X Series Crystal Ο 2mm X 2.5mm 4 Pads Ceramic Package Ο Ultra-miniature Profile Ο RoHS Compliant Ο Tape and Reel Packaging Frequency Range 16.000MHZ to 60.000MHZ Frequency Tolerance / Stability (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature -40°C to +85°C Aging ±2ppm / per year Shunt Capacitance 3pF Max Load Capacitance 10pF Standard (See Part Number Guide for Options) Equivalent Series Resistance See ESR Chart Drive Level 100µW Max Insulation Resistance 500 Megaohms Min at 100VDC Environmental & Mechanical Detail Shock MIL-STD-883, Method 2002 Cond B Marking Detail First Line = MXX.X (not to exceed 5 characters) Solderability MIL-STD-883, Method 2003 M Solvent Resistance MIL-STD-202, Method 215 XX.X Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A MSL Level 1 per IPC/JEDEC J-STD 20 = MMD Device Frequency = (four digits including decimal point) Second Line = SYWW (not to exceed 5 characters) S YM = Internal Code = Date Code (Year/Month) MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com . Revision: Specifications are subject to change without notice. 09/04/13 F Pg 1 of 2 ESR Chart Frequency Range ESR (Ohms) Mode / Cut 16.000MHZ to 19.999MHZ 120 Max Fund / AT 20.000MHZ to 29.999MHZ 80 Max Fund / AT 30.000MHZ to 60.000MHZ 50 Max Fund / AT Part Number Guide Mechanical Details Tape & Reel PITCH 16.00 Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 REEL DIA DIRECTION OF FEED PITCH TAPE WIDTH REEL DIA COUNT PIN 1 ORIENT. 4.00 [.157] 8.00 [.315] 180 [7.0] 1000 Q1 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters [inch]. 3. Tolerances are ±0.1 [.004] mm unless otherwise specified. 4. Do not scale drawing. MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com . Revision: Specifications are subject to change without notice. 09/04/13 F Pg 2 of 2