Radial Lead Fuses TE5® > Medium Time-Lag > 398 Series 398 Series, TE5® Modul Protector® Fuse Description The 398 Series are TE5® short circuit protector, medium time-Lag type, 65V rated fuses. Features Agency File Number Ampere Range E67006 125mA - 4A • Highly defined cut-off times • Available from 125mA to 4A • Low internal resistance • Halogen free Applications • Microprocessor protection Electrical Characteristics Additional Information Datasheet • Flame resistant encapsulated casing • Irreversible physical separation Agency Approvals Agency • Reduced PCB space requirements % of Ampere Rating Opening Time 300 10 Seconds, Max. Samples Resources Electrical Characteristics Amp Code Rated Current Marking Code* Voltage Rating 0125 0250 0315 0400 0500 0630 0800 1100 1125 1160 1200 1250 1315 1400 125mA 250mA 315mA 400mA 500mA 630mA 800mA 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A MP13 MP25 MP32 MP40 MP50 MP63 MP80 MP100 MP125 MP160 MP200 MP250 MP315 MP400 65V 65V 65V 65V 65V 65V 65V 65V 65V 65V 65V 65V 65V 65V Breaking Capacity Cold Resistance 0.1×IN typ. (mΩ) Power Disspation 1.0×IN max. (mW) 50A / 65 VAC/DC 50-60 Hz cosϕ=1.0 900 355 260 186 155 115 85 65 48 34 26 21 16 12 50 50 60 75 90 120 140 170 210 320 425 550 650 1000 * Physical Marking on top of the device Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand. © 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/19/13 Melting Integral 10×IN typ. (A2s) 0.0093 0.045 0.081 0.18 0.2 0.37 0.64 1.1 2.3 4.5 7.8 13 23 40 Agency Approvals x x x x x x x x x x x x x x Radial Lead Fuses TE5® > Medium Time-Lag > 398 Series 140 100000 120 PERCENT OF RATING 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A Average Time Current Curves 0.125A Temperature Rerating Curve 100 10000 80 60 40 1000 23°C TIME IN SECONDS 20 0 -40 -20 0 20 40 80 60 AMBIENT TEMPERATURE (°C) 100 10 1 0.100 0.010 0.001 0.20 1 10 100 1000 CURRENT IN AMPERES Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Lead-Free Recommendation Preheat: 200 (Depends on Flux Activation Temperature) 180 160 140 120 100 80 60 40 (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: Preheat Time: 150° C 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 20 0 10 20 0 Temperature (°C) - Measured on bottom side of board 300 Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. © 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/19/13 Radial Lead Fuses TE5® > Medium Time-Lag > 398 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V-0 Round Pins: Copper, Tin-plated Lead Pull Strength 10N (EN 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s. (Soldering Iron) Operating Temperature -40ºC to +85ºC (consider de-rating) Climatic Category -40ºC to +85ºC/21 days (EN 60068-1,-2-1,-2-2,-78) Stock Conditions +10ºC to +60ºC RH, ≤ 75% yearly average, without dew, maximum value for 30 days-95% Vibration Resistance 24 cycles at 15 min. each (EN 60068-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration Part Numbering System Dimensions max. 4 Dimensions (mm) Series 0.6 5.08 1 +0.1 0.5 min 18.8 max. 8 8.5 1.5 Packaging Code Holes in the printed circuit board Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Reel Size N/A 1,400 000 N/A 398 Series Tape & Ammopack © 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/19/13