Radial Lead Fuses TE5® > Time-Lag > 400 Series 400 Series, TE5®, Time-Lag Fuse Description The 400 Series is a TE5®, Time-Lag type subminiature fuse designed for overcurrent protection. It is 250V rated and designed in accordance to IEC 60127-3. Features • Lead-free and RoHS Compliant • Low internal resistance • Reduced PCB space requirements • Vibration resistant • Shock safe casing • Direct solderable or plugin versions Applications Agency Approvals Agency • Halogen-free Agency File Number Ampere Range E67006 800mA – 6.3A JET1896-31007-2001 JET1896-31007-1003 1A – 5A 6.3A DE1-40597 500mA – 6.3A CQC09012031624 500mA – 6.3A SUS05024-9004 500mA – 800mA SUS05024-9003 1A – 2.5A SUS05024-9001 3.15A SUS05024-10003 4A – 5A SUS05024-9002 6.3A • Battery chargers • Power supplies • Consumer electronics • Industrial controllers Additional Information Datasheet Samples Resources Electrical Characteristics % of Ampere Rating Opening Time 150% 1 Hour, Minimum 210% 120 Secs., Maximum 275% 400 ms, Minimum; 10 Secs., Maximum 400% 150 ms, Minimum; 3 Secs., Maximum 1000% 20 ms, Minimum; 150 ms, Maximum Electrical Characteristics Amp Code Rated Current Rated Voltage 0500 0800 1100 1125 1160 1200 1250 1315 1400 1500 1630 500mA 800mA 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V Breaking Capacity Voltage Drop 1.0×IN max. (mV) Power Dissipation 1.0×IN max. (mW) Melting Integral 10×IN max. (A2s) 130A/250VAC* 50-60 Hz cosϕ = 1.0 165 116 89 76 76 75 61 55 65 56 48 297 387 432 411 601 758 683 921 936 948 926 2.17 6.72 9.63 14.44 21.75 32.16 61.94 101.61 133.40 216.50 318.71 Agency Approvals x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x * Per VDE, approved breaking capacity is at 100A, 250VAC © 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/14/14 Radial Lead Fuses TE5® > Time-Lag > 400 Series Average Time Current Curves 0.5A 0.8A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A Temperature Rerating Curve DE-RATING CURVE 140 100 100 80 60 10 23°C 40 TIME IN SECONDS PERCENT OF RATING 120 20 0 -40 -20 0 20 40 60 80 1 AMBIENT TEMPERATURE (°C) 0.1 0.01 0.001 0 1 10 100 1000 CURRENT IN AMPERES 300 Recommended Process Parameters: 280 260 Wave Parameter 240 220 Lead-Free Recommendation Preheat: 200 180 (Depends on Flux Activation Temperature) 160 140 120 100 80 60 40 20 240 230 220 210 200 190 180 170 160 150 140 130 110 120 90 100 80 70 60 50 40 30 20 0 0 10 Temperature ( ) - Measured on bottom side of board Soldering Parameters - Wave Soldering (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: Preheat Time: 150° C 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Time (Seconds) Preheat Time Cooling Time Dwell Time Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. © 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/14/14 Radial Lead Fuses TE5® > Time-Lag > 400 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide, UL 94 V-0 Round Pins: Copper, Tin-plated Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s. (Soldering Iron) Operating Temperature –40ºC to +85ºC/21 days (EN 60068-1, -2-1, -2-2, -2-78) +10ºC to +60ºC relative humidity 75% yearly average, without dew, maximum value for 30 days – 95% 24 cycles at 15 min. each (EN60028-2-6) 10–60 Hz at 0.75 mm amplitude 20–2000 Hz at 10 g acceleration Climatic Category Stock Conditions Vibration Resistance Dimensions Part Numbering System 400 xxxx 0000 max. 4 8.5 Series max. 8 4.0±1.0 1.5 Amp Code 4.0±0.5 7.5±0.3 Refer to Amp Code column of Electrical Characteristics Table 1 +0.1 Ø 0.6 0.5 min L –40ºC to +85ºC (consider derating) Holes in PCB Packaging Code 7.5mm Pitch 1 +0.1 5.08 0000 Tape/Ammopack (1,400 pcs) 0440 Shortleads - Bulk (1,400 pcs) 0075 7.5mm pitch - Bulk (1,400 pcs) Holes in PCB Long Leads (L=18.8±0.3mm) Short Leads (L=4.3±0.3mm) Packaging Packaging Option 400 Series Tape & Ammopack Short Leads 7.5 mm Pitch Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A N/A N/A 1,400 1,400 1,400 0000 0440 0075 N/A N/A N/A © 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/14/14