MAGNETIC EPOXY SHIELDED SMT POWER INDUCTOR PSF8040 SERIES • Magnetic shielding using magnetic epoxy resin results in lower costs as compared to traditional ferrite shielded inductors • Size: 8.7mm length x 8.6mm width x 4.0mm height • Operating Temperature -40ºC to +120ºC • RoHS Compliant Product • Custom Design Available ELECTRICAL PARAMETERS @ 25°C Part Number PSF8040- INDUCTANCE (μH) ±20% Isat (Adc) MAX DCR (Ω) MAX 100M 10 3.20 0.038 150M 15 2.60 0.058 220M 22 2.20 0.075 330M 33 1.80 0.110 470M 47 1.50 0.160 680M 68 1.20 0.230 101M 100 1.00 0.330 151M 150 0.80 0.490 221M 220 0.60 0.730 331M 330 0.50 1.10 681M 680 0.30 2.20 Note: 1. Inductance measured at 100KHz, 1Vrms 2. Isat: ∆L drops 30% max from its initial value DIMENSIONS (mm) Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 www.mpsind.com [email protected]