PLED Open LED Protectors PLED6M Series PLED6M Series RoHS Description The open LED protector provides a switching electronic shunt path when an LED in an LED string fails as an open circuit. This ensures that the entire array of LEDs will continue to function even if a single LED in the array does not. This provides higher reliable lighting functions in applications such as headlights, aircraft lights, airport runway lighting, roadside warning lights, etc. This device is designed to be used with one watt LEDs, nominally 350mA @ 3V, and is available in POWERMITE®* package (CSP) which is ideal for dense board applications. Pinout Diagram Features & Benefits • Fast switching Anode Cathode MT2 MT1 • Compatible with industrial lighting environments • Automatically resets after power cycle • Compatible with PWM frequencies up to 10 kHz •Available in low profile, small footprint POWERMITE® packages • RoHS compliant and halogen-free Schematic Symbol MT2 Control Circuit MT1 Cathode Electrical Characteristics(All parameters are measured at TA=25°C unless otherwise noted) Part Number PLED6M VBR ILEAK @IBR = 1 mAmps IMT2 = 5V Volts Critical rate of rise dV/dt Capacitance V V pF Typ Typ Max Max 1.15 1.2 250 24 VT VT VT @IT = 350mA @IT=1A @IT=1.3A A V V Max Max 1.2 IH IS IT@VT uA mA mA Marking P6M Min Max Max Max Max 5.5 7.5 250 12 70 1.0 12 @1MHz, 2V bias Notes: 1) Standard FR-4 PCB with Copper Pads (2mm x 2mm/pad) 2) Aluminum PCB Pads (2mm x 3mm/pad) © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/27/15 PLED Open LED Protectors PLED6M Series Thermal Considerations Package Symbol Parameter Value IT Average On−State Current, (TA = 25°C) VT On-state Voltage (TA = 125°C) PD Power Dissipation (TA = 25°C) TJ Operating Junction Temperature Range TS Storage Temperature Range 1.0 1.0 Anode POWERMITE Cathode 12 1 1.50 2 1 50 2 -65 to +150 RθJL Thermal Resistance: Junction to Lead RθJA Thermal Resistance: Junction to Ambient 25 1 20 2 80 1 50 2 Notes: 1) Standard FR-4 PCB with Copper Pads (2mm x 2mm/pad) 2) Aluminum PCB Pads (2mm x 3mm/pad) * POWERMITE® is a registered trademark of Microsemi Corporation. V-I Characteristics VBR vs. Junction Temperature IS IH -V +V VT VBR P e rc e n t o f VBR C h a n g e – % +I IT 10 8 6 25 ˚C 4 2 0 -4 -6 -8 -40 -20 2.0 1.8 25.00 1.6 20.00 1.4 25 ˚C 1.0 0.8 0.6 0 20 40 60 80 100 120 140 160 Capacitance vs Voltage Capacitance (pF) iH (T C = 2 5 ˚C ) R a tio o f iH Normalized DC Holding Current vs. Ambient Temperature 0.4 -40 -20 20 Junction Temperature (TJ ) ˚C -I 1.2 0 40 60 80 100 120 140 160 Ambient Temperature (T C ) ˚C © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/27/15 15.00 10.00 5.00 0.00 0 1 2 3 Bias (V) 4 5 A V 1.45 80 Unit W °C °C °C/W °C/W PLED Open LED Protectors PLED6M Series Leakage Current vs Temperature LED Interference Test Circuit Q1 Leakage (µA) 30.00 25.00 2.0 Ω, 1/4 W 20.00 110 kΩ, 1/4 W 15.00 + 10.00 - 5.00 Vbat 12 Vdc LED Driver Q2 2N2222 PWM MT2 PLED Control Circuit 0.00 -40 -25 0 25 50 75 100 Temperature (ºC) 125 150 ON/OFF Switch MT1 Operating Current vs. Ambient Temperature 0.8 Operating Current (A) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 110 120 130 Ambient Temperature (ºC) Typical Operation Waveforms 100mA LED CH2 I: LED, 10mV/div=100mA/div CH3 V: PLED6M 350mA LED CH2 I: LED, 10mV/div=200mA/div CH3 V: PLED6M CH2 CH2 CH3 CH3 © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/27/15 PLED Open LED Protectors PLED6M Series Soldering Parameters Pb – Free assembly Reflow Condition - Temperature Min (Ts(min)) Pre Heat 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 30 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes max Do not exceed 260°C Physical Specifications Environmental Specifications Terminal Material Copper Alloy High Temperature Voltage Blocking MIL-STD-750: Method 1040, Condition A 80% min VBR DC, 150°C, 504 hours Terminal Finish 100% Matte Tin Plated Temperature Cycling MIL-STD-750: Method 1051 -65°C to 150°C, 15-minute dwell, 100 cycles Body Material UL recognized epoxy meeting flammability classification 94V-0 Biased Temperature & Humidity EIA/JEDEC: JESD22-A101 80% min VBR, 85°C, 85%RH, 1008 hours Resistance to Solder Heat MIL-STD-750: Method 2031 260°C, 10 seconds Moisture Sensitivity Level JEDEC-J-STC-020D, Level 1 Burn-In Test Tj = 150°C, IT = 0.350 Adc, 1008 hours Packaging Package Code Description Packaging Quantity Industry Standard M POWERMITE 3000 EIA-481-1 Tape and Reel Part Numbering System Part Marking System PLED 6 M Device Type Cathode Bar Package Type: PLED: LED Protector Typical VBR M: POWERMITE Anode Lot Number © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/27/15 P6M XXX Product Identifier Cathode PLED Open LED Protectors PLED6M Series Dimensions - POWERMITE® Package Dimensions Millimeters Inches Min Max Min Max A 0.73 0.99 0.029 0.039 B 0.40 0.66 0.016 0.026 C 1.77 2.03 0.070 0.080 D 2.21 2.46 0.087 0.097 E 0.50 0.76 0.020 0.030 F 1.29 1.54 0.051 0.061 G 0.53 0.78 0.021 0.031 H 0.10 0.20 0.004 0.008 I 1.77 2.03 0.070 0.080 J 0.89 1.14 0.035 0.045 Tape and Reel Specification - POWERMITE® Package Symbols C A D N W1 B Reel Dimension P1 P0 D0 P2 F W D1 K0 1.17 (0.046) A0 2.28(0.090) B0 Description Inches Millimeters MIN TYP MAX MIN TYP MAX - - 7.087 - - 180.00 2.50 4.00 5.50 A Reel Diameter B Drive Spoke Width 0.098 0.157 0.217 C Arbor Hole Diameter 0.504 0.512 0.520 12.80 13.00 13.20 D Drive Spoke Diameter 0.795 N Hub Diameter 2.343 2.362 2.382 59.50 60.00 60.50 W1 Reel Inner Width at Hub 0.472 0.488 0.508 12.00 12.40 12.90 A0 Pocket Width at Bottom 0.078 0.082 0.086 1.98 2.08 2.18 B0 Pocket Length at Bottom 0.198 0.202 0.206 5.04 5.14 5.24 D0 Feed Hole Diameter 0.055 0.059 0.063 1.40 1.50 1.60 D1 Pocket Hole Diameter 0.053 0.059 0.069 1.35 1.50 1.75 0.217 0.236 5.00 5.50 1.60 F Feed Hole Center-Pocket 0.197 Hole Center 2 - - 20.20 - - K0 Pocket Depth 0.044 0.048 0.052 1.11 1.21 1.31 P0 Feed Hole Pitch 0.154 0.157 0.161 3.90 4.00 4.10 P1 Component Spacing 0.154 0.157 0.161 3.90 4.00 4.10 P2 Feed Hole Center-Pocket 0.077 0.079 0.081 Hole Center 1 1.95 2.00 2.05 W Embossed Carrier Tape Width 0.469 0.472 0.484 11.90 12.00 12.30 Cover Tape Width - 0.366 - - 9.30 - © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/27/15