MCC
TM
Micro Commercial Components
omponents
20736 Marilla Street Chatsworth
!"#
$
% !"#
Features
•
x
x
x
x
x
•
•
Meet AEC-Q101 Requirement
Low Profile Package for Surface Mountiong(Flat Handling
Surface for Accurate Placement)
Zener Voltage 10V to 200V
High Surge Current Capability
For Available Tolerances-see Note 1
Available on Tape and Reel (see E1A std RS-481)
Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
Halogen free
SMBJ5347BHE3
THRU
SMBJ5388BHE3
5 Watt
Surface Mount Silicon
Zener Diode
10 to 200 Volts
DO-214AA
(SMB) (Lead Frame)
H
Mechanical Data
x
x
•
•
x
Standard JEDEC Outlines as Shown
Marking: See page 2
Epoxy meets UL 94 V-0 flammability rating
Moisture Sensitivity Level 1
Maximum Temperature for Soldering: 260к for 10 Seconds
J
Electrical Characteristics @ 25qC Unless Otherwise Specified
Forward Voltage at
1.0A Current
Steady State Power
Dissipation
Operating and Storage
Temperatures
Thermal Resistance
VF
1.2Volts
P(AV)
5Watts See Note 2
TJ, TSTG
-55к to +150к
R șJL
15к/W
A
E
R șJA
90к/W
Note: 1.High Tempertaure Solder Exemptions Applied,see EU Directive Annex 7.
2. Lead temperature at 75к = TL at mounting plane. Derate linearly
above 75к to zero power at 150 к
3. Ambient temperature at 15к = TA at mounting plane. Derate linearly
above 15к to zero power at 150 к
C
D
B
G
DIMENSIONS
DIM
A
B
C
D
E
G
H
J
INCHES
MIN
.075
.077
.002
----.030
.200
.160
.130
MM
MIN
1.91
1.96
.05
----.76
5.08
4.06
3.30
MAX
.095
.083
.008
.02
.060
.220
.187
.155
MAX
2.41
2.10
.20
.51
1.52
5.59
4.75
3.94
NOTE
SUGGESTED SOLDER
PAD LAYOUT
0.090"
0.085”
0.070”
Revision: A
www.mccsemi.com
1 of 5
2015/06/05
MCC
TM
Micro Commercial Components
ELECTRICAL CHARACTERISTICS @25ć
MCC PART
NUMBER
SMBJ5347BHE3
REGULATOR
VOLTAGE
VZ
TEST
CURRENT
IZ
MAXIMUM
DYNAMIC
IMPEDANCE
ZZT
MAXIMUM
REVERSE
CURRENT
IR
TEST
VOLTAGE
VR
MAXIMUM
REGULATOR
CURRENT
IZM
MAXIMUM
DYNAMIC KNEE
IMPEDANCE
[email protected]
VOLTS
10
mA
125
OHMS
2
µA
5
VOLTS
7.6
mA
475
OHMS
125
MAXIMUM
SURGE
CURRENT
IZSM
A
8.6
MAXIMUM
VOLTAGE
REGULATION
VOLTS
0.22
SMBJ5348BHE3
11
125
2.5
5
8.4
430
125
8
SMBJ5349BHE3
12
100
2.5
2
9.1
395
125
7.5
0.25
0.25
SMBJ5350BHE3
13
100
2.5
1
9.9
365
100
7
0.25
SMBJ5351BHE3
14
100
2.5
1
10.6
340
75
6.7
0.25
SMBJ5352BHE3
15
75
2.5
1
11.5
315
75
6.3
0.25
SMBJ5353BHE3
16
75
2.5
1
12.2
295
75
6
0.3
SMBJ5354BHE3
17
70
2.5
0.5
12.9
280
75
5.8
0.35
SMBJ5355BHE3
18
65
2.5
0.5
13.7
264
75
5.5
0.4
SMBJ5356BHE3
19
65
3
0.5
14.4
250
75
5.3
0.4
SMBJ5357BHE3
20
65
3
0.5
15.2
237
75
5.1
0.4
SMBJ5358BHE3
22
50
3.5
0.5
16.7
216
75
4.7
0.45
SMBJ5359BHE3
24
50
3.5
0.5
18.2
198
100
4.4
0.55
SMBJ5360BHE3
25
50
4
0.5
19
190
110
4.3
0.55
SMBJ5361BHE3
27
50
5
0.5
20.6
176
120
4.1
0.6
SMBJ5362BHE3
28
50
6
0.5
21.2
170
130
3.9
0.6
SMBJ5363BHE3
30
40
8
0.5
22.8
158
140
3.7
0.6
SMBJ5364BHE3
33
40
10
0.5
25.1
144
150
3.5
0.6
SMBJ5365BHE3
36
30
11
0.5
27.4
132
160
3.3
0.65
SMBJ5366BHE3
39
30
14
0.5
29.7
122
170
3.1
0.65
SMBJ5367BHE3
43
30
20
0.5
32.7
110
190
2.8
0.7
SMBJ5368BHE3
47
25
25
0.5
35.8
100
210
2.7
0.8
25
27
0.5
38.8
93
230
2.5
0.9
SMBJ5369BHE3
51
SMBJ5370BHE3
56
20
35
0.5
42.6
86
280
2.3
1
SMBJ5371BHE3
60
20
40
0.5
45.5
79
350
2.2
1.2
SMBJ5372BHE3
62
20
42
0.5
47.1
76
400
2.1
1.35
SMBJ5373BHE3
68
20
44
0.5
51.7
70
500
2
1.5
SMBJ5374BHE3
75
20
45
0.5
56
63
620
1.9
1.6
SMBJ5375BHE3
82
15
65
0.5
62.2
58
720
1.8
1.8
SMBJ5376BHE3
87
15
75
0.5
66
54.5
760
1.7
2
SMBJ5377BHE3
91
15
75
0.5
69.2
52.5
760
1.6
2.2
SMBJ5378BHE3
100
12
90
0.5
76
47.5
800
1.5
2.3
SMBJ5379BHE3
110
12
125
0.5
83.6
43
1000
1.4
2.5
SMBJ5380BHE3
120
10
170
0.5
91.2
39.5
1150
1.3
2.5
SMBJ5381BHE3
130
10
190
0.5
98.8
36.6
1250
1.2
2.5
SMBJ5382BHE3
140
8.0
230
0.5
106
34
1500
1.2
2.5
SMBJ5383BHE3
150
8.0
330
0.5
114
31.6
1500
1.1
3
SMBJ5384BHE3
160
8.0
350
0.5
122
29.4
1650
1.1
3
SMBJ5385BHE3
170
8.0
380
0.5
129
28
1750
1.0
3
SMBJ5386BHE3
180
5.0
430
0.5
137
26.4
1750
1.0
4
SMBJ5387BHE3
190
5.0
450
0.5
144
25
1850
0.9
5
SMBJ5388BHE3
200
5.0
480
0.5
152
23.6
1850
0.9
5
www.mccsemi.com
Revision: A
2 of 5
2015/06/05
MCC
SMBJ5347BHE3 thru SMBJ5388BHE3
Marking Code Info.
MCC
369B
Cathode Band
Logo
Type No.
For Example: 339B for SMBJ5339BHE3
369B for SMBJ5369BHE3
Note 1
Devices listed have a ± 5% tolerance on nominal V Z.
_
Suffix C denotes a +2%
Note 2
Nominal Zener Voltage (V Z) is tested with a 40 +/-10
milliseconds pulse current at 25°C to avoid self-heat affection.
Note 5
The Maximum Zener Current (I ZM) shown is for ± 5%
tolerance devices. I ZM for ± 10% and ± 20% devices
can be calculated using the formula:
IZM =
P
V ZM
Where “V ZM” is V Z at the high end of the voltage
tolerance specified and “P” is the rated power of the
device.
Note 3
Note 4
The Zener impedance (Z ZT or ZZK is derived from the 60
HZ ac voltage, which results when an ac current having
a rms value equal to 10% of the dc zener current (I ZT or
IZK) is superimposed on I ZT or IZK respectively.
Note 6
The Surge Current (I ZM) is specified as the maximum
peak of a nonrecurring sine wave of 8.3 milliseconds
duration.
Note 7
Voltage Regulation ( ∆VZ) is the difference between the
voltage measured at 10% and 50% I ZM).
The Maximum Reverse (leakage) Current is specified
for devices with ± 20% and ± 10% voltage tolerances
on nominal V Z in another column.
Revision: A
www.mccsemi.com
3 of 5
TM
Micro Commercial Components
2015/06/05
MCC
TM
Micro Commercial Components
RATING AND CHARACTERISTICS CURVES
PD, MAXIUMU POWER DISSIPATION (WATTS)
SMBJ5347BHE3 THRU SMBJ5388BHE3
7
5
θVZ , TEMPERATURE COEFFICIENT
(mV/°C) @ I ZT
6
TL
4
3
2
1
TA
0
0
20
40
60
80
100
300
200
100
RANGE
50
30
20
10
5
0
20 40 60
80 100 120 140 160 180 200 220
VZ, ZENER VOLTAGE @IZT (VOLTS)
120
TL,LEAD TEMPERATURE
TA, AMBIENT TEMPERATURE
Fig. 1-POWER TEMPERATURE DERATING CURVE
Fig. 2-TEMPERATURE COEFFICIENT-RANGE FOR UNITS
1 0 TO 51 VOLTS
T = 25
IZ, ZENER CURRENT (mA)
IZ, ZENER CURRENT (mA)
1000
TC = 25
1000
100
10
1
0.1
1
2
3
4
5
6
7
8
9
T = 25
100
10
1
10
0.1
VZ, ZENER VOLTAGE (VOLTS)
10
20
30
40
50
60
70
80
VZ, ZENER VOLTAGE (VOLTS)
Fig. 3-ZENER VOLTAGE VERSUS ZENER CURRENT
VZ = 10 VOLTS
Revision: A
Fig. 4-ZENER VOLTAGE VERSUS ZENER CURRENT
VZ = 11 THRU 51 VOLTS
www.mccsemi.com
4 of 5
2015/06/05
MCC
TM
Micro Commercial Components
Ordering Information :
Device
Packing
Part Number-TP
Tape&Reel: 3Kpcs/Reel
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
Revision: A
www.mccsemi.com
5 of 5
2015/06/05