Datasheet - Littelfuse

Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > LA Varistor Series
LA Varistor Series
RoHS
Description
The LA Varistor Series of transient voltage surge
suppressors are radial leaded varistors (MOVs)
that are designed to be operated continuously
across AC power lines. These UL recognized
varistors require very little mounting space, and are
offered in various standard lead form options.
Number
The LA Varistor Series are available in four model
sizes: 7mm, 10mm, 14mm and 20mm; and have a
VM(AC)RMS voltage range from 130V to 1000V, and an
energy absorption capability up to 360J. Some LA Series
model numbers are available with clamping voltage
selections, designated by a model number suffix of
either A or B. The 'A' selection is the standard model;
the 'B' selection provides a lower clamping voltage.
See LA Series Device Ratings and Specifications
E320116
Features
Agency Approvals
Agency
Agency Approval
UL1449
Agency File
CECC 42201-006
IEC 61051-1
IEC 61051-2
IEC 60950-1 (Annex Q) for 14mm and
20mm only
116895
22.2-1
91788
CECC 42201-006
IEC 61051-1
IEC 61051-2
IEC 60950-1 (Annex Q) for 14mm and
20mm only
E1273/F
• No derating up to
85ºC ambient
• Lead–free, HalogenFree and RoHS
compliant.
• Available in tape and
reel or bulk pack
• Energy absorption
capability (WTM)
up to 360J
• Wide operating
voltage range
VM(AC)RMS 130V to 1000V
Additional Information
Datasheet
Resources
Samples
Absolute Maximum Ratings
• For ratings of individual members of a series, see Device Ratings and Specifications chart
Continuous
LA Series
Units
Steady State Applied Voltage:
AC Voltage Range (VM(AC)RMS)
130 to 1000
V
DC Voltage Range (VM(DC))
175 to 1200
V
1200 to 6500
A
Transients:
Peak Pulse Current (ITM)
For 8/20µs Current Wave (See Figure 2)
Single Pulse Energy Range
For 10/1000µs Current Wave (WTM)
11 to 360
J
Operating Ambient Temperature Range (TA)
-55 to +85
O
Storage Temperature Range (TSTG)
-55 to +125
O
C
C
Temperature Coefficient (aV) of Clamping Voltage (VC) at Specified Test Current
<0.01
%/OC
Hi-Pot Encapsulation (COATING Isolation Voltage Capability)
(Dielectric must withstand indicated DC voltage for one minute per MIL-STD 202, Method 301)
2500
V
COATING Insulation Resistance
1000
MΩ
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or
any other conditions above those indicated in the operational sections of this specification is not implied.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/15
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > LA Varistor Series
LA Series Ratings & Specifications
Maximum Rating (85°C)
Continuous
Transient
Part
Number
V130LA1P
V130LA2P
V130LA5P
V130LA10AP
V130LA20AP
V130LA20BP
V140LA2P
V140LA5P
V140LA10AP
V140LA20AP
V150LA1P
V150LA2P
V150LA5P
V150LA10AP
V150LA20AP
V150LA20BP
V175LA2P
V175LA5P
V175LA10AP
V175LA20AP
V230LA4P
V230LA10P
V230LA20AP
V230LA40AP
V250LA2P
V250LA4P
V250LA10P
V250LA20AP
V250LA40AP
V250LA40BP
V275LA2P
V275LA4P
V275LA10P
V275LA20AP
V275LA40AP
V275LA40BP
V300LA2P
V300LA4P
V300LA10P
V300LA20AP
V300LA40AP
V320LA7P
V320LA10P
V320LA20AP
V320LA40BP
V385LA7P
Branding
P1301
P1302
P1305
P130L10
P130L20
P130L20B
P1402
P1405
P140L10
P140L20
P1501
P1502
P1505
P150L10
P150L20
P150L20B
P1752
P1755
P175L10
P175L20
P2304
P230L
P230L20
P230L40
P2502
P2504
P250L
P250L20
P250L40
P250L40B
P2752
P2754
P275L
P275L20
P275L40
P275L40B
P3002
P3004
P300L
P300L20
P300L40
P3207
P320L
P320L20
P320L40
P3857
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/15
Model Size
Disc Dia.
(mm)
7
7
10
14
20
20
7
10
14
20
7
7
10
14
20
20
7
10
14
20
7
10
14
20
7
7
10
14
20
20
7
7
10
14
20
20
7
7
10
14
20
7
10
14
20
7
VRMS
VDC
VM(AC)
VM(DC)
(V)
130
130
130
130
130
130
140
140
140
140
150
150
150
150
150
150
175
175
175
175
230
230
230
230
250
250
250
250
250
250
275
275
275
275
275
275
300
300
300
300
300
320
320
320
320
385
(V)
175
175
175
175
175
175
180
180
180
180
200
200
200
200
200
200
225
225
225
225
300
300
300
300
330
330
330
330
330
330
369
369
369
369
369
369
405
405
405
405
405
420
420
420
420
505
Specifications (25°C)
Varistor
Maximum
Typical
Voltage at
Clamping
CapaciPeak
1mA
Energy 10
Voltage
tance f =
Current 8
DC Test
x 1000µs
8 x 20 µs
1MHz
x 20µs
Current
VNOM VNOM
WTM
ITM
IPK
C
VC
Min
Max
(J)
(A)
(V)
(V)
(V)
(A)
(pF)
11
1200
198
242
390
10
180
11
1200
184.5 225.5 340
10
180
20
2500
184.5 225.5 340
25
450
38
4500
184.5 225.5 340
50
1000
70
6500
184.5 225.5 340
100
1900
70
6500
190
220
325
100
1900
12
1200
198
242
360
10
160
22
2500
198
242
360
25
400
42
4500
198
242
360
50
900
75
6500
198
242
340
100
1750
13
1200
225
275
430
10
150
13
1200
216
264
395
10
150
25
2500
216
264
395
25
360
45
4500
216
264
395
50
800
80
6500
216
264
395
100
1600
80
6500
216
243
360
100
1600
15
1200
243
297
455
10
130
30
2500
243
297
455
25
350
55
4500
243
297
455
50
700
90
6500
243
297
455
100
1400
20
1200
324
396
595
10
100
35
2500
324
396
595
25
250
70
4500
324
396
595
50
550
122
6500
324
396
595
100
1100
21
1200
369
451
730
10
90
21
1200
351
429
650
10
90
40
2500
351
429
650
25
220
72
4500
351
429
650
50
500
130
6500
351
429
650
100
1000
130
6500
354
413
620
100
1000
23
1200
405
495
775
10
80
23
1200
387
473
710
10
80
45
2500
387
473
710
25
200
75
4500
387
473
710
50
450
140
6500
387
473
710
100
900
140
6500
389
453
680
100
900
25
1200
441
539
870
10
70
25
1200
423
517
775
10
70
46
2500
423
517
775
25
180
77
4500
423
517
775
50
400
165
6500
423
517
775
100
800
25
1200
459
561
850
10
65
48
2500
459
561
850
25
170
80
4500
459
561
850
50
380
150
6500
462
540
810
100
750
27
1200
558
682
1025
10
60
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > LA Varistor Series
LA Series Ratings & Specifications (Continued...)
Maximum Rating (85°C)
Continuous
Transient
Part
Number
Branding
Model Size
Disc Dia.
(mm)
VRMS
VDC
VM(AC)
VM(DC)
Specifications (25°C)
Varistor
Maximum
Typical
Voltage at
Clamping
CapaciPeak
1mA
Energy 10
Voltage
tance f =
Current 8
DC Test
x 1000µs
8 x 20 µs
1MHz
x 20µs
Current
VNOM VNOM
WTM
ITM
IPK
C
VC
Min
Max
(J)
(A)
(V)
(V)
(V)
(A)
(pF)
51
2500
558
682
1025
25
160
85
4500
558
682
1025
50
360
160
6500
558
682
1025 100
700
30
1200
612
748
1120
10
55
55
2500
612
748
1120
25
140
90
4500
612
748
1120
50
300
160
6500
610
720
1060 100
600
37
1200
643.5 786.5 1190
10
55
56
2500
643.5 786.5 1190
25
120
100
4500
643.5 786.5 1190
50
280
170
6500
643.5 755.5 1110 100
560
35
1200
675
825
1240
10
50
60
2500
675
825
1240
25
120
105
4500
675
825
1240
50
270
180
6500
675
790
1160 100
550
63
2500
738
902
1350
25
100
110
4500
738
902
1350
50
250
190
6500
738
860
1280 100
500
65
2500
819
1001 1500
25
90
120
4500
819
1001 1500
50
220
220
6500
819
960
1410 100
450
67
2500
900
1100 1650
25
80
125
4500
900
1100 1650
50
210
230
6500
900
1100 1650 100
425
75
2500
990
1210 1875
25
65
145
4500
990
1210 1875
50
190
V385LA10P
V385LA20AP
V385LA40BP
V420LA7P
V420LA10P
V420LA20AP
V420LA40BP
V460LA7P
V460LA10P
V460LA20AP
V460LA40BP
V480LA7P
V480LA10P
V480LA40AP
V480LA80BP
V510LA10P
V510LA40AP
V510LA80BP
V575LA10P
V575LA40AP
V575LA80BP
V625LA10P
V625LA40AP
V625LA80BP
V680LA10P
V680LA80AP
P385L
P385L20
P385L40
P4207
P420L
P420L20
P420L40
P4607
P460L
P460L20
P460L40
P4807
P480L
P480L40
P480L80
P510L
P510L40
P510L80
P575L
P575L40
P575L80
P625L
P625L40
P625L80
P680L
P680L80
10
14
20
7
10
14
20
7
10
14
20
7
10
14
20
10
14
20
10
14
20
10
14
20
10
14
(V)
385
385
385
420
420
420
420
460
460
460
460
480
480
480
480
510
510
510
575
575
575
625
625
625
680
680
(V)
505
505
505
560
560
560
560
615
615
615
615
640
640
640
640
675
675
675
730
730
730
825
825
825
875
875
V680LA100BP
P680L100
20
680
875
260
6500
990
1130
1700
100
380
V660LA10P
V660LA50AP
V660LA100BP
V1000LA80AP
V1000LA160BP
P660L
P660L50
P660L100
P1000L8
P1000L16
10
14
20
14
20
660
660
660
1000
1000
850
850
850
1200
1200
70
140
250
220
360
2500
4500
6500
4500
6500
972
972
940
1500
1425
1188
1188
1100
1800
1600
1820
1820
1650
2700
2420
25
50
100
50
100
70
200
400
130
250
NOTE: Average power dissipation of transients not to exceed 0.25W, 0.4W, 0.6W or 1W for model sizes 7mm, 10mm, 14mm and 20mm, respectively.
Phenolic Coating Option -- LA Series Varistors for Hi-Temperature Operating Conditions:
• Phenolic–coated LA Series devices are available with improved maximum operating maximum temperature 125°C.
• These devices also have improved temperature cycling performance capability.
• Ratings and Specifications are as per standard LA Series except Hi–Pot Encapsulation (Isolation Voltage Capability) = 500V.
• These devices are not UL, CSA, VDE or CECC certified.
• To order: add X1347 to end of part number (e.g. V230LA20APX1347).
• Product marking:
LF 9
P230P20
Lead-Free,
YYWW
Halogen-Free
& RoHS Compliant
Indicator
Phenolic Coated
Option
Identifier
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/15
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > LA Varistor Series
Copper Electrode Option:
• Add 'W' to the end of the part number (e.g. V230LA20APW)
• Product marking:
LF 9
P230L20W
YYWW
Lead-Free,
Halogen-Free
& RoHS Compliant
Indicator
Copper Electrode
Option
Identifier
Current Energy and Power Dissipation Ratings
device. The operating values of a MOV need to be derated
at high temperatures as shown above. Because varistors
only dissipate a relatively small amount of average power
they are not suitable for repetitive applications that involve
substantial amounts of average power dissipation.
Should transients occur in rapid succession, the average
power dissipation is the energy (watt-seconds) per pulse
times the number of pulses per second. The power so
developed must be within the specifications shown on the
Device Ratings and Specifications Table for the specific
Figure 1B - Power Derating for Phenolic Coated
100
100
90
90
PERCENT OF RATED VALUE
PERCENT OF RATED VALUE
Figure 1A - Power Derating for Epoxy Coated
80
70
60
50
40
30
20
70
60
50
40
30
20
10
10
0
-55
50
60
70
80
90 100 110 120
AMBIENT TEMPERATURE ( oC)
130
0
-55
140 150
60
70
80
90
100
110
01 = Virtual Origin of Wave
T = Time from 10% to 90% of Peak
T1 = Rise Time = 1.25 x T
T2 = Decay Time
Example - For an 8/20 µs Current Waveform:
8µs = T1 = Rise Time
20µs = T2 = Decay Time
90
50
10
T
T1
TIME
T2
O1 = Virtual Origin of Wave
T = Time From 10% to 90% of Peak
T1 = Virtual Front time = 1.25 • t
T2 = Virtual Time to Half Value (Impulse Duration)
Example: For an 8/20µs Current Waveform:
8 s = T1 = Virtual Front Time
20 s = T2 = Virtual Time to Half Value
FIGURE 2. PEAK PULSE CURRENT TEST WAVEFORM
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/15
120
130
140 150
FIGURE 1. CURRENT, ENERGY AND POWER DERATING
CURVE
100
O1
Figure 2
50
AMBIENT TEMPERATURE ( oC)
FIGURE 1. CURRENT, ENERGY AND POWER DERATING
CURVETest Waveform
Pulse Current
PERCENT OF PEAK VALUE
Peak
80
A7(P)
Pulse Rating Curves
Maximum Clamping Voltage for 7mm Parts
Repetitive Surge Capability for 7mm Parts
Transient V-I Characteristics Curves
V130LA1(P) - V480LA7(P)
V275LA2(P)
V250LA2(P)
200
10 -3
V150LA1(P)
5 INDEFINITE
200
10 -1
10 0
10 1
10 2
PEAK AMPERES (A)
Transient
V-I Characteristics Curves
Figure 3
10 3
1
100
20 -3
10
10 4
6,000 - V300LA4(P)
V130LA2(P)
FIGURE
3. CLAMPING
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGEFOR V130LA1(P) - V300LA2(P)
5,000
MODEL SIZE 7mm
130 TO 300V
M(AC) RATING
MAXIMUM
VOLTAGE
o CCLAMPING
TO
85o C
TA = -55SIZE
3,000
3,000 MODEL
7mm
130
TO
300V
RATING
M(AC)
MAXIMUM
VOLTAGE
o CCLAMPING
2,000
5,000 MODEL
TO7mm
85o C
TA = -55SIZE
V300LA4(P)
2,000
V275LA4(P)
320 TO 480VM(AC) RATING
V250LA4(P)
V275LA2(P)
TA = -55o C TO 85o C
V230LA4(P)
V250LA2(P)
1,000
1,000
3,000
900
900
800
800
V300LA2(P)
700
700
600
V460LA7(P)
600
500
2,000
V480LA7(P)
500
400
MAXIMUM
MAXIMUM
PEAKPEAK
VOLTS
(V) (V)
MAXIMUM
PEAK
VOLTS
(V) VOLTS
4,000
4,000
400
V150LA1(P)
300
300
V175LA2(P)
200
V130LA1(P)
V150LA2(P)
1,000
V140LA2(P)
200
V130LA2(P)
10 3
10 -2
10 -1
10 0
10 1
10 2
10 4
10 -3
V420LA7(P)
100
PEAK AMPERES (A)
V385LA7
(P) 4
10 3
10 -2
10 -1
10 0
10 1
10 2
10 -3
V320LA7
(P) 10
Figure
5
PEAK
AMPERES
(A)
FIGURE 3. CLAMPING VOLTAGE FOR V130LA1(P) - V300LA2(P)
500
10 -3
10 -2 VOLTAGE
10 -1
10 0 V130LA2
10 1 (P)
10-2V300LA4(P)
10 3
10 4
V320LA7(P)
V480LA7(P)
FIGURE-4.
CLAMPING
FOR
PEAK AMPERES (A)
MAXIMUM CLAMPING VOLTAGE
5,000 MODEL SIZE 7mm
FIGURE 5. CLAMPING VOLTAGE FOR V320LA7(P) - V480LA7(P)
6,000
320MAXIMUM
TO 480VM(AC)
RATINGVOLTAGE
CLAMPING
5,000
oC
-55o C TO
8510mm
TA =
MODEL
SIZE
4,000
130 TO 420VM(AC) RATING
3,000
TA = -55o C TO 85o C
3,000
MAXIMUM CLAMPING VOLTAGE
5,000 MODEL SIZE 10mmV460LA7(P)
2,000
2,000 300 TO 680V
V275LA10(P)
V480LA7(P)
V680LA10(P)
M(AC) RATING
V250LA10(P)
TA = -55o C TO 85o C
V230LA10(P)
3,000
V625LA10(P)
1,000 V420LA10(P)
900
V660LA10(P)
800
1,000
700
V300LA10(P)
2,000
600
V420LA7(P)
V320LA10(P)
500
V385LA7(P)
400 V175LA5(P)
V320LA7(P)
V150LA5(P)
500
300
V140LA5(P)
10 -3
10 -2
10 -1
10 0
10 1
10 2V130LA5(P)
10 3
10 4
1,000
V575LA10(P)
Figure
2006
PEAK AMPERES (A)
V510LA10(P)
10 3
10 -2
10 -1
10 0
10 1
10 2
10 4
10 -3
V480LA10(P)/
PEAK AMPERES
(A)
FIGURE 5. CLAMPING VOLTAGE
FOR V320LA7(P)
-V460LA10(P)
V480LA7(P)
V385LA10(P)
500 6. CLAMPING VOLTAGE FOR V130LA5(P) - V420LA10(P)
FIGURE
10 -3
10 -2
10 -1
10 0
10 1
10 2
10 3
10 4
PEAK AMPERES (A)
MAXIMUM CLAMPING VOLTAGE
5,000 MODEL SIZE 10mm
6,000
FIGURE
7.TOCLAMPING
VOLTAGE
FOR
V300LA10(P) - V680LA10(P)
RATING
300
680VM(AC)
MAXIMUM
CLAMPING
VOLTAGE
V680LA10(P)
5,000
oC
T MODEL
= -55o C SIZE
TO 8514mm
4,000 A 130 TO 320V
M(AC) RATING
Figure 4
100 -1
1,000
10
10 0
10 1
10 2
IMPULSE DURATION ( µs)
PEAK AMPERES (A)
10 -2
10 3
2
1,000
V175LA2(P)
V150LA2(P)
V140LA2(P)
V130LA2(P)
2
V130LA1(P)
10 -2
10
300
1
2,000
10
500
200
100
50
20
INDEF
10
5
2
20
10,000 4
10
FIGURE 14. SURGE CURRENT RATING CURVES FOR
V130LA1(P)
- V480LA7(P)
FIGURE
4. CLAMPING
VOLTAGE
FOR V130LA2(P) - V300LA4(P)
MAXIMUM
CLAMPING VOLTAGE
4,000
FIGURE 15.
3,000
MODEL SIZE 7mm
130 TO 300VM(AC) RATING
5,000
o
o
2,000
TA = -55
V300LA4(P)
1 C TO 85 C
MODEL SIZE 14mm
6,000
V275LA4(P)
V130LA10A(P) - V320LA20A(P)
2,000
V250LA4(P)
5,000 2 MAXIMUM CLAMPING VOLTAGE
V230LA4(P)
MODEL SIZE 10mm
4,000 10130 TO 420V
10 2 3
1,0001,000
M(AC) RATING
10
900
o
o
10 4
TA = -55 C TO 85 C
8003,000
500
10 5
700
600
10 6
5002,000
200
V275LA10(P)
400
V250LA10(P)
100
V230LA10(P)
300
50
V175LA2(P)
2001,000 V420LA10(P)
900
V150LA2(P)
800
20
V140LA2(P)
700
V130LA2(P)
INDEFINITE
600
10
100 500
5 10 -2
10 3
10 -1
10 0
10 1
10 2
10 4
10 -3400
V175LA5(P)
PEAK AMPERES (A)
V150LA5(P)
2
300
V140LA5(P)
20
100
1,000
10,000
V130LA5(P)
FIGURE 4. CLAMPING VOLTAGE
V130LA2
(P) - V300LA4(P)
IMPULSEFOR
DURATION
( µs)
200
0
10 -2
10 -1
10RATING
10 1CURVES
10 2 FOR10 3
10 4
10 -316. SURGE
FIGURE
CURRENT
PEAK AMPERES (A)
V130LA10A(P) - V320LA20A(P)
6,000
MAXIMUM CLAMPING VOLTAGE
5,000
SIZE 10mm VOLTAGE FOR V130LA5(P) - V420LA10(P)
FIGURE
6. CLAMPING
10,000MODEL
4,000
130 1TO 420VM(AC) RATING
MODEL SIZE 20mm
2
5,000
o
V130LA20A(P) - V320LA40B(P)
TA = -55 C TO 85o C
3,000
10
10 2 3
2,000
10
6,000
4
2,000
V275LA10(P)
MAXIMUM CLAMPING VOLTAGE10 5
1,000
5,000
V250LA10(P)
10
MODEL SIZE 14mm
4,000
10 6
500
130 TO 320V
RATINGV230LA10(P)
o
M(AC)
o
TA = -55 C TO 85 C
1,0003,000
V420LA10(P)
200
900
800 100
7002,000
V275LA20A(P)
600 50
V250LA20A(P)
500
V300LA20A(P)
V230LA20A(P)
400 20V175LA5(P)V320LA20A(P)
1,000 INDEFINITE
V150LA5(P)
10
300 900
V140LA5(P)
800
5
V130LA5(P)
700
200 600
-32
10 3
10 -2
10 -1
10 0
10 1
10 2
10 4
10500
PEAK AMPERES (A)
400
1
V175LA10A(P)
20
100
1,000
10,000
V150LA10A(P)
IMPULSE
DURATION
(µs) - V420LA10(P)
FIGURE300
6. CLAMPING VOLTAGE
FOR
V130LA5(P)
V140LA10A(P)
V130LA10A(P)
200 18. SURGE CURRENT RATING CURVES FOR
FIGURE
-3
-2
-1
0
1
2
10
10 3
10
10
10
10
10
10 4
V130LA20A(P)
- V320LA40B(P)
6,000
PEAK AMPERES (A)
© 2015 Littelfuse, Inc.
MAXIMUM
CLAMPING
VOLTAGE
5,000
Specifications are subject to change without notice.
MODEL SIZE 14mm
4,000
Revised: 02/23/15
130
320VM(AC) VOLTAGE
RATING
FIGURE
8. TO
CLAMPING
FOR V130LA10A(P) - V320LA20A
TA = -55o C TO 85o C
3,000
5,000
SURGE CURRENT (A)
300
V300LA2(P)
MAXIMUM PEAK VOLTS (V)
1,000
900
800
700
600
500
400
5,000
SURGE CURRENT (A)
SURGE PEAK
CURRENT
(A)(V)
MAXIMUM
VOLTS
2,000
MAXIMUM PEAK VOLTS (V)
MAXIMUM PEAK VOLTS (V)
3,000
SURGE
MAXIMUM
PEAKCURRENT
VOLTS (V) (A)
4,000
4,000
2,000
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
3,000 1 MODEL SIZE 7mm
1,000
V130LA1(P) - V480LA7(P)
130 TO 300VM(AC) RATING
o
o
2
2,000
TA = -55 C TO 85 C
V300LA4(P)
500
V275LA4(P)
3
10V250LA4(P)
10
10 4V230LA4(P)
200
2
10 5
1,000 10
10 6
100
900
800
50
700
600
500
20
400
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
130 TO 300VM(AC) RATING
TA = -55o C TO 85o C
SURGE
CURRENT
(A)
MAXIMUM PEAK
VOLTS
(V)
6,000
5,000
1
2,000
2
1,000
10
500
200
100
50
20
INDE
10
5
2
20
FIGURE 17.
10,000
1
5,000
2,000
SURGE CURRENT (A)
V130LA1(P) - V300LA2(P)
V)
10 4
Transient V-I Characteristics Curves
MAXIMUM
PEAK
PEAK
VOLTSVOLTS
(V) (V)
MAXIMUMMAXIMUM
PEAK
VOLTS
(V)
A2(P)
Radial Lead Varistors > LA Varistor Series
(V)
10 4
Metal-Oxide Varistors (MOVs)
1,000
500
200
100
50
20
INDE
10
5
2
1
20
FIGURE 19.
MAXIMUM PEAK VOL
V275LA4(P)
V250LA4(P)
V275LA2(P)
V230LA4(P)
V250LA2(P)
10 3
10 4
P) - V300LA2(P)
600
600
500
500
400
400
300
300
200
V150LA1(P)
V175LA2(P)
V130LA1(P)
V150LA2(P)
V140LA2(P)
200
V130LA2(P)
10 3
10 -2
10 -1
10 0
10 1
10 2
10 4
10 -3
100
PEAK AMPERES (A)
Transient
V-I
Characteristics
Curves
(Continued...)
10 3
10 -2
10 -1
10 0
10 1
10 2
10 4
10 -3
PEAK AMPERES
(A)
FIGURE 3. CLAMPING VOLTAGE
FOR V130LA1(P)
- V300LA2(P)
Maximum
Parts
(P) - V300LA4(P)
FIGURE 4. Clamping
CLAMPING Voltage
VOLTAGE for
FOR10mm
V130LA2
V130LA5(P)MAXIMUM
- V420LA10(P)
CLAMPING VOLTAGE
MAXIMUM
MAXIMUM
PEAK PEAK
VOLTSVOLTS
(V) (V)
SURGE CURRENT (A)
(P) - V480LA7(P)
P)
V575LA10(P)
V510LA10(P)
V480LA10(P)/
V460LA10(P)
V385LA10(P)
10 3
10 4
P) - V680LA10(P)
FIGURE 14. SURGE CURRENT RATING CURVES FOR
V300LA10(P)
- V680LA10(P)
FIGURE 6.
CLAMPING
VOLTAGE
FOR V130LA5(P) - V420LA10(P)
V130LA1(P)
- V480LA7(P)
5,000 MAXIMUM CLAMPING VOLTAGE
5,000
1 SIZE 10mm
MODEL SIZE 14mm
6,000 MODEL
RATINGVOLTAGE
2TO 680VM(AC)
V680LA10(P)
V130LA10A(P)
- V320LA20A(P)
CLAMPING
2,000300MAXIMUM
5,000
o
o
T MODEL
= -55 C TO
8514mm
C
SIZE
2
4,000 A10
10
130
TO
320V
RATING
1,000
M(AC)
10 3
3,000
TA = -55o C TO 85o C V625LA10(P)10 4
3,000
500
V660LA10(P) 10 5
10 6
V300LA10(P)
2,000
2,000
200
V275LA20A(P)
V320LA10(P)
V250LA20A(P)
V300LA20A(P)
100
V230LA20A(P)
V320LA20A(P)
50
1,000
900
800
1,000
V575LA10(P)
20
700
600
V510LA10(P)
INDEFINITE
10
500
V480LA10(P)/
V460LA10(P)
4005 V175LA10A(P)
V385LA10(P)
500
V150LA10A(P)
300
2
-3
-2
-1
0
1
2 V140LA10A(P)
10
10
10
10
10
10
10 3 10,000
10 4
20
100
1,000 V130LA10A(P)
Figure
9
PEAK AMPERES
(A)( µs)
200
IMPULSE
DURATION
MAXIMUM
PEAK
MAXIMUM
PEAKCURRENT
VOLTSVOLTS
(V)(A) (V)
SURGE
10 4
10 -3
10 -2
10 -1
10 0
10 1
10 2
10 3
10 4
FIGURE7.16.
SURGE CURRENT
RATING
CURVES
PEAK AMPERES
(A)
(P) FOR
- V680LA10(P)
FIGURE
CLAMPING
VOLTAGE
FOR V300LA10
V130LA10A(P) - V320LA20A(P)
FIGURE 8. CLAMPING VOLTAGE FOR V130LA10A(P) - V320LA20A
10,000
1
5,000
2
10
2,000
SURGE CURRENT (A)
420LA7(P)
85LA7(P)
LA7(P)
10 3
5,000 MODEL SIZE 7mm
6,000320 TO 480V
RATING
M(AC)
2,000
MAXIMUM
CLAMPING
VOLTAGE
5,000
-55o C TO
85o10mm
C
TA1 =MODEL
MODEL SIZE 7mm
SIZE
4,000
1,000
V130LA1(P) - V480LA7(P)
130 TO 420VM(AC) RATING
3,000 2
o
o
TA = -55 C TO 85 C
3,000
500
3
10
V460LA7(P) 10 4
10
200
2,000
2,000
V275LA10(P)
V480LA7
(P)
2
10 5
10
V250LA10(P)
10 6
100
V230LA10(P)
50
1,000 V420LA10(P)
900
800
1,000
20
700
600
V420LA7(P)
10
500
V385LA7(P)
INDEFINITE
5
400
V320LA7(P)
V175LA5(P)
V150LA5(P)
500
300
V140LA5(P)
2
10 -3
10 -2
10 -1
10 0
10 1
10 2V130LA5(P)
10 3
10 4
PEAK AMPERES (A)
200
1
20
10 3 10,000
10 -2 100
10 -1
10 0
10 11,000 10 2
10 4
10 -3
DURATION(A)
( µs)
Figure
7 5. CLAMPINGIMPULSE
PEAK AMPERES
FIGURE
VOLTAGE
FOR V320LA7(P) - V480LA7(P)
1,000
500
MODEL SIZE 20mm
V130LA20A(P) - V320LA40B(P)
10 2 3
10
10 4
10 5
10 6
200
100
50
20
INDEFINITE
10
5
300
V175LA2(P)
V150LA2(P)
V140LA2(P)
V130LA2(P)
200
100
10 -3
10 -2
10 -1
10 0
10 1
PEAK AMPERES (A)
10 2
10 3
10 4
Pulse Rating Curves (Continued...)
FIGURE 4. CLAMPING VOLTAGE FOR V130LA2(P) - V300LA4(P)
Repetitive Surge Capability for 10mm Parts
6,000
5,000
V130LA5(P)MAXIMUM
- V680LA10(P)
CLAMPING VOLTAGE
MODEL SIZE 10mm
4,000
130 TO 420VM(AC) RATING
5,000
MODEL SIZE 10mm
3,000 1 TA = -55o C TO 85o C
V130LA5(P) - V680LA10(P)
2,000
2
2,000
2
V275LA10(P)
10 3
1,000
V250LA10(P)
10
10
10 4
V230LA10(P)
500
10 5
10 6
1,000 V420LA10(P)
200
900
800
100
700
600
50
500
MAXIMUM PEAK VOLTS (V)
SURGE CURRENT (A)
900
800
800Lead
Radial
Varistors > LA Varistor Series
V300LA2(P)
700
700
400 V175LA5(P)
20
V150LA5(P)
300 INDEFINITE
V140LA5(P)
10
V130LA5(P)
200
5
10 3
10 -2
10 -1
10 0
10 1
10 2
10 4
10 -3
2
PEAK AMPERES (A)
20
100
1,000
10,000
IMPULSE DURATION ( µs)
Figure 8
FIGURE 6. CLAMPING VOLTAGE FOR V130LA5(P) - V420LA10(P)
FIGURE 15. SURGE CURRENT RATING CURVES FOR
V130LA5(P) - V680LA10(P)
MAXIMUM
PEAK VOLTS
SURGE CURRENT
(A) (V)
1,000
Metal-Oxide
Varistors (MOVs)
1,000
900
V230LA4(P)
1,000
900
800
700
600
500
400
6,000
5,000
5,000
4,000
2,000
3,000
1,000
2,000
500
MAXIMUM CLAMPING VOLTAGE
MODEL
SIZE 14mm
1
MODEL SIZE 14mm
130
2 TO 320VM(AC) RATING V385LA20A(P) - V1000LA80A(P)
TA = -55o C TO 85o C
10
10 2 3
10
4
10V275LA20A(P)
5
10
V250LA20A(P)
V300LA20A(P)
10 6
V230LA20A(P)
V320LA20A(P)
200
1,000
100
900
800
700
50
600
500
20
400
10
300
5
V175LA10A(P)
INDEFINITE
V150LA10A(P)
V140LA10A(P)
V130LA10A(P)
200
2 -3
10
20
10 -2
10 -1
10 0
10 1 1,00010 2
100
PEAK AMPERES
IMPULSE
DURATION(A)
( µs)
10 3
10 4
10,000
FIGURE
17. SURGEVOLTAGE
CURRENT
RATING
CURVES
FIGURE
8. CLAMPING
FOR
V130LA10A
(P) -FOR
V320LA20A
V385LA20A(P) - V1000LA80A(P)
10,000
1
5,000
2
10
2,000
SURGE CURRENT (A)
MAXIMUM
VOLT
MAXIMUM
PEAKPEAK
VOLTS
(V)
2,000
1,000
500
MODEL SIZE 20mm
V385LA40B(P) - V1000LA160B(P)
10 2 3
10
10 4
10 5
10 6
200
100
50
20
INDEFINITE
10
5
2
2
1
1
20
100
1,000
IMPULSE DURATION (µs)
FIGURE 18. SURGE CURRENT RATING CURVES FOR
V130LA20A(P) - V320LA40B(P)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/15
10,000
20
100
1,000
IMPULSE DURATION ( µs)
FIGURE 19. SURGE CURRENT RATING CURVES FOR
V385LA40B(P) - V1000LA160B(P)
10,000
Radial Lead Varistors > 100
LA Varistor Series
V175LA5(P)
V150LA5(P)
V140LA5(P)
V130LA5(P)
300
10 4
10 2
200
Transient
10 3
10 -2
10 -1
10 0Curves
10 1 (Continued...)
10 2
10 -3 V-I Characteristics
50
20
10
V130LA10A(P) - V320LA20A
MAXIMUM PEAK VOLTS (V)
SURGE CURRENT (A)
1
20020
10 -3
10 4
Figure
10 14. SURGE CURRENT RATING CURVES FOR
FIGURE
V130LA1(P) - V480LA7(P)
V385LA20A(P)
V1000LA80A(P)
FIGURE 8. CLAMPING
VOLTAGE FOR V130LA10A(P) - V320LA20A
MAXIMUM PEAK VOLTS (V)
SURGE CURRENT (A)
5,000
CLAMPING VOLTAGE
5,000 MAXIMUM
1
MODEL SIZE
14mm
MODEL SIZE 14mm
V1000LA80A(P)
V130LA10A(P) - V320LA20A(P)
2,0003852TO 1000VM(AC) RATING
V680LA80A(P)
TA = -55o C TO 85o C
10 2 3
3,000
1,000 10
10
10 4
500V660LA50A(P)
10 5
2,000 V625LA40A(P)
10 6
200
100
1,00050
70020
10
500
5
INDEFINITE
300 2
20 10-4
Figure 12
V575LA40A(P)
V510LA40A(P)
V480LA40A(P)/V460LA20A(P)
V420LA20A(P)
V385LA20A(P)
101
10-3 10010-2 10-1 100 1,000
IMPULSE DURATION ( µs)
PEAK AMPERES (A)
102
Figure
11 15. SURGE CURRENT RATING CURVES FOR
FIGURE
FIGURE 16. SURGE
CURRENT
RATING CURVES FOR
V130LA5(P)
- V680LA10(P)
V385LA20A(P) - V1000LA80A(P)
V130LA10A(P) - V320LA20A(P)
3,000
5,000
10,000
2,000
1,000
1,000
500
500
1,000
900
200
800
200
100
700
100
600
50
50
500
10,000
200
100
1,000
900
80050
V275LA40B(P)
INDEFINITE
400 5
V250LA40B(P)
300 2
1
V150LA20B(P)
20V130LA20B(P)
100
1,000
200
IMPULSE DURATION (µs)
-3
-2
-1
0
1
10
103
10
10
10
10
102
FIGURE 18. SURGE CURRENT
RATING(A)
CURVES FOR
PEAK AMPERES
V175LA20A(P)
INDEFINITE
INDEFINITE
103
10,000
104
10,000
10,000
104
V130LA20A(P) - V320LA40B(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 20mm
300 TO 1000VM(AC) RATING
1
MODEL SIZE 20mm
2
5,000
V385LA40B(P) - V1000LA160B(P)
10
3,000
MAXIMUM CLAMPING VOLTAGE 10 2
2,000 MODEL SIZE 20mm
10 3
10 4
M(AC) RATING
1,000 140 TO 230V
2,000
o
o
10 5
TA = -55 C TO 85 C
10 6
500
200
100
1,000
50
V230LA40A(P)
20
INDEFINITE
10
500
5
2
300
1
INDEFINIT
V140LA20A(P)
20
100
1,000
IMPULSE DURATION ( µs)
10-3
10-2
10-1
100
101
102
103
FIGURE 19. SURGE CURRENT
RATING (A)
CURVES FOR
PEAK AMPERES
200
10,000
104
V385LA40B(P) - V1000LA160B(P)
FIGURE 12. CLAMPING VOLTAGE FOR V140LA20A(P) - V230LA40A(P)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/15
V1000LA160B(P)
5,000
1
2,000
2
1,000
10
500
200
100
50
20
INDEFINI
10
5
2
20
10,000
1
5,000
2,000
1,000
500
200
100
50
20
INDEFINI
10
5
10,000
FIGURE 11. CLAMPING VOLTAGE FOR V130LA20B(P) - V275LA40(P)
5,000
V250LA40A(P)
FIGURE 17. SURGE CURRENT RATING CURVES FOR
FIGURE
VOLTAGE
FOR V130LA20A
(P)FOR
- V275LA40A(P)
V385LA20A(P)
- V1000LA80A(P)
FIGURE10.
18.CLAMPING
SURGE
CURRENT
RATING
CURVES
V130LA20A(P) - V320LA40B(P)
1
700
60020
50010
V275LA40A(P)
55 V150LA20A(P)
V130LA20A(P)
22
200
20-3
10-2 100
10-1
100
1011,000 102
110
DURATION
( µs)
100 IMPULSE
1,000
PEAK AMPERES
(A)
Figure20
13
IMPULSE DURATION (µs)
103 10,000
104
MODEL SIZE 20mm
2
V130LA20A(P) - V320LA40B(P)
10
MAXIMUM CLAMPING VOLTAGE
10 2 3
2,000 MODEL SIZE 20mm
10
130 TO 275VM(AC) RATING
10 4
2,000
1,000
10 5
TA = -55o C TO 85o C
10 6
500
5,000
3,000
20
400
20
10
10
300
20
FIGURE 17. SUR
V38
MAXIMUM CLAMPING VOLTAGE
1
MODEL SIZE 14mm
1MODEL SIZE 20mm
MODEL SIZE 20mm
2130 TO 275V2
- V1000LA80A(P)
RATING V385LA20A(P)
M(AC)
V130LA20A(P) - V320LA40B(P)
10
TA = -55o C TO 85o C
10
10
102233
10
10 4
10
10 4 5
10
10 5 6
10
10 6
5,000
2,000
2,000
FIGURE 16. SURGE CURRENT RATING CURVES FOR
FIGURE 9. CLAMPING
VOLTAGE
FOR V385LA20A(P) V130LA10A(P)
- V320LA20A(P)
V1000LA80A(P)
MAXIMUM PEAK VOLTS (V)
SURGE CURRENT (A)
10(P)
10 -2
50
FIGURE 15. SUR
V13
5,000
MODEL SIZE 10mm
5,000 1
V130LA5(P)
- V680LA10(P)
1
MODEL
SIZE 14mm
2,000
V130LA10A(P) - V320LA20A(P)
2,000 22
2
10
1,000
10
10 21033 4
1,000 10
10 10
500
10 410 5
500
10 510 6
200
10 6
200
100
100
50
50
20
20 INDEFINITE
10
INDEFINITE
10
5
5
2
100
1,000
10,000
220
20
100 IMPULSE DURATION
1,000
10,000
( µs)
IMPULSE DURATION ( µs)
V150LA10A(P)
V140LA10A(P)
V130LA10A(P)
100
1,000
10,000
-1
10 3
10IMPULSE
10 0DURATION
10 1 ( µs)10 2
10 4
PEAK AMPERES (A)
100
2
20
10,000
FIGURE 14. SURGE CURRENT RATING CURVES FOR
- V480LA7(P)
V130LA10A(P) - V130LA1(P)
V320LA20A(P)
MAXIMUM
PEAK VOLTS
SURGE
CURRENT
(A) (A)(V)
SURGE
CURRENT
2
300
1,000
IMPULSE DURATION ( µs)
Repetitive Surge Capability for 14mm Parts
MAXIMUM PEAKVOLTS (V)
SURGE CURRENT (A)
)
)
)/
)
)
2,000
6,000
1 MAXIMUM CLAMPING VOLTAGE MODEL SIZE 7mm
5,000
1,000
V130LA1(P) - V480LA7(P)
MODEL SIZE 14mm
4,000 2 130 TO 320V
M(AC) RATING
500
o
o
3,000 10TA = -55 C TO 85 C
10 3
10 4
200
2
10 5
2,000 10
V275LA20A(P)
10 6
100
V250LA20A(P)
V300LA20A(P)
V230LA20A(P)
50
V320LA20A(P)
1,000
900
20
800
700
10
600
500
5 INDEFINITE
400 V175LA10A(P)
100
SURGE
CURRENT
(A)(A)
SURGE
CURRENT
Maximum
Voltage FOR
for 14mm
Parts
FIGURE 6. Clamping
CLAMPING VOLTAGE
V130LA5(P)
- V420LA10(P)
200
5
2
1
20
10
500
10
Pulse Rating Curves (Continued...)
10 4
PEAK AMPERES (A)
A7(P)
INDEFINITE
5
2
1,000
10 3
10 4
10 5
10 6
SURGE CURRENT (A)
V420LA10(P)
10
SURGE CURRENT (A)
Metal-Oxide Varistors
(MOVs)
200
V275LA10(P)
V250LA10(P)
V230LA10(P)
SURGE CURRENT (A)
1,000
900
800
700
600
500
400
2,000
2
500
SURGE CURRENT (A)
MAXIMUM PEAK VOLTS (V
2,000
2
1
20
FIGURE 19. SUR
V38
900
800
700
600
500
1,000
200
SURGE CURRENT (A)
300
V275LA40B(P)
V250LA40B(P)
V150LA20B(P)
V130LA20B(P)
Transient V-I Characteristics Curves (Continued...)
10-3
10-2
2
500
Radial Lead Varistors > LA Varistor Series
400
1
10-1
10 2
100
50
20
10
200
5 INDEFINITE
4
103
100 Pulse
101 Rating
102
10
Curves
(Continued...)
PEAK AMPERES (A)
2
20
1000LA80A(P)
MAXIMUM
PEAKVOLTS
(V)VOLTS
MAXIMUM
PEAK
(V) (V)
SURGE
CURRENT
(A)VOLTS
MAXIMUM
PEAK
0A(P)
P)
P)
P)/V460LA20A(P)
P)
P)
102
103
20A(P)
103-
104
104
FIGURE
16.CLAMPING
SURGE CURRENT
RATING
CURVES
FIGURE
VOLTAGE FOR
V140LA20A
(P) -FOR
V230LA40A(P)
3,000 12.
MAXIMUM
CLAMPING VOLTAGE
V130LA10A(P)
- V320LA20A(P)
(P) - V275LA40(P)
AXIMUM CLAMPING VOLTAGE
ODEL SIZE 20mm
0 TO 1000VM(AC) RATING
= -55o C TO 85o C
625LA80B(P)
60LA100B(P)
575LA80B(P)
V680LA100B(P)
LA80B(P)
LA80B(P)/
LA40B(P)
MODEL SIZE 20mm
M(AC) RATING
2,000 140 TO 230V
10,000
TA1 = -55o C TO 85o C
2
5,000
10
2,000
V1000LA160B(P)
1,000
1,000
500
200
500
100
50
300
20
10
200
5
INDEFINITE
103
104
5,000
V510LA80B(P)
V480LA80B(P)/
V460LA40B(P)
1,000
V140LA20A(P)
the device
from continuing
to function,
and to provide
ampleCURVES
protection.FOR
FIGURE
18. SURGE
CURRENT
RATING
CLAMPING VOLTAGE FOR V300LA40A - V1000LA160B
V130LA20A(P) - V320LA40B(P)
V625LA80B(P)
V680LA100B(P)
5
2
101 1
FIGURE 12. CLAMPING VOLTAGE FOR V140
100
FIGURE 16. V130LA5(P)
SURGE CURRENT
RATING CURVES FOR
- V680LA10(P)
FIG
5,0
2,0
1,0
SURGE CURRENT (A)
MAXIMUM PEAK VOLTS (V)
SURGE
CURRENT
SURGE
CURRENT
(A)(A)
MAXIMUM PEAK VOLTS (V)
FIGURE 15.Surge
SURGECapability
CURRENT RATING
CURVES
FOR
Repetitive
for 20mm
Parts
3,000
5
2
10
FIG
MAXIMUM CLAMPING VOLTAGE
V130LA10A(P)
- V320LA20A(P)
MODEL
SIZE
20mm
V130LA20A(P)
- V320LA40B(P)
140 TO 230VM(AC) RATING
2,000
5,000
o C TO 85o C
10,000TA = -55
11
2
5,000
2
2,000
10
10
2,000
1,000
1,000
1,000
500
500
200
200
500
100
100
50
50
30020
20
10
10
200
55
MODEL
SIZE
14mm
MODEL
SIZE
20mm
V385LA20A(P)
- V1000LA80A(P)
V130LA20A(P)
- V320LA40B(P)
2
102 3
10
3
10
10 4
104
10
1055
10
V230LA40A(P)
1066
10
V140LA20A(P)
INDEFINITE
INDEFINITE
10,00
5,0
2,0
1,0
5
2
10
10-3
10-2
10-1
100
101
102
104
103
PEAK AMPERES (A)
2
2
20
100
1,000
10,000
1
FIGURE 12.
VOLTAGE
V140LA20A
(P)
20 CLAMPING100
1,000
10,000
IMPULSE FOR
DURATION
( µs) (P) - V230LA40A
IMPULSE DURATION (µs)
Figure 18
FIGURE 17. SURGE CURRENT RATING CURVES FOR
FIGURE 18. V385LA20A(P)
SURGE CURRENT
RATING CURVES FOR
- V1000LA80A(P)
V385LA40B(P) - V1000LA160B(P)
V130LA20A(P) - V320LA40B(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 20mm
MODEL SIZE
20mm
300
TO 1000VM(AC) RATING
V130LA20A(P)
-55o C TO 85o C
TA =- V320LA40B(P)
10 23,000
10 3
V625LA80B(P) V680LA100B(P)
10 4
10 5 V660LA100B(P)
2,00010 6
V230LA40A(P)
V575LA80B(P)
Figure 17
AXIMUM CLAMPING VOLTAGE
© 2015 Littelfuse, Inc.
ODEL SIZE 20mm
Specifications V1000LA160B(P)
are subject to change without notice.
00 TO 1000VM(AC) RATING
o
o
Revised: 02/23/15
A = -55 C TO 85 C
100
10
PEAK AMPERES (A
10,000
1
V1000LA160B(P)
5,000
2
2,000
1,000
500
10
FIG
MODEL SIZE 20mm
V385LA40B(P) - V1000LA160B(P)
10 2 3
10
10 4
10 5
10 6
200
100
50
20
10
INDEFINITE
V420LA40B(P)
V385LA40B(P)
V320LA40B(P)
V300LA40A(P)
5
V420LA40B(P)
10-3
10-2
10-1
100
101
102
104
103
V385LA40B(P) PEAK AMPERES 500
(A)
2
2 2
V320LA40B(P)
10-3 10-2
103 104
10-1
100
101
10
V300LA40A(P)
1
1
PEAK
AMPERES
(A)
NOTE:
If
pulse
ratings
are
exceeded,
a
shift
of
V
(at
specified
current)
of
more
than
B(P)-3- V275LA40
(P)
FIGURE
CLAMPING
V140LA20A
(P) - V230LA40A
(P)
N(DC)
2012.
100
1,000
10,000
20
100
1,000
0
1
3
4 VOLTAGE FOR
10
10-2
10-1
10
102 This10
+/-10% 10
could result.
type of10shift, which normally results in a decrease of VN(DC), may
IMPULSE DURATION (µs)
Figure 19
IMPULSE DURATION ( µs)
PEAK AMPERES
result in the(A)
device not meeting the original published
specifications,
but does not
prevent FOR V300LA40A - V1000LA160B
FIGURE
13. CLAMPING
VOLTAGE
2
10-1
SURGE CURRENT (A)
0A(P) -
MAXIMUM PEAKVOLTS (V)
SURGE
CURRENT
SURGE
CURRENT
(A)(A)
MAXIMUM
PEAKPEAK
VOLTS
(V) (V)
MAXIMUM
SURGE
CURRENT
(A) VOLTS
104
MAXIMUM PEAK VOLTS (V)
103
V420LA20A(P)
V385LA20A(P)
10
300
V150LA20A(P)
300
5 INDEFINITE
V130LA20A(P)
103
10-4 10-3 10-2 10-1 100
101
102
104
200
PEAK AMPERES (A)
2 -3
10
10-2
10-1
100
101
102
104
103
Figure
14
PEAK AMPERES
(A)
1
FIGURE
9. CLAMPING VOLTAGE
FOR V385LA20A
(P) 20
100
1,000
10,000
V1000LA80A
(P)
IMPULSE
DURATION ( µs)
FIGURE 10.- V275LA40(P)
CLAMPING VOLTAGE FOR V130LA20A(P) - V275LA40A(P)
V130LA20B(P)
3,000
FIGURE 14.
SURGE
CURRENT
RATING CURVES FOR
MAXIMUM
CLAMPING
VOLTAGE
3,000
V130LA1(P)
V480LA7(P)
MAXIMUM
CLAMPING
MODEL
SIZE
20mm- VOLTAGE
130 TOSIZE
275V
2,000 MODEL
20mm
M(AC) RATING
o C TO 85RATING
o
3,000
130
275V
= -55
T TO
M(AC) C
2,000 MAXIMUM
5,000 T =A -55o CCLAMPING
TO
85o C VOLTAGE
A 1
MODEL
SIZE 20mm
MODEL SIZE 14mm
2 TO 230VM(AC) RATING
V130LA10A(P) - V320LA20A(P)
2,000
2,000 140
o
o
1,000 TA = -55 C TO 85 C
10
10 2 3
900
1,000
1,000
10
800
900
10 4
500
700
800
10 5
600
V275LA40A(P)
1,000
10 6
700
200
500
600
V275LA40B(P)
V230LA40A(P)
V250LA40A(P)
V175LA20A(P)
500
400
100
V250LA40B(P)
400
300
50
500 V150LA20A(P)
300 V130LA20A(P)
V150LA20B(P)
20
V140LA20A(P)
200
INDEFINITE
1010-3 V130LA20B(P)
300
10-2
10-1
100
101
102
104
103
200
0
5 -3
10
103
10-2
10-1 PEAK
10AMPERES
101 (A) 102
104
PEAK AMPERES (A)
200
Figure
16
2 10. 10
-3
0
3
FIGURE
CLAMPING
FOR
V130LA20A
V275LA40A
10-2 VOLTAGE
10-1
10
101
102 (P) -10
104 (P)
20
100
1,000
10,000
PEAK AMPERES
(A)
V130LA20A(P)
FIGURE 11.- V275LA40A(P)
CLAMPING VOLTAGE
FOR V130LA20B
IMPULSE
DURATION
( µs) (P) - V275LA40(P)
MAXIMUM
PEAK
SURGE
CURRENT
(A)VOLTS (V)
102
10-2
1,000
10,000
IMPULSE DURATION ( µs)
V300LA40AMAXIMUM
- V1000LA160B
CLAMPING VOLTAGE
FIGURE
14. SURGE CURRENT RATING CURVES FOR
5,000MODEL SIZE 20mm
130
TO
275V
RATING
2,000
M(AC)
V130LA1(P)
- V480LA7(P)
MAXIMUM
CLAMPING
VOLTAGE
oC
= -55o CSIZE
TO 85
TAMODEL
20mm
5,000
V1000LA160B(P)
300 TO 1000VM(AC) RATING
MODEL SIZE 10mm
5,000 1 T = -55o C TO 85o C
V130LA5(P)
- V680LA10(P)
3,000 A1
MODEL
SIZE 14mm
2,000
1,000
V130LA10A(P) - V320LA20A(P)
2,000 2 2V625LA80B(P) V680LA100B(P)
2
900
10 23
1,000
V660LA100B(P)
800
10 3
10
1010
1,000
2,000
1010 4
V575LA80B(P)
700
500
10
104 55
500
600
V275LA40A(P)
1010 6
V510LA80B(P)
200
500
10 6
V480LA80B(P)/
200 V460LA40B(P)
V250LA40A(P)
V175LA20A(P)
400
100
100
1,000
50
300
V150LA20A(P)
50
V420LA40B(P)
20 V130LA20A(P)
V385LA40B(P)
200 20 INDEFINITE
V320LA40B(P)
1010-3 INDEFINITE
10-2
10-1
100
101
102
104
103
V300LA40A(P)
10
PEAK-1AMPERES
(A)1
5500
-3
-2
0
2
3
10
10
10
10
10
10
10
104
5
PEAK
AMPERES
(A)
2 10.
Figure
15 CLAMPING VOLTAGE FOR V130LA20A(P) - V275LA40A(P)
FIGURE
20
100
1,000
10,000
2
100IMPULSE
1,000
10,000
( µs)
FIGURE20
13. CLAMPING
VOLTAGEDURATION
FOR V300LA40A
- V1000LA160B
IMPULSE DURATION ( µs)
SURGE CURRENT (A)
5,000
MODEL SIZE 14mm
V1000LA80A(P)
3,000 385 TO 1000V
M(AC) RATING
MAXIMUM CLAMPING
VOLTAGE V680LA80A(P)
TA = -55o C TO 85o C
MODEL SIZE 20mm
3,000
2,000
2,000 1 130 TO 275VM(AC) RATING
MODEL SIZE 7mm
V660LA50A(P)
TA = -55o C TO 85o C
1,000 V625LA40A(P)
V130LA1(P) - V480LA7(P)
2,000 2
500
10 3
10
1,000
10 4
200
900
2
10 5
800 10
1,000
10 6
100
700
600
V275LA40A(P)
50
700
V575LA40A(P)
500
V510LA40A(P)
V250LA40A(P)
V175LA20A(P)
500
V480LA40A(P)/V460LA20A(P)
20
400
/V460LA20A(P)
10-3
20
3,000
V130LA20A(P)
- V275LA40A(P)
MAXIMUM
CLAMPING VOLTAGE
00LA80A(P)
10 4
10 5
10 6
500
300
1
FIGURE
11. CLAMPING VOLTAGE FOR V130LA20B
(P) - V275LA40(P)
Maximum Clamping Voltage for 20mm
Parts
A(P)
2,00
1,00
V230L
50
10 3
10
200
5,00
MODEL SIZE 7mm
V130LA1(P) - V480LA7(P)
1,000
SURGE CURRENT (A)
MAXIMUM PEAK VOLTS (V)
Metal-Oxide Varistors (MOVs)
1,000
MAXIMUM PEAKVOLTS (V)
A
2,000
FIGURE 19. SURGE CURRENT RATING CURVES FOR
V385LA40B(P) - V1000LA160B(P)
10,000
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > LA Varistor Series
Wave Solder Profile
Non Lead–free Profile
Lead–free Profile
300
300
250
TEMPERATURE (ºC)
250
TEMPERATURE (ºC)
Maximum Wave 260C
Maximum Wave 240C
200
150
100
200
150
100
50
50
0
0
0
0.5
1
Figure 20
1.5
2
2.5
3
3.5
TIME(MINUTES)
Physical Specifications
4
0
0.5
1
1.5
Figure 21
2
2.5
3
3.5
4
TIME(MINUTES)
Environmental Specifications
Lead Material
Copper Clad Steel Wire
Operating Ambient
Temperature Range
-55°C to +85°C
Soldering
Characteristics
Solderability per MIL–STD–202,
Method 208
Storage Temperature Range
-55°C to +125°C
Insulating Material
Cured, flame retardant epoxy polymer
meets UL94V–0 requirements
Humidity Aging
+85°C, 85% RH, 1000 hours
+/-10% typical voltage change
Device Labeling
Marked with LF, voltage, UL/CSA logos,
and date code
Thermal Shock
+85°C to -40°C 5 times
+/-10% typical voltage change
Solvent Resistance
MIL–STD–202, Method 215
Moisture Sensitivity
Level 1, J-STD-020
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/15
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > LA Varistor Series
VARISTOR MODEL SIZE
7mm
10mm
14mm
20mm
VOLTAGE
MODEL
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
V130LAV320LA
-
12
(0.472)
-
16
(0.630)
-
20
(0.787)
-
26.5
(1.043)
V385LAV1000LA
-
13
(0.0512)
-
17
(0.689)
-
20.5
(0.807)
-
28
(1.102)
øD
All
-
9 (0.354)
-
12.5
(0.492)
-
17
(0.669)
-
23
(0.906)
e
All
6.5
(0.256)
8.5
(0.335)
6.5
(0.256)
8.5
(0.335)
6.5
(0.256)
(Note 2)
8.5
(0.335)
(Note 2)
3.5
(0.138)
1.5
(0.059)
3.5
(0.138)
SYMBOL
Product Dimensions (mm)
A
*SEATING
PLANE
ATRIM
LTRIM
4 (0.157) 6 (0.236)
CRIMPED AND TRIMMED LEAD
e
V130LA-
1.5
3.5
1.5
3.5
1.5
V1000LA
(0.098)
(0.217)
(0.098)
(0.217)
(0.098)
5.5
(0.217)
2.5
(0.098)
5.5
(0.217)
-
5.6
(0.220)
-
5.6
(0.220)
-
5.6
(0.220)
1
Crimped
leads areV320LA
standard on(0.059)
LA types
supplied
in tape(0.138)
and reel (0.059)
(0.138)
(0.059)
and are denoted by the model letter "T." Model letter "S" denotes
2.5 special
5.5 under-crimped
2.5
5.5
straight leads andV385LAletter "U" denotes
leads. 2.5
*Seating
per- IEC-7175.6
E plane interpretation
V130LA-
Dimension
A
VRMS
Voltage
Model
7mm Size
Min.
mm (in)
V130LAV320LA
V385LAV1000LA
-
øb
All
-
e
All
4 (0.157)
e1
E
-
V385LAV510LA
10mm
Size
7.3
-
Max.
Min.
V550LA- mm (in)
mm (in)
V680LA
12 (0.472)
-
13 (0.0512)
-
V1000LA
ØD
V130LAV320LA
V385LAV1000LA
V130LAV320LA
V385LAV510LA
V550LAV680LA
V320LA
9
All
(0.354)
(Note 3)
(0.220)
(0.287)
-
(0.327)
-
-
-
-
0.585
(0.023)
7.314mm Size
(0.287)
-
-
Max.
8.3
mm (in) -
16 (0.630)
17 (0.689)
Max.
- mm (in)
8.3
-
20 (0.787)
(0.327)
-
-
0.685
0.76
12.5 (0.492)
(0.027)
(0.030)
7.3
(0.287)
Min.
mm8.3
(in)
0.86
(0.034)
-
(0.327)
-
10.8
(0.425)
20.5 (0.807)
0.76
0.86
17 (0.669)
(0.030)
(0.034)
20mm
7.3Size
-
Min.
- (in)
mm
-
-
-
(0.287)
Max.
(in)
8.3 mm
(0.327)
26.5 (1.043)
10.8
(0.425)
28 (1.102)
0.76
0.86
23
(0.030)
(0.034)
(Note
2) (Note 2)
6.5
(0.256)
(0.906)
(Note 2)
8.5
(Note 2)
3.5 (0.138)
1.5 (0.059)
3.5 (0.138)
3. 1000V parts
supplied with2.5
lead(0.098)
wire of diameter
1.00 ± 0.05 (0.039
± 0.002). 5.5 (0.217)
2.5 (0.098)
5.5 (0.217)
5.5 (0.217)
2.5 (0.098)
2.5 (0.098)
5.5 (0.217)
8.5 (0.335)
6.5 (0.256)
8.5 (0.335)
1. Dimensions
millimeters,1.5
inches
in parentheses.
1.5 (0.059)
3.5 in
(0.138)
(0.059)
3.5 (0.138)
1.5 (0.059)
NOTES:
6 (0.236)
6.5 (0.256)
2. 10mm (9mm min, 11mm Max) ALSO AVAILABLE; See Additional Lead Style Options
-
5.6 (0.220)
-
5.6 (0.220)
-
5.6 (0.220)
-
5.6 (0.220)
-
7.3 (0.287)
-
7.3 (0.287)
-
7.3 (0.287)
-
7.3 (0.287)
-
8.3 (0.327)
-
8.3 (0.327)
-
8.3 (0.327)
-
8.3 (0.327)
-
-
-
10.8 (0.425)
-
10.8 (0.425)
0.86 (0.034)
0.76 (0.030)
(Note 2)
0.86 (0.034)
(Note 2)
-
29.0 (1.142)
2.41 (0.095)
4.69 (0.185)
V1000LA
-
-
Øb
All
(Note 3)
0.585
(0.023)
0.685
(0.027)
0.76 (0.030)
0.86 (0.034)
0.76 (0.030)
ATRIM
All
-
15 (0.591)
-
19.5 (0.768)
-
LTRIM
All
2.41 (0.095)
4.69 (0.185)
2.41 (0.095)
4.69 (0.185)
2.41 (0.095)
Notes :
1. Dimensions in millimeters, (inches) in parentheses.
2.10mm (9mm Min. & 11mm Max.) ALSO AVAILABLE; see additional lead style options
3.1000V parts supplied with lead wire of diameter 1.00 -/+ 0.05 (0.039 -/+ 0.002)
4.'A' Max. for V1000LC80A (P) = 24.00 (0.945”)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/15
22.5 (0.886)
(NOTE 4)
4.69 (0.185)
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > LA Varistor Series
Tape and Reel Specifications
(Dimensions presented on following page.)
7mm Devices
10, 14 and 20mm Devices
Crimped Leads "LT"
Crimped Leads "LT"
P2
P
P2
P P
DP
P
P DP
DP
DP
DP
P2 P2
P2
P2
P2 P2
P2
P2
E
DP E EE
DH
DHE
DP DP
DPDHDH
DHDH
DP DH
DH
DH
DH
H1
H1 H1
H1
H1
H1 H1
H1
H1
C C
C
C
H
W0
Db Db
Db
Db
H
W
P1
P0
P1 P1
P1
P1P0 P0
t
F F
F
F
DD0DD0
DD0
DD0
t
F
t
t
P2 P2
P2
P2
P2
E
P P
DP
P
P DP
DP
DP
DP
t
F
t
F F
F
F
t
t
t
Crimped Leads "ZT"
Leads
"ZT"
Crimped
Leads
"ZT"
Crimped
Crimped
Leads
"ZT"
Crimped Leads "ZT"
Straight Leads "Ls"
P
P2
P1
P1 P1
P1
P0
P1
P0 P0
P0
P0
t
P0
Crimped Leads
"ZT"
P0
Crimped
Leads
"ZT"
Crimped
Leads
"ZT"
Crimped
Leads
"ZT"
Crimped Leads "ZT"
Straight Leads "Ls"
W W
W
W
DD0
W W
W
W
DD0
W0 W2 W1
W2W2
W1W1
W0W0
W0 W2 W1
W0 W2 W1
Db
Db Db
Db
Db
W
DD0
DD0
DD0
DD0
C C
C
C
H0 H0
H0
H0
W0W0W2W2
W1W1
W0 W2 W1
W0 W2 W1
Db
H0 H0
H0
H0
W2 W1
E
DP E EE
DH
DHE
DP DP
DPDHDH
DHDH
DP DH
DH
DH
DH
C
SEATING
PLANE
SEATING
SEATING
SEATING
PLANE
PLANE
PLANE
SEATING
PLANE
0
H1
C
SEATING
PLANE
SEATING
SEATING
SEATING
PLANE
PLANE
PLANE
SEATING
PLANE
0
P
P P
DP
P
P DP
DP
DP
DP
P2 P2
P2
P2
DP E EE
DH
DHE
DP DP
DPDHDH
DHDH
DP DH
DH
DH
DH
P
E
P P
DP
P
P DP
DP
DP
DP
DP E EE
DH
DHE
DP DP
DPDHDH
DHDH
DP DH
DH
DH
DH
H1
H1
H1 H1
H1
H1
H1 H1
H1
H1
W0 W2 W1
H
H H
H
H
Db Db
Db
Db
H
W0 W2 W1
W0W0
W2W2
W1W1
W0 W2 W1
W0 W2 W1
Db
H H
H
H
W0W0
W2W2
W1W1
W0 W2 W1
W0 W2 W1
Db
Db Db
Db
Db
W
W
DD0
DD0DD0
DD0
DD0
P1
P1 P1
P1
t
F F
F
DD0DD0
DD0
DD0
t
F
P0
t
P2 P2
P2
P2
P
P2
P2 P2
P2
P2
DP E EE
DH
DHE
DP DP
DPDHDH
DHDH
DP DH
DH
DH
DH
Ho
Db Db
Db
Db
t
t
t
P P
DP
P
P DP
DP
DP
DP
W0 W2 W1
Ho
U U
U
W0 W2 W1
U
W0W0
W2W2
W1W1
W0 W2 W1
W0 W2 W1
Db
Ho Ho
Ho
Ho
Db Db
Db
Db
W
W
W W
W
W
DD0
DD0DD0
DD0
DD0
P1
P0
P1 P1
P1
P0
P1 P0P0
P0
E
DP E EE
DH
DHE
DP DP
DPDHDH
DHDH
DP DH
DH
DH
DH
U
H1 H1
H1
H1
W0W0
W2W2
W1W1
W0 W2 W1
W0 W2 W1
Db
Ho Ho
Ho
Ho
t
H1
U
U U
U
U
t
F
F F
F
F
Straight Leads "ZS"
Leads
"ZS"
Straight
Leads
"ZS"
Straight
Straight
Leads
"ZS"
Straight Leads
"ZS"
Under-crimped
Leads "LU"
P
E
P P
DP
P
P DP
DP
DP
DP
H1
H1 H1
H1
H1
P1
P1 P1
P1
P1 P0
P0 P0
P0
P0
t
P0
t
P1 P0P0
F
Straight Leads
"ZS"
P0
Straight
Leads
"ZS"
Straight
Leads
"ZS"
Straight
Leads
"ZS"
Straight Leads "ZS"
Under-crimped Leads "Lu"
P2
W W
W
W
DD0
W W
W
W
t
F
F F
F
F
Under-crimped Leads "ZU"
Leads
Under-crimped
Leads
"ZU"
Under-crimped
"ZU"
Under-crimped
Leads
"ZU"
Under-crimped Leads "ZU"
t
t
t
t
W W
W
W
DD0
DD0DD0
DD0
DD0
P1
P1 P1
P1
P0
P1
P0 P0
P0
P0
t
F
F F
F
F
t
t
t
t
Under-crimped Leads "ZU"
Leads
Under-crimped
Leads
"ZU"
Under-crimped
"ZU"
Under-crimped
Leads
"ZU"
Under-crimped Leads "ZU"
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/15
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > LA Varistor Series
Tape and Reel Specifications (continued)
•
•
•
•
•
Can be supplied to IEC Publication 286-2
Radial devices on tape are supplied with crimped leads, straight leads, or under-crimped leads
7mm parts are available on tape and reel up to 480 VAC only
10mm parts are available on tape and reel up to 510 VAC only
14mm and 20mm parts are available on tape and reel up to 550 VAC only
Symbol
Model Size
Description
7mm
10mm
14mm
20mm
P
Pitch of Component
12.7 +/- 1.0
25.4 +/- 1.0
25.4 +/- 1.0
25.4 +/- 1.0
P0
Feed Hole Pitch
12.7 +/- 0.2
12.7 +/- 0.2
12.7 +/- 0.2
12.7 +/- 0.2
P1
Feed Hole Center to Pitch
3.85 +/- 0.7
8.85 +/- 0.7
8.85 +/- 0.7
8.85 +/- 0.7
P2
Hole Center to Component Center
6.35 +/- 0.7
12.7 +/- 0.7
12.7 +/- 0.7
12.7 +/- 0.7
F
Lead to Lead Distance
5.0 +/- 0.8
7.5 +/-0.8
7.5 +/- 0.8
7.5 +/- 0.8
h
Component Alignment
2.0 Max
2.0 Max
2.0 Max
2.0 Max
18.0 +1.0 / -0.5
18.0 +1.0 / -0.5
18.0 +1.0 / -0.5
18.0 +1.0 / -0.5
12.0 +/- 0.3
12.0 +/- 0.3
12.0 +/- 0.3
12.0 +/- 0.3
9.0 +0.75 / -0.50
9.0 +0.75 / -0.50
9.0 +0.75 / -0.50
9.0 +0.75 / -0.50
0.5 Max
0.5 Max
0.5 Max
0.5 Max
18.0 +2.0 / -0.0
18.0 +2.0 / -0.0
18.0 +2.0 / -0.0
18.0 +2.0 / -0.0
16.0 +/- 0.5
16.0 +/- 0.5
16.0 +/- 0.5
16.0 +/- 0.5
W
Tape Width
W0
Hold Down Tape Width
W1
Hole Position
W2
Hold Down Tape Position
H
Height from Tape Center to
Component Base
H0
Seating Plane Height
H1
Component Height
32.0 Max
36.0 Max
40.0 Max
46.5 Max
D0
Feed Hole Diameter
4.0 +/- 0.2
4.0 +/- 0.2
4.0 +/- 0.2
4.0 +/- 0.2
T
Total Tape Thickness
0.7 +/- 0.2
0.7 +/- 0.2
0.7 +/- 0.2
0.7 +/- 0.2
U
Under-crimp Width
8.0 Max
8.0 Max
8.0 Max
8.0 Max
P
Component Alignment
3° Max 1.00mm
3° Max 1.00mm
3° Max 1.00mm
3° Max
NOTE: Dimensions are in mm.
Standard Bulk Pack Quantity
Standard Bulk Pack Quantity
Varistor Voltage Model
Varistor Model Size
7mm
10mm
14mm
20mm
1500
1000
700
500
300-460
1500
1000
600
400
510-625
1500
1000
500
400
660
N/A
1000
500
400
680
N/A
1000
400
300
1000
N/A
N/A
300
200
130-275
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/15
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > LA Varistor Series
Part Numbering System
OPTION CODES
BASE PART CODES
(See notes below)
(See Ratings & Specifications tables and notes below)
V XXXX LA XX X P W XXXXX
See OPTIONS CODES notes below
For “VARISTOR”
V M(AC)
(Three or four digits -- 130V to 1,000V)
For standard parts, use the BASE PART designator only.
For parts with non-standard options (such as additional form, packaging
and lead space options), use BASE PART + OPTION CODE.
OPTION CODE items are subject to availability and minimum order
requirements. Please contact a Littelfuse products representative for
additional information or questions
SERIES + PACKAGING / LEAD STYLE
DESIGNATOR
(See BASE PART CODES notes below)
LA = Bulk Pack / Straight Leads (standard)
LC = Bulk Pack / Crimped and Trimmed Leads
LS = Tape and Reel / Straight Leads
LT = Tape and Reel / Crimped Leads
LU = Tape and Reel / Under-Crimped Leads
RELATIVE ENERGY INDICATOR
(One or Two Digits)
CLAMP VOLTAGE VARIANT
(One digit, where applicable)
LEAD-FREE, HALOGEN-FREE AND
RoHS COMPLIANT INDICATOR
COPPER ELECTRODE
Ordering Notes:
BASE PART CODES:
OPTION CODES:
Series + Packaging / Lead Style Designators:
X10: 10mm lead spacing option --
Ordering examples:
Straight
Lead
Bulk Pack
(standard)
Straight
Lead
Tape &
Reel
Crimped
Lead
Tape &
Reel
Crimped &
Trimmed
Lead
Bulk Pack
UnderCrimp
Lead
Tape &
Reel
V130LA2P
V130LS2P
V130LT2P
V130LC2P
V130LU2P
Crimped leads are standard on LA Series varistors supplied in
tape and reel, denoted with "LT." For crimped leads without
trimming and any varitions other than that described above,
please contact Littelfuse.
Littelfuse LA Series varistors are shipped standard in bulk pack
with straight leads and lead spacing outlined in the Package
Dimensions section of this data sheet. Contact your Littelfuse
sales representative to discuss non-standard options.
For 10 (-/+1) mm lead spacing (available on 20mm
diameter models only), append standard model
BASE PART number with "X10." Example:
Standard Model
Order As
V130LA20AP
V130LA20APX10
X2855: Nickel Barrier coated wire option -All standard parts use tinned copper clad steel wire.
Nickel Barrier coated wire is available as an option,
consisting of Copper wire with a flashing of Nickel
followed by a top coating of Tin. To order append standard
model BASE PART number with "X2855." Example:
Standard Model
Order As
V130LA20AP
V130LA20APX2855
X1347: Hi-Temperature phenolic coating option -Phenolic Coated LA Series devices are available with improved
maximum operating maximum temperature of 125°C.
To order, add X1347 to end of part number
(Example: V230LA20APX1347).
For additional information please refer to the section labeled
"Phenolic Coating Option" on the third page of this document
under the "Electrical Characteristics" table.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/15