MIL & MIV Series 5X7 Ceramic SMD Oscillator 5mm x 7mm 6 Pads Ceramic Package Negative Enable Available Wide Frequency Range LVPECL or LVDS Output LVPECL LVDS Frequency 19.440 MHz to 1.000GHz Frequency Stability (See Part Number Guide for Options) Aging Operating Temperature Range Storage Temperature Range Supply Voltage (Vdd) Supply Current Output Voltage Logic “0” (Vol) Output Voltage Logic “1” (Voh) Symmetry (at 50% of wave form) Rise / Fall Time (20% to 80%) Phase Jitter Load Drive Capacity Enable / Disable Function Positive Enable / Disable Negative Enable / Disable ±3ppm First Year max (See Part Number Guide for Options) -55°C to +125°C +2.5 VDC ±5% +3.3 VDC ±5% +2.5 VDC ±5% +3.3 VDC ±5% 65mA max 80mA max 45mA max Vdd - 1.620Vdc max 1.43V typ Vdd - 1.025Vdc min 1.10V typ (See Part Number Guide fro Options) 1nSec max 1pSec at 12KHz to 20.000MHZ 50Ω 50Ω (See Part Number Guide for Options) Voh = 70% of Vdd min to Enable Output Vol = 30% max or grounded to Disable Output (High Impedance) Voh = 70% of Vdd min to Disable Output (High Impedance) Vol = 30% min or No Connect to Enable Output Mechanical & Environmental Detail Shock Solderability Solvent Resistance MIL-STD-883, Method 2002 Cond B MIL-STD-883, Method 2003 MIL-STD-202, Method 215 Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ = Internal Code = 4 Digit Date Code (Year / Week) = Denotes RoHS Compliant Line 2 = SYYWWL S Vibration MIL-STD-883, Method 2007, Cond A YYWW Gross Leak Test MIL-STD-883, Method 1014, Cond C L Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com Revision: Subject to change without notice 10’24/13 P Pg 1 of 2 Part Number Guide FREQUENCY MI 5x7 Ceramic SMD Output Symmetry Blank = 40%/60% A = 45%/55% B = 47.5%/52.5% L = LVPECL V = LVDS Frequency Stability 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Supply Voltage 2 = +2.5 VDC 3 = +3.3 VDC Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Pin 1 & 2 Connection Blank = Pin 1 and 2 N/C T = Pin 1 - Enable/Disable Pin 2 - No Connection N = Pin 1 - No Connection Pin 2 - Enable/Disable Packaging Blank = Bulk T = Tape and Reel Enable / Disable Function Blank = Positive Enable G = Negative Enable Please Consult with MMD Sales Deparment for any other Parameters or Options Mechanical Details Tape & Reel Dimensions PITCH TAPE WIDTH REEL DIA Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 PITCH TAPE WIDTH REEL DIA QTY PER REEL PIN 1 ORIENT. 8.00 [.315] 16.00 [.630] 180[7 IN] 1000 Q1 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters. 3. Tolerances are ±0.10 [.004] mm unless otherwise specified. 4. Do not scale drawing. DIRECTION OF FEED MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com Revision: Subject to change without notice 10’24/13 P Pg 2 of 2