device Type
SGxxx
Surface mount
Quantity and Packaging
Description
2000pcs/reel in tape and reel
R0.75
Ø100 min.
12.8 min.
Ø330 max.
20.2 min.
1.5 min.
18.4 max.
12.4 +2/-0
11.9 min.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/13/15