SDP Biased Series - SOT23-6

SIDACtor ® Protection Thyristors
Broadband Optimized™ Protection
SDP Biased Series - SOT23-6
RoHS
Pb e3
Description
This new SDP Biased series provides overvoltage
protection for applications such as VDSL2, ADSL2,
and ADSL2+ with minimal effect on data signals. This
silicon design innovation results in a capacitive loading
characteristic that is compatible with these high bandwidth
applications. This surface mount SOT23-6 package provides
a surge capability that exceeds most worldwide standards
and recommendations for lightning surge withstand
capability of tertiary protectors.
Features & Benefits
Agency Approvals
• Compatible with VDSL2
(30MHz)
Agency
• Balanced overvoltage
protection
Agency File Number
E133083
• Low distortion
Pinout Designation & Schematic Symbol
• Low insertion loss
• Low profile
• Response time under
500ns
• 2nd level interconnect is
Pb-free per IPC/JEDEC
J-STD-609A.01
Applicable Global Standards
• ANSI C62.41
6
1
2
5
3
4
• IEC 61000-4-2 level 4
• IEC 61000-4-12
-- 15kV (air discharge)
• IEC 61000-4-5, 30A
-- 8kV ( contact discharge)
(tP=8/20μs)
Absolute Maximum Ratings between pin1 and pin 3, Ta= 25ºC (Unless otherwise noted)
Part Number
SDP0240T023G6RP
Marking
Ipp
Maximum Junction
Temperature
Storage Temperature Range
ºC
ºC
8/20µs
A Max
150
-65 to 150
30 1
P24
Notes:
1. The device must be in thermal equilibrium at 25ºC
Electrical Characteristics between pin 1 and pin 3, Ta = 25°C
Part Number
Marking
SDP0240T023G6RP
P24
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 10/06/14
VDRM
IDRM
V @1V/us
@IDRM=100nA @VDRM=19V S
IH
IS
Co@f=1MHz,2V
Delta Co@
Line Bias
= 1 V to 19 V
V min
pA typ
V max
mA typ
mA min
pF max
pF max
19
300
29
40
10
3.0
0.5
1
SDP Biased Series SOT23-6
SIDACtor ® Protection Thyristors
Broadband Optimized™ Protection
Typical capacitance against line voltage (without
external bias)
V-I: Characteristics
Capacitance (pF)
2.0
1.5
1.0
0.5
0.0
0
2
4
6
8
10
12
14
16
18
20
Voltage (Volt)
Surge Ratings
IPP
Series
1.2/50µs 1 / 8/20µs 2
A min
G
30
Notes:
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product.
- The device must be in thermal equilibrium at 25°C.
1 Voltage waveform in µs
2 Current waveform in µs
Thermal Information
Parameter
Rating
Storage Temperature Range
Units
-65 to 150
˚C
Maximum Junction Temperature
150
˚C
Maximum Lead Temperature (Soldering 10s)
260
˚C
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 10/06/14
2
SDP Biased Series SOT23-6
SIDACtor ® Protection Thyristors
Broadband Optimized™ Protection
Normalized Holding Current vs. Case Temperature
1.08
1.2
1.06
1.1
Normalized IH
Percent of VS Change – %
Normalized VS Change vs. Junction Temperature
1.04
1.02
1.00
0.98
0.96
-50
-25
0
25
50
75
1.0
0.9
0.8
0.7
0.6
100 125 150
-50
Junction Temperature (TJ) – °C
-25
0
25
50
75
100 125 150
Case Temperature ºC
Soldering Parameters
Reflow Condition
- Temperature Min (Ts(min))
Pre Heat
- Temperature Max (Ts(max))
- Time (Min to Max) (ts)
Pb-Free assembly
150°C
200°C
60-180 secs.
Average ramp up rate (Liquidus Temp (TL)
to peak)
3°C/sec. Max.
TS(max) to TL - Ramp-up Rate
3°C/sec. Max.
Reflow
- Temperature (TL) (Liquidus)
+217°C
- Temperature (tL)
60-150 secs.
Peak Temp (TP)
250(+0/-5)°C
Time within 5°C of actual Peak Temp (tp)
20-40 secs.
Ramp-down Rate
6°C/sec. Max.
Time 25°C to Peak Temp (TP)
8 min. Max.
Do not exceed
260°C
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 10/06/14
3
SDP Biased Series SOT23-6
SIDACtor ® Protection Thyristors
Broadband Optimized™ Protection
Physical Specifications
Environmental Specifications
Temp Cycling
Mil-STD-883F, Method 1010.8 Condition
C, -65°C to +150°C
168 Hrs, 85°C /60%RH+3IR-Reflow,
260°C +5V, -0°C
Bias Humidity
JESD 22-A101-B 85°C , 85°CRH. 50V
168 Hrs, 85°C /60%RH+3IR-Reflow,
260°C +5V, -0°C
Pressure Cooker
JEDEC 22-A102C No Bias, 121°C,
100%RH 96Hrs/192Hrs.
168 Hrs, 85°C /60%RH+3IR-Reflow,
260°C +5V, -0°C
High Temp Storage
JESD 22-A103C Con B. 150°C, no bias 1000Hrs
HTRB
JESD 22-108C
168 Hrs, 85°C /60%RH+3IR-Reflow,
260°C +5V, -0°C
Thermal Shock
Mil-STD-883F, Method 1011.9 Condition
A, 0°C to 100°C
168 Hrs, 85°C /60%RH+3IR-Reflow,
260°C +5V, -0°C
C-SAM
As per flow, JSTD-020C pre&post
preconditioning test.
Wet Humidity
(Tin only)
JESD 201A standard: 55°C/85%RH
SOT23: Matte Tin
Lead Plating
Lead Material
Copper Alloy
Lead Coplanarity
0.0004 inches (0.102mm)
Subsitute Material
Silicon
Body Material
Molded Epoxy
Flammability
UL94-V-0
Notes:
1. All dimensions are in millimeters.
2. Dimensions include solder plating.
3. Dimensions are exclusive of mold flash & metal burr.
4. All specifications comply to JEDEC MO-178
5. Blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form.
6. Package surface matte tine
Dimensions - SOT23-6
Dimensions
Inches
Min
Min
Max
A
0.041
0.057
1.050
1.450
0.000
0.006
0.000
0.150
A2
0.041
0.051
1.050
1.300
b
0.014
0.020
0.350
0.508
C
0.004
0.008
0.090
0.200
D
0.110
0.118
2.800
3.000
E
0.102
0.118
2.600
3.000
E1
0.057
0.069
1.450
1.750
0.037 (BSC)
e1
0.071
L (note 4.5)
0.004
N (note 6)
M
Max
A1
e
Recommended Solder Pad Layout
Millimeters
0.950 (BSC)
0.075
1.800
0.023
0.100
6
1.900
0.600
6
0°C
10°C
0°C
10°C
M
-
0.102
-
2.590
O
-
0.027
-
0.690
P
-
0.039
-
0.990
R
-
0.038
-
0.950
Notes:
1. Dimensioning and tolearances per ANSI 14.5M-1982.
2. Package conforms to EIAJ SC-74 (1992)
3. Dimensions D and E1 are exclusive of mold flash, protrusions, or gate burrs.
4. Foot lenth L measured at reference to seatng plane.
5. “L” is the length of flat foot surface for soldering to substrate.
6. “N” is the number of terminal positions.
7. Controlling dimension: MILLIMETER. Converted inch dimensions are not necessarily
exact.
P
R
O
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 10/06/14
4
SDP Biased Series SOT23-6
SIDACtor ® Protection Thyristors
Broadband Optimized™ Protection
Part Numbering
Part Marking
SDP 024 0 T023 G 6 RP
6
5
4
Reel Pack
Type
SIDACtor DSL Protector
P24
Number of pins
Nominal Working voltage:
Surge Ipp rating
Construction variable:
Package Type
0=single chip
1
2
Part Marking Code
3
Packing Options
Package Type
SOT23-6
Description
Quantity
Tape and Reel
3000
Embossed Carrier Tape & Reel Specification - SOT23-6
14.4mm
ACCESS HOLE
13mm
180mm
4.0mm
2.0mm
1.5mm
DIA. HOLE
1.75mm
CL
8mm
4.0mm
60mm
GENERAL INFORMATION
1. 3000 PIECES PER REEL.
2. ORDER IN MULTIPLES OF FULL REELS ONLY.
3. MEETS EIA-481 REVISION "A" SPECIFICATIONS.
SOT-23 (8mm POCKET PITCH)
8.4mm
USER DIRECTION OF FEED
PIN 1
COVER TAPE
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 10/06/14
5
SDP Biased Series SOT23-6