PLANAR TRANSFORMERS HIGH FREQUENCY 30 WATT PP18D SERIES • Power Rating Up to 30 Watts • High Efficiency • Footprint 19.6 mm X 18.0 mm • Lower Profile of 7.4 mm • High Isolation (operational) 1500 Vdc • High Frequency 300 KHz – 3.0 MHz • Operating Temperature -40ºC to +125ºC • Custom Design Available ELECTRICAL PARAMETERS @ 25°C Part Number DC Resistance Turns Ratio PP18D- Primary Inductance (μH MIN) Leakage Inductance (μH MAX) Primary Secondary Primary Secondary 0601 48 0.50 50.0 1.50 6T 0602 48 0.50 50.0 3.00 0603 48 0.40 50.0 20.0 0606 48 0.40 50.0 0608 48 0.30 50.0 (mΩ MAX) Isolation (VDC) Figure 1T // 1T 1500 A 6T 1T+1T 1500 A 6T 3T 1500 B 40.0 6T 6T 1500 C 60.0 6T 8T 1500 C 0610 48 0.30 50.0 80.0 6T 10T 1500 C 1201 190 1.50 156 1.50 12T 1T // 1T 1500 A 1202 190 1.50 156 3.00 12T 1T+1T 1500 A 1203 190 1.30 156 20.0 12T 3T 1500 B 1206 190 1.30 156 40.0 12T 6T 1500 C 1208 190 1.15 156 60.0 12T 8T 1500 C 1210 190 1.15 156 80.0 12T 10T 1500 C APPLICATION OF CONFIGURATION APPLICATION OF CONFIGURATION Part Number PP18D- Vin Vout / Iout Part Number PP18D- Vin Vout / Iout 0601 18 – 36 Vdc [email protected] [email protected] 1201 36 – 75 Vdc [email protected] [email protected] 0602 18 – 36 Vdc [email protected] -- [email protected] 1202 36 – 75 Vdc [email protected] -- [email protected] 0603 18 – 36 Vdc 5.0V@6A 1203 36 – 75 Vdc 5.0V@6A 0606 18 – 36 Vdc [email protected] -- [email protected] 1206 36 – 75 Vdc [email protected] -- [email protected] 0608 18 – 36 Vdc [email protected] -- [email protected] 1208 36 – 75 Vdc [email protected] -- [email protected] 0610 18 – 36 Vdc [email protected] -- [email protected] 1210 36 – 75 Vdc [email protected] -- [email protected] NOTES: 1. The inductance is measured in primary windings Pin (1-2) at 100 KHz 100 mVrms 2. The leakage inductance is measured in primary winding Pin (1 -2) with all other windings shorted Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com [email protected] PLANAR TRANSFORMERS HIGH FREQUENCY 30 WATT PP18D SERIES DIMENSIONS (mm) SUGGESTED PAD LAYOUT SCHEMATICS Figure A Figure B Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 Figure C Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 www.mpsind.com [email protected]