Radial Lead Fuses TR5® > Time-Lag > 382 Series 382 Series, TR5®, Time-Lag Fuse RoHS Pb Description The 382 Series are TR5®, time-Lag type, 250V rated fuses, with enhanced breaking capacity designed in accordance to IEC 60127-3. Features Agency File Number Ampere Range 5007679-1170-0038/82455 1A - 4A Liscense number: 5007679-1170-0006/82571 Certification: 1026674 File number: E 67006 JET1896-31007-2001 JET1896-31007-1003 2007010207240344 CQC07012020713 SU05024-7003 SU05024-7002 SU05024-7001 SU05024-7004 SU05024-7005 • Shock safe casing • Reduced PCB space requirements • Vibration resistant • Direct solderable or plug-in versions • Available from 1A to 10A • Halogen free • 100A breaking capacity Agency Approvals Agency •Lead-free 5A - 6.3A 1A - 6.3A 1A - 10A 1A - 10A 1A - 4A 5A - 6.3A 1A - 6.3A • Internationally approved • Low internal resistance Applications • Battery Chargers • Power supplies • Consumer Electronics • Industrial Controllers Electrical Characteristics % of Ampere Rating 150% 1A - 6.3A 8A - 10A 1 Hour, Min. 1 Hour, Min. 210% 2 Minutes, Max. 300 s, Max. 275% 400 ms, Min. ; 10 Sec., Max. 1 s, Min. ; 20 s, Max. 400% 150 ms, Min. ; 3 Sec., Max. 150 ms, Min. ; 3 Sec., Max. 1000% 20 ms, Min. ; 150 ms, Max. 20 ms, Min. ; 150 ms, Max. Opening Time Additional Information Datasheet Resources Samples © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/06/15 Radial Lead Fuses TR5® > Time-Lag > 382 Series Electrical Characteristics Amp Code Rated Current Voltage Rating Breaking Capacity Voltage Drop 1.0×IN max. (mV) Power Dissipation 1.5×IN max. (mW) Melting Integral 10×IN min. (A2s) Agency Approvals 1100 1.00 A 250 V 100 400 3.0 X X X X X X 1125 1.25 A 250 V 95 465 4.5 X X X X X X 9.0 1160 1.60 A 250 V 90 490 X X X X X X 1200 2.00 A 250 V 85 670 12 X X X X X X 1250 2.50 A 250 V 80 750 22 X X X X X X 1315 3.15 A 250 V 75 900 32 X X X X X X 1400 4.00 A 250 V 70 1200 58 X X X X X X 100A / 250VAC 50-60 Hz cos ϕ = 1.0 1500 5.00 A 250 V 65 1250 90 G X X X QCC X 1630 6.30 A 250 V 65 1400 105 G X X X CQC X 1800 8.00 A 250 V 63 1600 180 X X 2100 10.00 A 250 V 57 1600 260 X X Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand. Temperature Re-rating Curve 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A 8.00A 10.00A Average Time Current Curves 140 100000 PERCENT OF RATING 120 100 10000 80 60 40 1000 23°C 0 -40 -20 0 20 40 AMBIENT TEMPERATURE (°C) 60 80 TIME IN SECONDS 20 100 10 1 0.100 0.010 0.001 0.20 1 10 CURRENT IN AMPERES © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/06/15 100 1000 Radial Lead Fuses TR5® > Time-Lag > 382 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: Preheat Time: 150° C 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds 40 Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Time (Seconds) Cooling Time Preheat Time Dwell Time Note: These devices are not recommended for IR or Convection Reflow process. Product Characteristics Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94 V-0 Round Pins: Copper, Tin-plated Materials Lead Pull Strength 10 N (EN 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s. (Soldering Iron) Operating Temperature Climatic Category Stock Conditions Vibration Resistance Dimensions -40ºC to +85ºC /21 days (EN 60068-1,-2-1,-2-2,-2-78) +10ºC to +60ºC RH ≤ 75% yearly average, without dew, maximum value for 30 days–95% 24 cycles at 15 min. each (EN 60068-2-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration Part Numbering System ∅ 8.5 382 xxxx 0000 max. 8 Series ∅ 0.6 0.5 min L -40ºC to +85ºC (consider de-rating) Amp Code Long Leads (L=18.8mm) Short Leads (L=4.3mm) Refer to Amp Code column of Electrical Characteristics Table Packaging Code 0000 Tape/Ammopack (1,000 pcs.) 0410 Short Leads - Bulk (1,000 pcs.) 0430 Short Leads - Bulk (200 pcs.) 1 +0.1 5.08 LöcherHoles in der Leiterplatte in PCB Holes in the printed circuit board Packaging Packaging Option 382 Series Tape & Ammopack Short Leads Short Leads Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A N/A N/A 1,000 1,000 200 0000 0410 0430 N/A N/A N/A © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/06/15