COMMON MODE CHOKE P52TM16 SERIES • Toroidal core type common mode choke • Dielectric withstanding voltage: 2000 Vrms (between windings) • Operating temperature range: -40°C to +85°C • Vertical mount version (horizontal mount version and custom design available upon request) • RoHS compliant product ELECTRICAL PARAMETERS @ 25°C Part Number P52TM16- Inductance (mH) (Min) Rated Irms (A) DCR (Ω MAX) Dimension A (inch Max) Dimension B (inch Max) Dimension Dimension C D (±0.010 inch) (±0.010 inch) Dimension E (inch Max) Dimension F (±0.005 inch) 303-2.3 30.0 2.3 0.330 1.35 0.81 0.900 0.600 1.45 0.050 203-2.9 20.0 2.9 0.210 1.35 0.81 0.900 0.600 1.45 0.050 123-4 12.0 4.0 0.110 1.35 0.81 0.900 0.600 1.45 0.050 802-5.6 8.0 5.6 0.055 1.35 0.81 0.900 0.600 1.45 0.050 502-8.9 5.0 8.9 0.022 1.45 0.81 0.900 0.600 1.50 0.043 252-12.5 2.5 12.5 0.011 1.45 0.81 0.900 0.600 1.50 0.053 Note: 1. 2. 3. 4. 122-16 1.2 16.0 0.006 1.50 0.81 0.900 0.600 1.53 0.060 503-2.3 50.0 2.3 0.450 1.55 0.81 0.900 0.600 1.65 0.050 363-2.9 36.0 2.9 0.300 1.55 0.81 0.900 0.600 1.65 0.050 732-9.3 7.3 9.3 0.032 1.65 0.81 0.900 0.600 1.65 0.043 Inductance measured: 1KHz, 0.1Vrms Polarity: 1 and 4 are in phase Turns Ratio: 1:1 (1-2 to 4-3) ΔT of 35°C Temperature Rise at rated current DIMENSIONS (inch) Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.008 .XXX : ±0.004 mm: X,X : ±0,20 X,XX : ±0,10 www.mpsind.com [email protected]