MCC Micro Commercial Components THROUGH HOLE - AXIAL LEADED Through Hole Package Quantity Case Style Box/Bag Qty Bulk Tube Qty Available Packaging (pcs) 13” Tape & Reel Tray Qty Qty 5000 Ammo Pack Qty A-405 DB-1 2500 50 DO-15 500 4000 3000 DO-201AD 500 1200 1200 DO-201AE 500 1200 1200 DO-35 10000 10000 DO-35G 10000 10000 DO-41 1000 5000 5000 DO-41G 1000 5000 GBJ 750 15 GBP 1250 25 GBPC 50 GBU 1000 20 ITO-220AB 1000 50 ITO220AC 1000 50 KBJ 1000 15 KBPL 1000 MB-1 5000 100 MB-35 50 MB-35D 50 MB-35W 50 MB-50W 50 MP-50 50 MP-50W 50 PB-10 200 PB-3 200 PB-6 200 PRESSFIT 100 R-1 5000 R-3 500 3000 R-6 200 500 450 RA 1000 RB-15 1000 RS-4L 400 100 SRA 1000 TO-126 1000 50 TO-18 100 TO-220 1000 50 TO-220AB 1000 50 TO-220AC 1000 50 TO-39 50 TO-92 1000 2000 TO-92L 1000 2000 TO-92MOD 500 TO-92S 3000 2000 WOM 1000 Please note that these are packing minimums only and do reflect order minimums. For minimum order quantities please contact the factory. 180 www.mccsemi.com TM MCC TM Micro Commercial Components THROUGH HOLE - AXIAL LEADED Taping Specifications Description Component Pitch Dimension A Case Style Specification(mm) DO-15, DO-35, DO-41, DO-7, A5.0±0.5 405, R-3, R-1 5KP, DO-201AD, R-6 10.0±0.5 B All 52.4±1.5 [C1 - C2] All 1.0 Max. D All 0.5 Max. E All 1.2 Max. G All 1.5 per 10 pitch H All 0.8 Max. J All 6.0±0.4 Beginning and end of reel or ammo pack 300.0 Min. Consecutive missing components not allowed <0.1% All polarized components shall be oriented in the same direction. The cathode tape shall be colored and the anode tape shall be white or light beige. Inside Tape Spacing Lead To Lead Eccentricity Lead Extension Lead Bending Cumulative Pitch Exposed Adhesive Tape Width Tape Leader Empty Spaces Polarity Marking C2 C1 D Dimensions apply to both sides of the reel A G B E H J www.mccsemi.com 181 MCC Micro Commercial Components THROUGH HOLE - AXIAL LEADED Reel Dimensions Description Reel Diameter Dimension A Core Diameter (Outside Dimension) Arbor Hole Diameter Reel Width Specification(mm) 330 335 (DO-35 Only) 16.6±0.4 85.7±0.3 79.0±1.0 B C D A C B D Ammo Pack Dimensions Description Dimension A B C Length Width Height Specification(mm typical) 260 75 140 C A Inspection hole at both ends 182 Ammo Pack can be opened at either end depending upon desired device polarity during installation B www.mccsemi.com TM MCC TM Micro Commercial Components TO--92 THROUGH HOLE - TO Taping Specifications Description Front To Rear Deflection Left To Right Deflection Feed Hole Diameter Component Lead Pitch Feed Hole To Bottom Of Component Height Of Seating Plane Height Of Feed Hole Location Feed Hole Pitch Center Of Seating Plane Location Total Taped Package Thickness Carrier Tape Width Adhesive Tape Width Adhesive Tape Position Feed Hole Pitch Tolerance Empty Places in Tape B Dimension A B C D E G H J K M N P R ----- Specification(mm) 0±1.0 0±1.0 4.0±0.2 2.5 ±0.3 21.0 Max. 16±0.5 +0.8 9.0 -0.5 12.7±0.3 6.35±0.5 1.5 Max. +1.0 18.0 -0.5 6.0±0.5 1.0 Max. 0±1.0 over 20 pitch 0.1% non-consecutive A B A R E G P H N C D D M K J www.mccsemi.com 183 MCC TM Micro Commercial Components THROUGH HOLE HOLE - TO TOTO--92 92S THROUGH Taping Specifications Description Front To Rear Deflection Left To Right Deflection Feed Hole Diameter Component Lead Pitch Feed Hole To Bottom Of Component Height Of Seating Plane Height Of Feed Hole Location Feed Hole Pitch Center Of Seating Plane Location Total Taped Package Thickness Carrier Tape Width Adhesive Tape Width Adhesive Tape Position Feed Hole Pitch Tolerance Empty Places in Tape B Dimension A B C D E G H J K M N P R ----- Specification(mm) 0±1.0 0±1.0 4.0±0.2 2.5 ±0.3 21.0 Max. 16±0.5 9.0 ±0.5 12.7±0.2 6.35±0.3 1.52±0.2 +1.0 18.0 -0.5 6.0±0.5 1.0 Max. 0±1.0 over 20 pitch 0.1% non-consecutive A B A R E G P H N C D D M K J www.mccsemi.com 184 MCC TM Micro Commercial Components TO--92 THROUGH HOLE - TO Ammo Pack Specifications B A 330mm Max. 330mm Max. A B 340mm Max. 340mm Max. 45mm Max. 321 321 45mm Max. 321 123 Position of components when being withdrawn 123 123 Position of components when being drawn from opposite corner Direction Of Feed Notes: 1) The carrier tape consists of a cardboard strip with sprocket holes. The pins of the transistors are secured radially to the carrier tape with a heat seal type tape. 2) The tape can be taken from either of the two opposite corners, depending on the desired pin sequence. 3) The label will include a minimum of the part number, quantity and date code. 4) Each ammo pack consists of layers of 25 devices each folded in a concertina fashion. One component is missing at the end of each layer. Each position is identified by means of a double perforation across the tape. The tape is folded at the perforations. 185 www.mccsemi.com MCC TM Micro Commercial Components SURFACE MOUNT Minimum Package Quantities TYPE D-PAK D2-PAK DFN-10 GLASS MELF LMBS-1 MBS-1 MELF MINIMELF MICROMELF QUADRO MELF HSMA HSMB HSMC SDB-1 SMAE SMA SMB SMC SOD-123/323 SOD-123FL SOD-523/723/923 SOD-882 SOT-143 SOT-23 SOT-23-6L SOT-323/523 SOT-353/363/563/553 SOT-723 SOT-89 TAPE SIZE (mm) 16 24 8 12 12 12 12 8 8 8 12 12 16 16 12 12 12 16 8 8 8 8 8 8 8 8 8 8 12 BULK/TUBE QUANTITY 80 ------------------------------------------------50 ------------------------------------------------- ------------- 7 INCH REEL QUANTITY --------3000 ----------------2500 2500 2500 --------------------------------3000 2500 8000 10000 3000 3000 3000 3000 3000 10000 1000 13 INCH REEL QUANTITY 2500 800 ----5000 5000 3000 5000 ------------3000 3000 1500 1500 6000 5000 3000 3000 --------------------------------- ------------- Note 1: These are minimum package quantities only. Minimum orders will differ. Contact the factory for more information on minimum order quantities. Note 2: MCC Tape&reel products meets EIA-481 REV D specification. www.mccsemi.com 186 MCC Micro Commercial Components TAPE DIMENSIONS AND ORIENTATION (in millimeters) 16mm Tape 12mm Tape 8mm Tape SOT-23/323/523/723 MELF,GLASSMELF MICROMELF / MINIMELF SMA / SMB SMC / HSMC SDB-1 + + SOD-123/323/523/723/923 + + MBS-1,LMBS-1 D-PAK + + + + SOT-23-6L/363/563 . . . . . . . 24mm Tape 2 D -PAK asymmetrical SOT-23-6L/363/563 symmetrical DIRECTION OF UNREELING 187 www.mccsemi.com TM MCC TM Micro Commercial Components SURFACE MOUNT Embossed Carrier Tape Specifications (8, 12, 16, 24mm Tape) A 10 Pitches Cumulative Tolerance On Tape ± 0.2 J B K H L Cover Tape N E M F D For Machine Reference Only Including Draft And Radii Concentric Around Dimension ‘F’ G R (For Components 20mm x 12mm And Larger) P Feed Direction Tape Size 8,12,16,24 Tape Size 8mm 12mm 16mm 24mm H 1.5+0.1, -0.0 E (Max) 4.2 8.2 12.1 20.1 L 1.75±0.10 R (Min) 1.0 1.5 1.5 1.5 J 4.0±0.1 N 3.5±0.05 5.5±0.05 7.5±0.10 11.5±0.10 A (Max) 2.4 4.5 6.5 11.9 Tape Size 8mm 12mm 16mm 24mm Note: 2.0±0.10 X 4.0±0.10 X X X B (Max) 0.600 D, F, P See Note 1 Constant Dimensions K M Variable Dimensions 2.0±0.05 2.0±0.05 2.0±0.10 2.0±0.10 8.0±0.30 12.0±0.30 16.0±0.30 24.0±0.30 G 8.0±0.10 12.0±0.10 X X X 16.0±0.10 X D, F, P are determined by constant size. The clearance between the part and the tape cavity must be within 0.05mm min. to 0.50mm max. for 8mm tape, 0.05mm min. to 0.65mm max. for 12mm tape and 0.05mm min. to 0.90mm max. for 16mm tape. www.mccsemi.com 188 MCC Micro Commercial Components SURFACE MOUNT R Min. Top cover tape thickness 0.10mm Max. Bending Radius Tape Size 8mm 12mm 16mm 24mm R Min. 25mm 30mm 30mm 30mm 100 mm 1mm Max. 1mm Max. 250mm Camber (Top View) Allowable camber to be 1mm/100mm non-accumulative over 250mm 20° Maximum Component Rotation Typical Component Cavity Center Line Typical Component Center Line 189 www.mccsemi.com TM MCC TM Micro Commercial Components SURFACE MOUNT T B* A N C D* Full Radius * Drive spoke dimensions optional. If drive spoke is used then asterisked dimensions apply. Tape Size 8mm 12mm 16mm 24mm A Max. 330 330 360 360 B* Min. 1.5 1.5 1.5 1.5 C 13.0±0.20 13.0±0.20 13.0±0.20 13.0±0.20 D* Max. 20.2 20.2 20.2 20.2 N Min. 55 55 55 55 G (measured at hub) G +1.5 8.4( -0.0) +2.0 12.4( -0.0) +2.0 16.4( -0.0) 24.4(+2.0-0.0) T Max. 14.4 18.4 22.4 30.4 Start And Finish Specifications Cover Tape No Components* Components No Components* 400 mm Min 160mm Min *Empty component pockets sealed with cover tape Direction Of Feed www.mccsemi.com 190 MCC TM Micro Commercial Components RADIAL TAPING SPECIFICATIONS FOR RECTIFIERS A-405 Outline Only C B S F D G P H A E T N M J K PACKING METHODS P/N EXAMPLE: A=N:PANASERT ABC DIMENSIONS DIM A B C D E F G H J K M N P S T 191 INCHES MIN MAX .709 .748 .460 .540 --.106 --.205 .610 .650 --.354 --.177 .177 .217 .124 .179 .146 .169 .677 .748 .343 .384 .021 .025 --±.079 .016 .031 MM MIN 18.0 11.7 ----15.5 ----4.5 3.15 3.7 17.2 8.70 .54 --.4 MAX 20.0 13.7 2.7 5.2 16.5 9.0 4.5 5.5 4.55 4.3 19.0 9.75 .64 ±2.0 .8 NOTE B = 0: NON INSULATION COATING--LEAD FIRST OUT. 1: INSULATION COATING--LEAD FIRST OUT. 2: NON INSULATION COATING--BODY FIRST OUT. 3: INSULATION COATING--BODY FIRST OUT. C = 1: FOR CATHODE DOWN, IN BULK. 2: FOR CATHODE UP, IN BULK. 3: FOR CATHODE DOWN, IN REEL. 4: FOR CATHODE UP, IN REEL www.mccsemi.com MCC TM Micro Commercial Components RADIAL TAPING SPECIFICATIONS FOR RECTIFIERS A-405 Outline Only C E S F D Q A G B H T N M J P L K PACKING METHODS P/N EXAMPLE: A=V:AVISERT AB DIMENSIONS DIM A B C D E F G H J K L M N P Q S T INCHES MIN MAX .905 1.26 .630 ----.106 --.205 .460 .540 --.098 .193 .213 --.118 .124 .179 --.079 .488 .512 .677 .748 .343 .384 .146 .169 .021 .025 --±.079 .016 .031 MM MIN 23.0 16.0 ----11.7 --4.9 --3.15 --12.4 17.2 8.70 3.7 .54 --.4 MAX 32.0 --2.7 5.2 13.7 2.5 5.4 3.0 4.55 2.0 13.0 19.0 9.75 4.3 .64 ±2.0 .8 NOTE B = 1: INSULATION COATING/ LEAD FIRST OUT/ CATHODE UP/ IN REEL 2: INSULATION COATING/ BODY FIRST OUT/CATHODE UP/ IN REEL.. 3: INSULATION COATING/ LEAD FIRST OUT/CATHODE DOWN/ IN REEL. 4: INSULATION COATING/ BODY FIRST OUT/ CATHODE DOWN/ IN REEL www.mccsemi.com 192