MVIH Series VCXO Hermetically Sealed Ceramic SMD Package +2.5VDC, +3.3VDC, or +5.0VDC Supply Voltage Tape and Reel Available RoHS Compliant Supply Voltage (Vdd) +2.5VDC ±10% Frequency Range Tristate ±10 ppm (See Part Number Guide for Options) (See Part Number Guide for Options) -40°C to +85°C 60mA max 60mA max 85mA max 15pF 30pF 30pF HCMOS 10% Vdd max 90% Vdd min 40%/60% 10nSec max 10mSec max 1.25 VDC ±1.00 VDC 1.65 VDC ±1.50 VDC 2.50 VDC ±2.00 VDC (See Part Number Guide for Options) (See Part Number Guide for Options) Logic “0” or Ground Osc Disabled High Impedance on Pin 4 Logic “1” (or no connect) Output Enabled Environmental & Mechanical Detail Solderability Vibration Reflow Solderability +5.0VDC ±10% 1.544MHZ TO 50.000MHZ 1.544MHZ TO 180.000MHZ Frequency Stability at +25°C Frequency Stability (Inclusive of Temp., Load, Voltage and Aging) Operating Temp.Range Storage Temp. Range Supply Current Load Output Logic “0” Logic “1” Symmetry (50% of waveform) Rise / Fall Time (10% to 90%) Start Time Control Voltage Linearity Pullability Shock +3.3DC ±10% MIL-STD-883, Meth 2002, Cond B MIL-STD-883, Meth 2003 MIL-STD-883, Meth 2007, Cond A 260°C for 10 seconds Gross Leak Test MIL-STD-883, Meth 1014, Cond C Fine Leak Test MIL-STD-883, Meth 1014, Cond A Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ S = Internal Code YYWW = L = Line 2 = SYYWWL 4 Numerical Digit Date Code (Year / Week) Jan 27 2011=1105 Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com In the event of conflict, the requirements of this specification shall govern. Specification subject to change without notice Revision: 10/22/14 R Pg 1 of 2 Part Number Guide MVI Frequency H 5 x 7 Ceramic SM VCXO 6 Pads Supply Voltage Output H = HCMOS 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Frequency Stability 010 = ±10 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Linearity Pullability D = ±50 ppm min P = ±80 ppm min C = ±100 ppm min Blank = ±20% max X = ±5% max Y = ±10% max Z = ±15% max Pin 2 & 5 Connection Blank = Pins 2 & 5 = N/C H = Pin 2-Tri-state, Pin 5-N/C R = Pin 2-N/C, Pin 5-Tri-state T = Pins 2 & 5 = Tri-state Packaging Blank = Bulk T = Tape and Reel Please Consult with MMD Sales Deparment for any other Parameters or Options Mechanical Details Tape & Reel Dimensions MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com In the event of conflict, the requirements of this specification shall govern. Specification subject to change without notice Revision: 10/22/14 R Pg 2 of 2